I tried to make an image that, when printed, would take up the entire sheet of paper (having removed the margins in the printing properties), but I seem to have failed.
I made the image 8.5 x 11 inches, but when I printed a test at that size it came out too small... is there a % bigger that I need to make the image to fit, or did I go wrong somewhere else?
I have some large images that I would like to print at full size, which will involve tiling across multiple sheets of paper. I can't seem to find a way to setup tiling at the Print dialog or through Gutenprint.
View 3 Replies View RelatedI am in the process of completing my Photographic website and need to make thumbnail and larger sizes for the the site. The site will have approximately 100 images on it. Clicking the thumbnails will connect to the larger images. How do I make both sizes in PS CS? Perhaps their is a generator that you would recommend for Mac 10.2?
View 3 Replies View Relatedhow i can insert a new paper size or edit a paper size in plotting
View 2 Replies View RelatedI am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies View RelatedQÂ Â I am trying to set the paper size for a H 30cm x W 80cm image using roll paper on an Epson R3000 printer. Computer Dell I7 64b and using Elements 9.
View 3 Replies View RelatedOur supplier sent us some wierd size pdfs that are not full size or half size. I am trying to resize them to full size pdfs (Arch D) but am unable to figure this out in Acrobat.
My work-around is to insert them in AutoCAD and scale them based on known dimensions, then print to pdf. Unfortunately the resulting file is collosal and the quality degraded.
I am trying to make paper cd cases and I have made a cut-out/print-out version of it on photoshop cs2. I, however, am not sure at what size to print it out at. This may sound dumb, but I just held the cd up the the computer screen to see if it would be the right size and according to the screen it is, but not when I print it out.
View 2 Replies View RelatedI am making an independent film. And I've decided to use Photoshop to make the Poster...but theres one problem. We'll...3 actually. Hopefully someone could help me out and I would greatly appreciate it. Even if you can only answer one, I will still greatly appreciate it.
1. What would be the coordinates if you want to make a Poster?
2. How about a full paper. What size does the Photoshop picture got to be to fit a piece of paper perfectly?
3. How about DVD covers? Either just the front or the front and the back.
Using ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
I have tried numerous times to make my paper size and actual plot size the same. My paper size is 24 x 36 but for some reason it rotates the paper and the output is 36 x 36, every time! When I look at it on the preview, it looks correct but then the paper comes out with a foot of paper at the top of the drawing. I've created new page sizes, etc.
View 9 Replies View RelatedI have a prob with the Paper size and the Cell Size not matchng in LR4 using a Sony UP-DR150 printer.
Â
I'm running on Windows home premium 64bit,
Â
i have installed the Sony 64 bit printer driver.
Â
When i print the photo, it prints to the size 4.31 x 3.12 on the 5x7 paper.
I want to make a logo for a one page flier and my website.
Is it best to set the size of the logo in Photoshop before I create it, or should I make it in Photoshop then reduce the size of the file as required?
where I can find script/plugin/software for making images composed of images. I'm desperately needing this for an non-profit assigment. Any help would be very much appreciated!
I'm looking for a script, software or photoshop plugin or anything that could help me with this.
What I want to do is this: Out of ~ 1000 pictures I want the software to arrange them into visualizing an image which I have choosen.
Which version of Photoshop was the first one to have full size tool bar icons? I have CS6 and they are tiny.
View 18 Replies View RelatedI've been working with Canon .CR2 files and later Adobe .dng files for years, and could always open them in Photoshop. Now, with PS CC, the files open as small previews (420 x 280 px) instead of the full size. This means I cannot work with my photographs!
View 7 Replies View RelatedI go through a lot of sketch stages to get to a final picture, and I sometimes print on legal paper. My Brother printer does fine at that with Apple Pages, MSWord, Acrobat, and Illustrator, but with Photoshop there's a problem. I set up a legal-size image in PS, go through all the settings I can find for printing to a non-letter-format sheet, hit print, and what I get is a letter-size patch of image on a legal-size sheet. Clearly, either I am missing something or PS is missing something.
View 3 Replies View RelatedI'm confused by these two brush tips. I have CS2 and in the Edit / Preferences / Display & Cursors there is the Normal Brush Tip and the Full Size Brush Tip. The Normal shows that the cursor corresponds to about 100%of the area it draws; the Full Size shows that it is bigger than the area it draws.
Two questions:-
1. What is the use for this latter cursor?
2. Why does it say in the User Guide and the Help that the Normal "corresponds to approximately 50% of the area that the tool will affect" and the Full Size "corresponds to nearly 100% of the area that the tool will affect"?
