GIMP :: 5 Images On One Sheet Of Paper?
Aug 11, 2011
I What I'm trying to do is take an image off the net (mainly Marvel and DC characters) and open them up in GIMP and making the "reverse" image of that file. So I will have the character twice, but when printed I can paste the two back to back and they both show the same image, back and front....hope that made sense.
Also, how would I put, lets say, 5 images on one sheet of paper? I don't want to print just one image on 1 sheet and waste so much paper. I'd like to get 4 -6 on 1 sheet of paper, print them out and glue them back to back for my paper miniatures.
View 6 Replies
ADVERTISEMENT
Nov 22, 2013
how to create a greeting card using 2 images on a single sheet of 8x10 paper, then cutting sheet in half for 2 cards.
View 2 Replies
View Related
Oct 27, 2010
I am using an r1900 Epson a3 printer. I am trying to print my images on A3 paper however no matter what settings i change they always appear as a4. I have change the scale, fit to canvas and page set up all with no effect.
View 1 Replies
View Related
Feb 15, 2013
I would like to know how I can produce multiple identical small images (10mm x 10mm) on the same sheet of paper?
I used to be able to do this in older versions of Adobe Photoshop.
View 6 Replies
View Related
Jan 2, 2014
I wanted to set up a template for dealing with printing four images on a sheet.
I created an image the size of the sheet and then added four layers, each of the desired image size which needed to be positioned appropriately.
When I went to position the images, I could not find any reasonable way with the move command or with any of the layer operations to position each layer precisely.By that I mean simply type in the coordinates of the upper left corner, or move with the mouse where I see a text version of the upper left coordinate of the new layer position as I move.
If trying to position using the mouse, the lower left of the status line shows the position of the pointer itself, so that is useless in positioning the layer as a whole; and the numbers to the right of the per-cent size display show how much the layer has moved relative to its starting position, not the absolute position of the upper left corner. (I'll grant that the latter is useful, but in this case one needs something else, particularly if a layer has been moved and needs to be repositioned to a fixed location.)
The only way I could get what I wanted was to expand to 800%, and at that magnification I could grab the upper left corner with the mouse so the mouse position was itself the upper left corner position. Surely there's a better way?
Layer/Layer to Boundary Size... does not appear to work as advertised. The offset appears to be relative to the original size of the layer, not the original size of the image. The panner image is limited to the size of the layer, not the image. When you first bring up the dialog, you are unable to reposition the layer unless you change the layer size to make the layer smaller. If you make the layer half the size of its original size and then click "Center", the offset is set to - 1/2 the size of the original image, not + 1/2, which seems bizarre. The layer is scaled properly, and ends up where you would expect (based on the center command given, but not based on the offsets indicated), but the values in the Offset boxes seem to have the wrong sign. It works by moving the original layer relative to the desired new layer, rather than position the new layer size relative to the image. Which means you can't move the layer relative to the image if the layer is smaller than the image, and the graphic panner doesn't show you the layer position relative to the image as a whole. It is not at all intuitive and is not useful for quite a few common cases.
Layer/Transform/Offset shifts the contents, but not the layer itself. Which is what it is supposed to do, so that's ok; it's just not usable for this operation.
View 10 Replies
View Related
Jun 13, 2010
I have some large images that I would like to print at full size, which will involve tiling across multiple sheets of paper. I can't seem to find a way to setup tiling at the Print dialog or through Gutenprint.
View 3 Replies
View Related
May 28, 2013
"Contact page" when images get transported on to page they reduce in size.I have also tried dragging the pictures onto the page but they still reduce in size.
View 2 Replies
View Related
Jun 28, 2012
Any way to print sheets from AutoCAD onto one sheet of paper, side-by-side?
The reason this came up is because yesterday I printed a half size set on our new plotter using twice the paper I needed. Each sheet printed on half of a 36”x12” sheet of paper (print is 18”x12”). I was throwing away 18” per print. What would be awesome is to be able to get another print onto that wasted 18”.
how to get two (or more) prints on one sheet of paper?
