I have changed Canvas size a thousand times in my life and this has never happened before.
I have an image that is 1600 px wide and I want to trim the sides to 1260. When I start to even type in the smaller size, the file size indicated is larger (that was my first suspicion that something was not right). And sure enough, it is making the image larger?
so i downloaded the copasetic font and am trying to use it in a picture, and i can get a text box to appear and i can write the words i want, but i cant change the size to anything smaller or larger than what it starts out at. ive tried changing the size before i start typing, and its the same thing.
View 2 Replies View RelatedI'm working on a flyer on a 8x11 canvas, but I want all of the elements I'm working to be transferred to a NTSC video film format. I understand how to a open a NTSC (Video Film Canvas), but I do not understand how to convert a canvas that I'm working to that.
View 1 Replies View RelatedI use ctrl+ the number pad to change the point size of fonts. I just got thinking, it would be nice to use the same commands for making the current selection larger or smaller too. Maybe 2 and 8 would be down and up by 1 percent of current size and 4-6 could be 1% of original size. 5 would be 'return to 100% of original size.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I've recently started using Paint.NET and I've been very impressed with its features. I've run into some problems working with large images though. URL...
It's a 10000 x 11299 pixel PNG image. I want to be able to zoom in quite far in order to look at some of the fine details, and make some notes on the image while I go. Unfortunately, as I read elsewhere on this forum, it seems that Paint.NET currently doesn't support a virtual canvas size greater than 32768 x 32768. On this image, that means I get a maximum zoom of 290% before I can't zoom in anymore, which isn't very much. Right now I'm having to use the "Windows Photo Viewer" to actually view and zoom into the image, while making the notes zoomed further out in Paint.NET, which is a bit cumbersome.
I know this is probably non-trivial to fix, but it would be fantastic if you can remove this barrier on the maximum virtual canvas size.
I'm trying out X4, and I don't know if I'm doing something wrong, but it seems like the canvas size on X4 at any resolution is much smaller than in X3, e.g., at 200 pixels/inch, X4 allows 50"x50", while X3 allows 164x164". Similarly at 150 pixels/inch, X3 allows 218", while X4 allows approximately 67". Given the fact that X4 is supposed to provide access to more memory, and uses a scratch pad, this does not make sense to me-
View 4 Replies View RelatedIt's a bit hard for me to word, but when I change my canvas size I want my adjustment layers to have black additional canvas added instead of white.
View 2 Replies View Relatedhave a photo that was taken by a photographer so it is very large. I want it as a Facebook Cover for my business page but when i try to make it fit the required height and width is is either to small or if i change the image size or canvas size it doesn't look right...
View 3 Replies View RelatedI am in the process of completing my Photographic website and need to make thumbnail and larger sizes for the the site. The site will have approximately 100 images on it. Clicking the thumbnails will connect to the larger images. How do I make both sizes in PS CS? Perhaps their is a generator that you would recommend for Mac 10.2?
View 3 Replies View RelatedI have bunch of images (starting usually from 50 to 300MB with layers)
I'm flattening and making sure 8 bit. Most are ending up about 48MB. but some are ending up 80 MB and others 15 MB. what determines these oddballs being so large or small after being flattened?
I have a jpg file from which I need to crop a 128x128 section and create a bmp file from it.
I've cropped the image and copied it into a new file. But when I go to save it (as .xcf), I see my smaller image but it is centered within a gray border that is the size of my original image. I want just the 128x128 part and nothing extra.
I've attached a screen shot to show what I am dealing with.
Screen Shot 2013-10-21 at 10.31.13 PM.png (32.41K)
Number of downloads: 6
It doesnt matter what i do. when i try to scale any object from larger to smaler, even when its on a group. it deforms the positon of the ancor points i think its a bug. because it doesnt matter what i do whit the configuration, its still bothering to the point that is really unconfortable to work.
View 2 Replies View RelatedI have a large image that I scanned in with a nikon cool scan. I'd like to make some interesting proportions by doubleing the canvas width.
In all the image is fades to the right to a light grey. I'd like to expand the canvas, and then fade that grey out over the new width of the canvas.
how to fade out to white?
I have just had a new 1TB internal hard drive installed in my PC and then the original smaller internal 500GB hard drive cloned onto it. The new 1TB is now Local Dick C and the smaller 500GB has been changed from C and is now Local Disk F. PSE11 is running from the new C and all my pictures are on both C and F but the catalogue is pointing to F. I want to delete all of the old files on F to free up space since they are all cloned to the new 1TB C, so I want the PSE11 catalogue to point only to the pictures on C. I have tried creating a new Catalogue and importing my pictures from C. The images come in and look connected to C but, when I close PSE11 and then reopen that new catalogue, the image path reads F, as does the original catalogue. So, now I have two catalogues apparently point to F but I want to: 1) have only one catalogue pointing to C; 2) the delete catalogues pointing to F; 3) then reformat F: so I have a clean 500GB old hard drive for future expansion.
View 6 Replies View RelatedI created this using Gimp 2.6 on Mac 10.5: [URL].......
When I resize this to a smaller image, the text gets all distorted: [URL]......
I have been looking around on Google, but couldn't find much.Tried scaling with all the different ways (Linear, Cubical... etc). Also tried scaling from XCF and PNG files. Nothing seem to maintain the quality of the text on the image.
