I am in the process of completing my Photographic website and need to make thumbnail and larger sizes for the the site. The site will have approximately 100 images on it. Clicking the thumbnails will connect to the larger images. How do I make both sizes in PS CS? Perhaps their is a generator that you would recommend for Mac 10.2?
View 3 RepliesI am trying to optimize some images for web to have a smaller file size. I am using "Save for Web" feature, and every time I try to save a file, the actual file output size is a lot bigger than the size it shows on the "Save for Web" dialog.
For example, I have a 607 bytes .gif, when I open "Save for Web" it shows 207 bytes for 16-colors but when I save it the output file is 1.22 kb.
I tried to make an image that, when printed, would take up the entire sheet of paper (having removed the margins in the printing properties), but I seem to have failed.
I made the image 8.5 x 11 inches, but when I printed a test at that size it came out too small... is there a % bigger that I need to make the image to fit, or did I go wrong somewhere else?
where I can find script/plugin/software for making images composed of images. I'm desperately needing this for an non-profit assigment. Any help would be very much appreciated!
I'm looking for a script, software or photoshop plugin or anything that could help me with this.
What I want to do is this: Out of ~ 1000 pictures I want the software to arrange them into visualizing an image which I have choosen.
I have changed Canvas size a thousand times in my life and this has never happened before.
I have an image that is 1600 px wide and I want to trim the sides to 1260. When I start to even type in the smaller size, the file size indicated is larger (that was my first suspicion that something was not right). And sure enough, it is making the image larger?
I have bunch of images (starting usually from 50 to 300MB with layers)
I'm flattening and making sure 8 bit. Most are ending up about 48MB. but some are ending up 80 MB and others 15 MB. what determines these oddballs being so large or small after being flattened?
I do a lot of watermarking for the images on my website an created an action for that. What I did:
place water mark select both layers align left and bottom move the watermark layer up and to the right with the arrow keys (padding from the side of the picture)
Before I apply this action to my images I make them all 930 pixels in width with the original ration, so the height varies. When I apply the action to my images, on some of the images the watermark shows up just fine (like I created the action) but on some of them the watermark shows up very small or to large.
Combine these 2 images to make a slightly larger wallpaper. URls.....
View 2 Replies View RelatedFor the past one year I have been regularly editing my photographs in Photoshop (CS5 and CS3) and uploading them on my blog and my fb page.
However since the past 45 days I edited 5 albums in Photoshop but have not been able to upload a single photo on fb or on any other page. I moved browsers trying chrome, fire fox and even IE but nothing worked. I then formatted my laptop and reinstalled CS5 only to know that too was not useful.
I tried editing some photos in basic picassa and that worked well and was able to upload photos on fb and my blog. I then tried uploading some old photos (edited in photoshop) and they are getting uploaded. So I am sure this is a recent problem with photoshop.
Looking for some advice on how to attach keywords to images so that they automatically appear in website searches?
View 2 Replies View RelatedI'm on PS CS4 and an intel iMac. This may seem obvious to others, but I can't figure how the adobe navigation images (here at the top) are made. There seems to be something beyond just a gradient that is more texture oriented.
View 4 Replies View RelatedFor the past one year I have been regularly editing my photographs in Photoshop (CS5 and CS3) and uploading them on my blog and my fb page.
However since the past 45 days I edited 5 albums in Photoshop but have not been able to upload a single photo on fb or on any other page. I moved browsers trying chrome, fire fox and even IE but nothing worked. I then formatted my laptop and reinstalled CS5 only to know that too was not useful.
I tried editing some photos in basic picassa and that worked well and was able to upload photos on fb and my blog. I then tried uploading some old photos (edited in Photoshop) and they are getting uploaded.
I am working on an anime picture. I want to have two of the same images, one larger, with no background, and transparent. The other will be just the image. I have that done, but how do I get rid of the checkerboard pattern, it's difficult to work with it in the way. Also, both images move together, how do I stop that from happening?
View 6 Replies View Relatedwhen i create images in Xara they look very clear and crisp but once exported and appear on the website they lose their clarity and sharpness.
Which brings me to the question.. what is the best way to export images for a website? Are there advanced settings that I may use to improve the images appearance on the website.
Heres a link to a website: [urL]........ and Im uploading the Xara document as well.
I recently conducted a test on some RAW image files that I processed into maximum file size JPEGs, both through Adobe Camera RAW and Lightroom's Export. The Lightroom version of the same image was nearly twice the size.
View 13 Replies View RelatedI am making a DVD of a wedding and as part of a slide show of stills I want to download about 10 at a time and then display them 1 screen shot at a time .They are on a website that the groom raised for the occasion. They are around 2.34 MB jpegs each so they are small .I have X5 Ultimate and Paint Shop Pro X.
View 7 Replies View RelatedMost the the Creative Suite misbehaves with respect to the Windows 7 taskbar. One behavior that's particularly unproductive is seeing a bunch of gray icons for open application windows, and having the associated full size peek image grayed out too. I frequently work with many open image windows that I prefer to keep undocked. If they're minimized, more often than not there's a gray taskbar preview.
Once I click on the thumbnail and activate a window, the thumbnail taskbar image updates. But when I switch between applications, the updated thumbnails will usually go blank next time I peek at the PS6 taskbar.