View 6 Replies
View Related
Apr 25, 2012
I cant seem to scale my drawing to fit right on an A3 sheet of paper. I have done the drawing in mm its my first project.
View 9 Replies
View Related
May 25, 2010
My work entails regenerating new drawings from aging specification drawings and figures. Very little actual CAD, more hand-tracing JPGs than anything. I'm new to AutoCAD LT and haven't used most of its features. But the one feature I really need right now is to be able to print a black box on a sheet of paper.
As in, a 2-D closed polygon with a solid black fill. Unfortunately, AutoCAD LT doesn't think I should be allowed to print a black box on a sheet of paper.
I've tried assigning the color to the box using properties. I've tried defining layers and moving the box to the "black" layer (funny that "black" isn't a defined color in AutoCAD...that's way cool...). I've tried various settings in the Plotter setup screen.
I have a color plot table selected and I'm trying to print to .PDF. I work strictly out of the model view and do a lot of print previews. What am I, or have I, done, or not done, that I'm supposed to be doing, to print the box?
View 9 Replies
View Related
Feb 3, 2012
I am using Adobe Illustrator CS3. When I print to my new LaserJet, documents that are not a full page in size are having the items shifted on the hard copy print out. Specifically, while the font and graphics are not changing in size, all items are shifting to the top of the sheet of paper during printout (i.e. the hard copy does not match what is shown on my screen.)
No Microsoft files are printing improperly, only Acrobat and Illustrator are displaying this issue.
View 5 Replies
View Related
Dec 10, 2013
I am trying to print 2 5x7 pics on one sheet of 8.5x11 paper. On the screen everything looks fine. I rotate the image, then uncenter the image to the top edge. I print the picture once, put the sheet back in turned 180 degrees, then print again. In previous versions this worked fine. Now, in version 11, it does not want to work. I have tried changing the size settings to custom 5x7. It still does not work. The image comes out 5" horizontally including a 1/4" border. Vertically, it comes out 5", no border. I am wasting a lot of paper trying to figure out where the problem is to no avail.
View 1 Replies
View Related
Jul 15, 2013
How do I print 2 different 5x7 photos on the same 81/2x11 sheet of photo paper
View 1 Replies
View Related
Oct 8, 2013
This is an issue for which no one in my office has any solution. We create all of our plan sets on E1 size paper. However, when we plot them for redlines we print to C-size to save paper. I know you can "publish selected layouts" to plot numerous tabs at a time. However, I am unable to figure out how to make them plot to a smaller size paper than what the page is set up for. Is there a way to plot all of the tabs at a smaller scale without plotting each tab individually?
We just recently upgraded to AutoCad 2014.
View 3 Replies
View Related
Sep 15, 2011
How does one accurately rotate the view so that view in paper space is parallel and perpendicular to the border sheet without guessing the angle?
View 3 Replies
View Related
Nov 24, 2012
How do you print multiples of a business card size picture on one sheet of paper? Tried using columns, but not printing multiples.
View 3 Replies
View Related
Jan 9, 2007
if I could convert a 2d bitmap image in a way to make it have more depth like if I printed it on a 4x5 photo machine. Its for gift cards designed on the computer, but I am working with the source images which are 2d and not glossy like the finished cards. How can I achieve that look?
View 3 Replies
View Related
Oct 25, 2012
completely new to printing in LR.
View 4 Replies
View Related
Mar 1, 2006
I tried to make an image that, when printed, would take up the entire sheet of paper (having removed the margins in the printing properties), but I seem to have failed.
I made the image 8.5 x 11 inches, but when I printed a test at that size it came out too small... is there a % bigger that I need to make the image to fit, or did I go wrong somewhere else?
View 2 Replies
View Related
Jul 20, 2012
I usually process or edit my images for the internet using 72 dpi and using dimensions that fits my liking. I want to process some photos for printing(i.e the paper used for printing family and social photos; I believe you understand what I mean?). please, what dpi or ppi do I use on gimp? Btw,what do photographers call such a paper?