Mighty puzzling, although it has already been acknowledged that the User Guides are poor. Is this an example or am I missing something?
For some unknown reason when I try to open an image file using PSE9 the image opens at 1% resolution instead of full screen. I have to manually enlarge the file to 100% and then enlarge it's window as well. I've already tried re-installing the software but the problem persists. Using Mac OS10.6.8
View 6 Replies View Relatedbefore when i wanted a 8.5" X 11" size i would just put a piece of paper on my screen and size it up with what i had in PS....i know barbaric right !
the only reason i do that is when i make a new Doc and use a preset " Letter " it pulls up huge on the screen 25% , not actual size.
How do I resize a full size photo to fit into a round locket, I'm using CS2.
View 1 Replies View RelatedCan not view image at full size when in liquify. e.g. the image is much smaller when you select liquify and when you enlarge it it pixelates. Is there a adjust or is something wrong with my Elements?
View 10 Replies View RelatedI'm trying to print a 24 x 34 print to an HP Z3100.Everything sets fine in the HP driver, but when it comes back to the Photoshop print dialog box, PS still thinks it's printing to an 8 1/2Â x 11 sheet.
Â
How do I get Photoshop to 'listen' to what the printer is supposed to be doing?
How can I convert drawings on paperspace into PDFs and DWFs with the correct scale? Â I measured everything on paperspace and it's right; but if I convert them to PDFs and DWFs everything srinks a little and the scale doesn't match at all. Â What settings or ways to match the scale into what it's suppose to be to convert it to PDFs and DWFs?
View 4 Replies View RelatedI'm working on a large image and while the Organizer is fine with it, neither the Editor nor the Full Screen view of the Organizer will work with it.
Â
Currently I have MaxImageSize at 200M, but can't find a similar setting for the Editor, and clearly it doesn't work for the full screen view either, so if there is a setting that enables these functions, that would be useful information.
Im trying to create a new paper size preset in PS CS6. I was told if I went to my PS folder, I will find a folder named presets. Inside that folder there should be a text document called "New Doc Sizes.txt" but it's not there. where I might find this text file in a presets folder?
Â
I have a C drive, but my folder for CS6 is on my D drive. I use Windows Ultimate 7 x64.
I am unable to select paper size from the printer driver of my EPSON printer for the iMAC using PS5. Is there a print driver I am missing?
Â
I'm able to select paper size from iPhoto on the MAC, but it also prints according to the paper size. Even though I've selected the image size as 11X14 the image is printed full paper size.
I want to print out this poster I made and I want it to completely fill the white computer paper. When I print out it leaves a white border. I made the image larger but it still leaves a border. Any ideas?
View 3 Replies View RelatedI’m designing a DVD case cover. I’m printing it with my home printer, when I’m measuring it on the paper it larger than it specified in Photoshop. I have tried to check and uncheck the “Scale to Fit Image” but its still not accurate.
My image is : 297x210
Res : 300ppi
Why the measurement on the paper and the document size in Photoshop are not the same?
Like many other users on these boards, I am unable to complete a full backup of a particular catalog on my machine using PSE 11 (or PSE 10 for that matter). I have four catalogs on this machine and three of the four complete the full backup process without any problems. That last, non-cooperating, catalog is much larger (7,389 photographs) than the others, but I do not think that this would pose a problem.
Â
I have removed all videos, audios, projects, PDFs, and audio captions (in other words, all media types other than photographs) from the catalog. The only files remaining are photographs (that is, JPG files). I attempt to complete a full backup and, when calculating the total media size, the PSE 11 application freezes at five to six percent. I have attempted this in PSE 10 as well, but with the same results.
Â
The only other item of note is this, when I search for the various media types, I see the message "no media to be displayed" in the middle of the organizer window. However, when I search for video, I do not see the message--the organizer window is blank (no text message as seen for the other media types).
Â
Lastly, I have reconnected all missing files. (None.) Optimized the catalog. Fixed errors in the catalog anyway. (None.)
Â
how I can complete a full backup of this catalog? A large cash reward awaits.
I have an HP 6500A Plus, and it should be capable of printing edge to edge, even on custom sizes. After contacting both Apple (I am running MacOS 10.8 Mountain Lion) and HP for answers, I burned a lot of time with Adobe either just plain not getting an answer because I didn't buy it or being given the run-around. I need to know what Photoshop is doing to block the available capabilities from working.
View 6 Replies View Related