I make regular use of a Flash image gallery that requires me to provide small square 50 x 50px thumbnails whatever the shape of the original images. The only solution I have found so far is to first manually sort my original images into landscape and portrait folders and then run a different action on each folder to create the thumbnails.
Is there any way to design an action that would work equally well on both landscape and portrait images?
How can I get Elements 9 to show me thumbnails of my large file images? When I tweak them with CS5 Elements won't show them in the Organizer.
View 4 Replies View RelatedIn develop mode how do I make the images in the film strip at the bottom larger
View 1 Replies View RelatedI have a website that I recently updated with a new logo created on Corel Draw X4 and then edited using Photo Paint X4. I resampled the image at 72 dpi and save as a jpg.
Once saved I loaded it to my Microsoft Windows Live Small Business account for upload to my website. It was a straight forward process. However, when viewing the website, I noticed that while the logo was visible using FireFox browser, it was not visible using the Explorer browser.
My first thought was that it must be a setting in the browser, but the image also failed to render when viewing the website through my smart phone browser.
This brought to mind that I had had this problem before when trying to upload an older logo design in the same manner. Some browsers just would not load the image.
So, I had this crazy thought that it may have something to do with Corel and the way it saved jpg images. So, I opened the jpg using the old Microsoft Paint program and without making any changes to it, I saved it from there. After that the image loads on the website with all the browsers that wouldn't work before.
how to blur the images for a client website..What I have done is to take 2 images and put them alongside each other, but I need to blur the area where they join to make the join look less severe.Also, I need to blur the complete outer edge of the whole image as well.
View 13 Replies View RelatedI upload my customer proofs with LR to my website for easy viewing. I would estimate that I loose 25% of potential orders due to theft. How can I protect the images on my website from being downloaded or copied?
View 4 Replies View RelatedTrying to use Adobe Edge to get faded header images on my website. Was referred to Adobe Edge because it is supposed to be easy for beginners. I was able to upload my images, but then there was no instruction/direction on what to do next. Everything I clicked just brought me somewhere else. Every time I tried adding coding to my page, it messed it up.
View 3 Replies View RelatedI want to put 6 rotating images (slide show) on the homepage of a website using corel website creator.I have tried the following:
1. Building the slide show exactly as website creator's help topics;
2. Using a jquery plugin like this one: URL....
3. Using URl.... and copying original DHTML & Javascripts.
With all the above the slideshow does not show in browser preview or in website creator's build in preview.
I have tested this in both LR4 and 4.1RC2. 3.x versions and below I never seemed to have a problem. Using Windows 7 x64 SP1.If I have an export preset that adds a text watermark, it works fine in any image that is either already smaller than, or gets resized to 3118 pixels in height. If I tell it to resize to 3119 pixels, then the watermark is never added.
I usually crop all my images to 8x10 ratio. And then dont resize them at all, so they stay at their maximum resolution.The watermark is simply a TTF Font, set to show up proportionally in the lower right corner.
Here is the 3118 pixels tall image.And here is when it is resized to 3119 pixels tall:
Our vacation pictures were on IPAD2. I accessed them and thought I was uploading them when I imported them to Lightroom3. I made panoramas and all in photoshop too. My husband asked if the images had been uploaded and I said yes. So he did synched and the update on the IPAD effectively erasing all those images. Now I find that these awesome images were not synched or imported to the computer, but just to lightroom thumbnails. Heartbroken! I can still see the thumbnails in Lightroom... My card has been formated twice since then. I don't think I can recover them there. Is it possible that there is a program that can recover those images to .jpgs from the thumbnails?
View 3 Replies View RelatedTime and time again, I have come across the issue where the thumbnail being displayed in the grid view and loupe view is not of the image itself, but of some other image. So far, the thumbnail is typically from the same folder or collection and can be either from an image that still exists or from one that I've rejected and deleted from disk previously.
If I go into develop mode, the correct image gets displayed, but the thumbnail rarely resets itself.
I've deleted the cache on previous occasions to have LR recreate the thumbnails, but I never know when I'm going to encounter this issue.
This becomes a paint when I am delete unwanted images. If the thumbnail is incorrect on my second or third pruning, I could actually lose an image I intended to keep.
I'm running Lightroom 5.3 from CC.
It seems that deleting the cache every day--maybe even several times a day--is a bit overkill, but seems to be the only way to deal with this problem.
In my mac I see everything perfect the thunbnails in lightroom looks fine, but when I upload my images online the image thumbnails is desaturated.
This is an example of one of my images Thumbnail from a website :
And thats is how it should look like (this is how it looks like when i enter the image frome the same website) :
I occasionaly edit nudes on my home computer, where my kids have access. Is there a way to keep these images hidden, their location hidden or have them not show in the library thumbnails?
View 5 Replies View RelatedWhen I create images for my web sites in X4, upload them into Expression Web, insert them into the page and use the thumbnail tool, the thumbnails appear badly pixelated, as though they were posterized. This did not happen when using PSP8. I save my images for the web as 72 DPI, uncompressed JPEGs. There must be something different about the images output from X4 and those output from PSP8. Image info doesn't show anything suspect.
View 3 Replies View Related