View this message in context:[URL]......
View 1 Replies
View Related
Dec 21, 2013
I run MacOS 10.9, Lightroom 5.3 and I print on an Epson R3000.
The first problem I had was that the images was printed on just a small part of the paper and it cut the images. I have attached a picture showing this. I totally reinstalled my computer and now it looks like that problem is gone (for now at least). But now the images are printed but much smaller than the paper I specify. If I specify A3+ I get something close to A4. Borderless printing on 6*4 looks to be working as it should but that's the only I managed to print so far.
I tested printing from Photoshop 5.1 and that worked fine.
View 16 Replies
View Related
Jun 9, 2011
Is it possible to add a custom paper size to Gimp? I have a new HP wide format printer and was looking for a capability to customize the paper size. Hewlett Packard and Microsoft have said that the customization of paper size is application specific even though Microsoft tells you can customize paper size through server properties , which on my XP machine will not save the custom settings.
Note: This page, even though it is not a Microsoft page, shows what Microsoft tells you to do. [URL]
View 6 Replies
View Related
Dec 11, 2013
creating a background that looks like old faded paper.
View 1 Replies
View Related
Dec 20, 2013
I used scale image to make a 2.314" x 3" image to print so it'll fit in a frame that I have for that same size. When I print it out the size looks great but it's over on the edge of the 4x6 paper and most of the picture is cut off. I tried, I should use print size and not canvas size but when I change the print size to 4x6 it also changes my canvas size back to 4x6. I still have my original so I can do this again but what I want is a 2.314"x3" image to print out on my 4x6 glossy paper.
View 2 Replies
View Related
Sep 23, 2012
I've been printing out a lot of black and white photos on photopaper on a HP Photosmart 7510e.
The printouts are very dark so I've had to boost the brightness levelsin GIMP prior to printing. The problem is that this takes extra timeand I also don't want to save these levels in the XCF file. I would say that (going by the Gamma Display Filter) the printouts are around40% of the brightness they ought to be.
View 3 Replies
View Related
Mar 4, 2013
Lightroom 4 consistently crashes every time I attempt to print a contact sheet containing over 12 images. Any less and the task is completed without error, any more and it inevitably crashes.
My workaround has been to export the images and create large contact sheets in Photoshop CS6, but this takes twice as long. This is a daily task and is significantly disrupting my workflow.
View 2 Replies
View Related
Mar 27, 2011
But I wouldn't be able to upload a hundred tiny, plain images. I made this to add onto the background removal FAQ. I hope it's accepted.
[URL].......
(Image is clickable.)
View 10 Replies
View Related
Sep 24, 2013
I have a job to photograph 300 items and use lightroom to number each one with its own product code.
Then I need to add the barcodes to the images so the client can scan them
They have a spread sheet with all the data on but can a sript be written to do this action ???
View 2 Replies
View Related
Apr 13, 2012
I have hundreds of photographs to print ranging from 2x3" up to 8x10" and I want to print them all off on a 44" roll and cut them out individually.
All I want to do is point Photoshop to the folder and have it arrange the images in the most efficient configuration for printing automatically, allowing me to set the color management on the document and the dpi of the 44" wide picture before I print it.
View 1 Replies
View Related
Dec 21, 2013
I have a PNG of sprites similar to this:
[URL].........
I want to change the background color to a transparent one. I've tried using Color to Alpha but that makes the sprites themselves partially transparent which is not what I want. My second attempt was to use the fuzzy select tool to select all of the white bits and remove them. This doesn't really work either because on a non white background each of the sprites has a few whitish pixels around it's edge. So what I really want is a combination of the two, i.e. all of the white pixels are made completely transparent, and the whitish pixels on the edge of each sprite are made partially transparent, but the sprites themselves remain opaque.
View 1 Replies
View Related
Jul 18, 2012
Can you change the order of images in contact sheet in Lightroom 4 Print module?
View 2 Replies
View Related