I just got CS5.1 at my job. This must be a preference, but when I adjust the Canvas size, it will constrain the image, rather than cropping the canvas. The Anchor in the Canvas Size menu appears outlined (highlighted?) which indicates that this is something in preferences that I can adjust.
View 2 Replies View RelatedI have an image (1200mm x 1200mm) very sharp and crisp. (A photo that i have worked on and has lots of detail) I drag this image onto a canvas size of 150mm x150mm - and the image loses all of its sharpness. It is not apparent until i zoom in to see the detail. (PSE10) I'm sure that there is a box somewhere to tick..........but i cannot find it.
when i drag it over, it is still the large size, so i grab the grips/handles and shrink to fit, then it pixelates?
In GIMP 2.8, when I copy a large image and paste it into a small canvas, the edges of the image exceeding the canvas are lost.
In Paint.Net 3.5, when you paste a large image into a small canvas, a dialog box displays
The image being pasted is larger than the canvas size. What do you want to do?
1) Expand Canvas to fit the image being pasted.
2) Keep canvas size.
3) Cancel Paste
This would be a great default feature for GIMP.
I have trouble seeing the crosshairs on my screen.
Is there anyway for me to make them larger so i don't have to strain to see them?
How do I get my brush size to be the sam size as the cursor. [URL]...
View 6 Replies View RelatedWhen I go to create a File/New Canvas, sometimes the canvas area shrinks a lot.
Is it possible to keep the original canvas size ?
i cut out the head of a friend of mine and i want to put it over the head of someone else but the first cutout is to big and for the life of me i cant figure out how to make it smaller.
View 3 Replies View Relatedhow do I make a picture smaller w/o making the document smaller. I just have a large photo to put on a flyer so it needs to be a lot smaller than it already is... I know to go to image and resize and change the size but it always makes the document smaller.
View 1 Replies View RelatedI am using Photoshop elements 10 with windows 7 on my Toshiba laptop.
I am trying to make a slide show of photos for my brother's funeral. The photos will be shown on a screen at the church and on a TV monitor at home. I was used to Photoshop 4, but had purchased but not really used Photoshop Elements 10. I am about 1000 miles away from home so I cannot go back to try to using Photoshop 4 which is not on this laptop. I don't think I want to change (i.e. resample) the pixels, etc.
I have put into order all of the photos. However, the photos are of varying sizes. The photos taken digitally are fine. However, I have a lot of photos take a long time ago for like 3X3 or 2X3, i.e. like in the 50's - 90's, which were scanned. Then provided to me in a variety of ways. Coming to me they are small on the page. ie like in one corner. I am not trying to shrink these photos. I am trying to resize them larger. And probably get rid of most of the white background.
I want to create the effect with a photoshop tool that makes one side of a text sentence look smaller than the other, as if you were looking at your tv from a side angle and the part of the sentence closest to you looks a little bit larger than the side of the text furtherst from you.
View 2 Replies View RelatedI am a hardcore Photoshop nut lol but I have recently approached learning how to use 'AI' to create my company Logo so that It can be Vector based and therefore Re-size it according to web and print as needed.
You've properly encountered this problem lots of times and i'm properly being really silly, but I am having major problems re-sizing and it, causing pixelisation on my Image, esp when going to 'Save for web and Devices'.
I did have 'drop down shadow effects' on the Logo but I believe I have deleted all of that in Appearences, Incase it is the raster effects causing the problems... but even back at its seemingly basics, I'm still having the same problems.
I tried making the Image smaller using the 'scale' & 'transform' tool before taking it into 'Save for Web and Devices' and even on my artboard it now looks pixelated..
My Artboard size is 1200 x 1200 and in 'Save for Web and Devices' it says the Original Image size is 800 x 600 (which I believe is the size of the document I chose when starting my project)...
I tried Playing with the PPI in the 'Document Raster Effects' settings, this doesn't seem to be making a difference.. Infact I'm sure playing with all the settings has almost caused my edges already to not be as sharp in view: 100% (RGB/Overprint preview) as they once were and I don't think I have the original document to go back too, due to thinking the Logo was fine, before relizing I had a problem in resizing & saving.
I have tried all of the save options in 'Save for Web and Devices' but still the Image looks pixelized, even when ignoring previewer and going ahead to re-opening the saved Image.
I've spent hours trawling the web tirelessly without any result and after being so happy with the Logo, it would be such a shame to have to delete it and try and start all over again either in Illustrator or back in Photoshop (where I know the quality won't be as good)..
I'm sure for most of you this is a walk in the park, but for me--is there a simple way to make one character in an image larger than the rest?
View 16 Replies View RelatedIs there a way to make all the text in the palettes of illustrator larger?I know you can do it as a setting in photoshop.Is that a program feature or an OS feature?
View 1 Replies View RelatedIs there a way to make a font larger than 72pt in Illustrator CC?
View 1 Replies View RelatedMacBookPro
OSX 6.8
Photoshop 5.5
I have over 100 image files set at 1200 dpi and 44,000 dpi. How can I batch process all of them so I end up with a new set of images that are all 200 dpi?
1. How do I connect, collapse and disconnect windows (tool bar, property manager, etc.)? They get stuck together and I can't unstick them.
2. What's the difference between canvas size and image size?
3. Which tools are only for web design (i.e. tools I can ignore if I'm not doing that)?
4. What's the subselection tool do?
For Photoshop:
1.Why is the original layer always locked?
2. Whats the name of the property inspector in PS? And is it called inspector or manager in FW?
