MacBookPro
OSX 6.8
Photoshop 5.5
I have over 100 image files set at 1200 dpi and 44,000 dpi. How can I batch process all of them so I end up with a new set of images that are all 200 dpi?
When i open file with paint.net and click save sometimes it make it larger and sometimes it make it smaller. When the bith depth is selected as auto are there any chance that paint.net will loose quality ? I check that generally bith depth is not changing it is 32 bit but it is able to reduce size of image which have been yahoo smushed or pgnoutwin processed. How is this possible ?
Are there any plugin which will batch read images and save them if the new size is smaller without quality loss ?
I need to convert 1220 jpg images to black & white, a size of 36x12 mm and 240dpi.
I understand how to make an action and a droplet but the issues are;
1, How can I get Photoshop to resize the images to a width of 36 mm OR a height of 12 mm and then stretch the canvas size to the right width or height? Some images width are higher than their height (of course) and vice versa (but the converted images needs to be exactly 36x12 mm)
2, When I tried to make an action and a droplet I got dialogs all the time with questions about jpg quality or something about feather.. How can I get the droplet to just do it without asking about some of the images?
i want to ask on how to resize the images into 1200 pixels wide, how to do it?
View 3 Replies View RelatedThis is an issue for which no one in my office has any solution. We create all of our plan sets on E1 size paper. However, when we plot them for redlines we print to C-size to save paper. I know you can "publish selected layouts" to plot numerous tabs at a time. However, I am unable to figure out how to make them plot to a smaller size paper than what the page is set up for. Is there a way to plot all of the tabs at a smaller scale without plotting each tab individually?
We just recently upgraded to AutoCad 2014.
I have several Photoshop images with about 35 layers, is there a way I can automatically save each layers as a separate file?
View 3 Replies View RelatedI have changed Canvas size a thousand times in my life and this has never happened before.
I have an image that is 1600 px wide and I want to trim the sides to 1260. When I start to even type in the smaller size, the file size indicated is larger (that was my first suspicion that something was not right). And sure enough, it is making the image larger?
How can I resize a batch of files, all to same smaller file size, then export to a new folder?
View 4 Replies View RelatedTrying to change the blue color in this abstract image (see image) to a much darker green (pantone 561) Any way to do this easily? I am not coming to close to this new darker green color.
View 3 Replies View RelatedI'm getting a color shift only on small images (150x150px or smaller) when I save for web in Photoshop CC and CS6. That's very weird as it doesn't happen to images larger than 150x150px! That issue happens with images with different measurements as well (e.g. rectangle), the small looks dull and the larger display the right color.
My Color Settings are set to "Monitor Color". Under save for web I have the following options not ticked: Embed Color Profile and Convert to sRGB. (viget.com/inspire/the-mysterious-save-for-web-color-shift)
I'm running the OS X 10.8.4 on a macbook pro, I tested that on both, Safari 6.0.5 and FF.
The squares in the screenshot were saved exatly the same way. The largerer displays the right color #FFCB32, but the smaller displays the color wrong.
Why is Photoshop CC displaying images 25% smaller than my other applications? If I open a 72 ppi square pixel aspect image in Photoshop, I have to zoom to 125% for it to be the same size on screen as in my browser or any other image viewer. Photoshop reads the correct pixel sizes, but displays it smaller.
I design and build websites and have been using Photoshop for over 15 years and haven't noticed this until CC. If I save the images and build out the site, or even just drag the image into a browser and then overlay that browser window above the Photoshop window to see both images side by side, I can clearly see a 25% difference in size.
If I zoom in Photoshop to 125%, then the sizes match. So, the problem is when designing a website, everything looks smaller in photoshop. Then when I build it out, everything is way too big.
My browsers are definitely at 100% zoom and I can open the image in any other image viewer at 100% and the affect is the same. Is there a setting that can be adjusted in Photoshop to correct this?
I have bunch of images (starting usually from 50 to 300MB with layers)
I'm flattening and making sure 8 bit. Most are ending up about 48MB. but some are ending up 80 MB and others 15 MB. what determines these oddballs being so large or small after being flattened?
I am working on the logo for my company's website. Heres my prob. at 100% this image is fine, but every time I resize (smaller) I end up with pixelation / fuzz on a couple letters (Particularly the P).
This is my original, click it because otherwise the "dot" is pixelated.
This is my resize:
How can I go about sharpening up the smaller images so the text entities look as good as the big image? Is there some trick to resizing that I dont know? I feel stupid asking about this it seems like I know how already and just can't remember.
I have a design that is A3 size (i.e. 297 × 420mm) and 300dpi. I'd like to save out various versions of the image: one at full size, one at 150 dpi, one at A4 (i.e. 210 × 297mm) 150 dpi, and one at A4 72dpi. At the moment I'm doing this by saving different versions of the Photoshop PSD file and then doing a 'Save As' jpg from each of those.
What's the best way to save multiple sized versions of a design?
If I resize an image in Photoshop to be smaller and/or fewer DPI is that destructive or can I go back without loss of clarity? (I'm guessing not as the PSD file sizes are so different.)
i have multiple gang scans, some of them containing 15 images or more. they are scanned at 400dpi and are extremely large files i want to break the component images into their own unique files and save them as tiffs in exactly the same format that they are in now. i want to make sure i dont compress them or change the info in any way except for file size.
View 1 Replies View RelatedWe have Adobe Acrobat Pro which has a plugin to allow batch plotting of PDFs from multi-sheet drawings. Works awesome in Autocad 2009 and before. It DOES NOT work with Autocad 2011!
We have drawings with 70 sheets and it's nice to print the entire document to a single PDF in one step. Takes less than one minute in Acad09. Nice!
I have 200+ page drawings and need to open each dwg to erase same block and text strings. Any way to batch erase same blocks and strings in multi-pages?
View 7 Replies View RelatedEvery time I open an image in Illustrator, it is 3-times smaller than the original image started out. For example:
An image starting out with the dimensions:
Width: 5.35 inches / 1070 px / 385.2 pt
Height: 5.24 inches / 1048 px / 377.3 pt
Once it is opened up in Illustrator the dimensions are contorted to:
Width: 1.93 inches / 386 px / 139 pt
Height: 1.89 inches / 378 px / 136.1 pt
And this is just from opening the image. I have not done anything as of yet. All I have to look at is a distorted pixelated mess. Why Illustrator is doing this to my image files and how do I get it to open image files with the proper dimensions?
I am making an image smaller (from 1200 pixels wide to 700), and no matter what I try it always turns out pixelated. I hate it! I just want the size of the image to get smaller without compromising the quality of said image. Here's what I've tried:
- Saving to different formats before resizing (TIF, PNG, etc)
- Changing the X and Y resolution from 150, to 300, even 900 before resizing. It seems to have no effect.
- Changing the interpolation from cubic to the others (the others ones all look worse)
I am at a loss! I am using "image/scale image" to resize, by the way. And the original image was a 1200-wide TIF. I don't see why I'm not able to increase the number of pixels while making the image smaller to maintain the integrity of the original image.
I am using Photoshop CS3 Extended
I am familiar with batch jobs in Photoshop.
I have images that vary in pixel size and resolution.
This project is for an online gift registry. First, we are hosting the images, but they have restraints due their web/system programming. So what I was told by the company was they need the images to be 300 x 300 pixel images at 72dpi. They said they would settle for 300 width only and let me scale the proportions and not worry about the height as I want to batch the process. But they stressed 300 width and 72dpi.
What I have tried is batch resizing all of them to 300 pixel width, worked fine. Then I batched changing the resolution to 72. But it changed all the pixel dimensions to various sizes. So then I tried to batch 300 pixel width and 72 resolution at one time at it ends up the same way. So what do I need to do to get 300 x 300 pixel and 72dpi?
1)I have read plenty of PPI vs DPI. Is "resolution" in Photoshop, PPI?
2)Was what they probably meant by 72dpi actually 72ppi?
3)How do I accomplish this?
In the full version of Photoshop I can crop an image 1600 x 1200 pixels, then save for web. It’s a simple two step operation that seems impossible in Elements. First because you can’t crop by pixels, only by proportion. Then because the save-to-web feature seems to result in a massive gif file, not a small jpg.
View 2 Replies View Related"Contact page" when images get transported on to page they reduce in size.I have also tried dragging the pictures onto the page but they still reduce in size.
View 2 Replies View RelatedI have found macro's to change specific RGB values to different specific values within a Corel file. I have not been successful in finding a solution on applying the same sort of change across multiple files. i.e. All Corel files within a folder will search for specific RGB's that I`ve told it to change to other specific RGB's.
I know that Corel has a macro that accomplishes a batch process where it will convert files to different file types.
I'm getting ready to build a new PC, and I'm trying to plan out how to move my LR catalog/images.
The problem is that since I've been upgrading my current PC for years and moving user data since XP. The result is that my LR catalog expects some older images to be in c:documents and settings... XP-style, others in c:usersxxx when I moved to Vista, and others in d:usersxxx when I moved my user data to a bigger hard drive. The images are actually all in one location, and there are various OS mappings that make it all work.
I'd like to avoid all this mess with my new setup. Is there a way to essentially do "update folder location" on many folders at once? Unfortunately, they are top-level and don't have a parent folder I could do that to.
Oh yeah, using x64 Lightroom 4 on Win7.
I created a nice action to work on 2 (currently loaded) images in combination.
Now I would need support on how to apply this existing and successful action in a AUTOMATE/BATCH process on a folder full of files. So instead of just loading 1 (one) picture at a time and applying the action within a standard batch to a single picture - I would need that photoshop loads 2 (TWO) images from my source folder at the same time - applies the action-batch - and then continues to load the next 2 pictures, then the next 2 etc....
I have a set of JPG images of stock. What I want to do is to resize the original picture to 153 pixels high then place an layer on top of the resized image of a Jar with a transparent centre.
That will make it look like the stock image is inside the jar.
I've tried recording an action and doing a batch, but it didnt work.
How can I do this so that I dont have to do every image one at a a time, I must be able to automate it....
I'm running Photoshop CS3
I have some images selected in Bridge. If I use image processer it's fine, the images get processed (using my action at the bottom), and ends up in a jpeg folder within my designated folder on the desktop. Unfortunately PS is also creating a duplicate image on the desktop, which gets real cumbersome with 200 images strewn across the desktop.
If I go batch route, nothing works becuase it's stops at the ACR window as these are DNG. (whether the override save as is checked or not)
I'd like to resize all the JPG files in a folder to the same size, keeping the filenames the same. How do I do this?
View 2 Replies View RelatedIs there a tool/script that will select the HDR triplets and automatically merge them to single output HDR files?
View 1 Replies View RelatedI am familiar with running actions and running an action on a batch of images. Can someone give me an effective technique for cropping a batch of photos? I need to take a bunch of photos in vertical and horizontal orientations and crop them to a specific size and resolution to fit on a screen for a slideshow.
The problem is there is no way to ensure that the photos crop correctly (e.g. cut off faces or important parts). Is there a technique or plugin, perhaps, that could at least ensure that MOST photos don't crop incorrectly?
I shoot all my photographs at 7.1MP and would like to batch process them to a smaller size for e-mail. I have a folder with 100 7.1MP images and want to copy then resize them in a new folder keeping the image name the same. I'm hoping to resize them to 100K in size.
View 1 Replies View Related
