AutoCAD Map 3D :: Plotting Images And FDO Connected Points
May 8, 2012
I'm plotting a map that is supposed to show a background of either aerial imagery or the USGS topographic maps. I have points for wells from the state database that has a tabular join to an excel spreadsheet. The well points are color coded for samping data from the spreadsheet. I want the color-coded points with the well ID number in a plot (paper or .PDF).
The imagery/map underlay are both MapIInserted, versus FDO Raster, but I've put them into a layer in Display Manager.
What's happening is that some of the points plot & some of the labels plot, but not all. Also, some of the text for the labels is missing the front end of text and some is missing the tail end.
I've gone as far as trying to set the white background of the USGS quads "transparent" and plotting with transparency thinking that the points were "under" the images. Not the case.
I'm only getting about 40% of the points.... WHY??????? I've spent the better part of a day on this and getting extremely frustrated. I've tried turning on/off hardware acceleration. I'm working with a "non-compliant" graphics card - think this is the issue?
C3D 2011
Intel Xeon E5630@2.53Ghz
NVIDA Quadro NVS420 Dual Monitor
12GB Ram / Win7 Professional 64bit SP1
View 9 Replies
ADVERTISEMENT
Jan 17, 2013
If it is possible to download images to my hard drive so that I have connected to a WMS server to obtain? Basically I am wanting to be able to send an autocad drawing with an aerial image to someone that does not have autocad map, and wanted to know how I can download the image so that I can send it to the person with the autocad drawing so that they can see the same aerial image that i do.
View 6 Replies
View Related
Mar 4, 2011
I am plotting geographical positions as "Points" in Autocad LT 2007. Using an Excel spreadsheet, I take a Lat and Long, convert to a UTM grid, then apply a "false origin" to make the numbers more manageable. (2 or 3 digits rather than 6). Then copy and paste to Autocad and use the POINT command to plot them all at once. This works fine but what I would really like to be able to do is to copy a text label across at the same time, to label each point with a description
If not, can I assign a label to a point one by one?
View 3 Replies
View Related
Jul 17, 2013
(Again): Plotting points at stations of horizontal alignment,
I wanted to plot points at the stations of horizontal alignment to be then able to capture their XYZ and thus can be stored on the GPS devise for setting out on the field.
The points are not plotted (see the attached screenshots
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
Oct 27, 2011
I normally am a Civil 3D person. Learning something new as the company I work for has been tasked with creating some GIS maps for a client. Still have only a couple of months experience with Map 3D. The current task at hand is creating a map of our client's district boundary to replace an old exhibit hanging in client's office. I used mapiinsert to insert 64 MrSID raster images, then data connected some SDF file for the boundary, major thoroughfares, and tributaries. The overall aerial imagery, after clipping, is about 11 miles by 17.25 miles. I am planning to plot this on a 48" x 76" sheet of paper at a 1200 scale.
The problem is that I get about 1/8" of an aerial image and 75-3/4" of blank paper when I try to plot. I have tried to reduce the raster image quality and bumped up the Rasterpercent and Rasterthreshold system variables to their maximum settings with no improvement. Images show when I do a preview, but do not plot out. I also tried creating a PDF but I get the same result with a thin strip of aerial when I do that. I use Bluebeam for PDF.
Map 3D 2011
Computer:
Intel Core i7 processor
8 GB RAM
Windows 7 Professional 64-bit OS
Plotter:
HP Designjet T1100ps with optimized driver
Yes, I know the HP is only a 44" plotter, but I am plotting to fit a 36" roll so that we can view a check plot before we forward the file to our reprographics company for full size plots. I have also tried different settings on the plotter but nothing I have tried has had any impact.
View 2 Replies
View Related
Feb 3, 2012
When I insert aerial photos into Autocadd 2002 or civil 3d 2011 i cannot get the border to disappear. I want them to plot seamlessly without a border or white line between the photos.
View 3 Replies
View Related
Mar 27, 2012
I have problems printing successfully the raster embedded images within a dwg file using the xerox 6279 accxes controller plotter. I use the 6279 hpgl/2 v 15.0.5 driver but when the file is longer than 1 meter long i lose the embedded images or are misplaced anywere in the drawing. I have also the same problem using other similar files with embedded ratser images
View 1 Replies
View Related
Feb 26, 2013
I'm attempting to plot a drawing with a 3d shape and a title block around it. I would like for the occluded lines to not be drawn therefore I'm using the hidden visual style and set shade plot to hidden as well.
My problem arises from the quality of the plot to PDF versus the quality coming out of a printer. It is just a 8.5x11 page. The pdf comes out with horrible anti-aliasing and jagged lines, whereas the print is entirely smooth. Is there something simple I'm missing? It would be even better to find a way to make the plot to PDF come out in vector format! I know it is possible to show the layers and have them vectorized in a PDF... How is this done?
View 4 Replies
View Related
Nov 6, 2013
I have a requirement to find all connected entities on a given line of a plant P&ID. In other words given a certain line or reference point the requirement is to 'walk the line' and list off all entities (with certain attributes and in order) that are connected on a line.
Now not having any experience with underlying object models and API's, whether A) this is possible B) which object model to use - I'm a bit confused as to which one to use.
View 1 Replies
View Related
Dec 24, 2013
Using VB.NET
How to draw connected line arc line arc line and so on, given some points formatted in a file like this
easting northing radius
0 0
10 10 200.00
12 10 150.00
30 20 60.00
50 30 50.00
50 43 60.00
1640.42 1104.30 50.00
1770.20 1100.62 100.00
1850.00 1085.18 100.00
2002.61 1141.46
the output will be like this :
line arc line arc line arc line arc line arc line arc line arc line arc line
View 1 Replies
View Related
Jun 21, 2012
I am editing a shape file and have encountered a warning which reads "The selected acdb entities are not connected". How to check which entity this warning is trying to connect to?
View 4 Replies
View Related
Mar 18, 2011
I accessed an aerial image through data connect, adjust the the georeferencing, etc. Image comes in fine and no problems...
One day, I re-open the same file and the data-connected image is gone!
I try disconnecting and deleting the image, and then try re-connecting it but all I get is an error message "There was a problem adding data to Map."
View 5 Replies
View Related
Jun 15, 2012
(I use Macromedia Freehand MX), I just recently download the trial illustrator, and my question is to know how to open points in Illustrator images for screen printing in freehand using the Halftone in Illustrator I've tried but is not the same as the finish is different and of very poor quality here is a sample as freehand and illustrator as stated in:
Look at the difference of points:
As you can see in Illustrator can only do that from the menu: Effects / Pixelate / Color Halftone... , not sharp as seen in the picture above and therefore the image does not get to see very well, while in freehand if you can manipulate the points from large fine to a point, points also can be made round, linear or ellipse and therefore may work better for screenprints and other designs that open nesecitan points at home. What I'm interested to know if there is another way to work so that the image is sharp with the open items as well as in freehand.
View 12 Replies
View Related
Aug 6, 2012
You start drawing, drawing, drawing, use IPT's in IAM's etc...
At the end of the project there are bunch of IPT's that are not used anymore in the IAM's because of changes etc...
After a while you server or computer is full of unused and unwanted IPT's.
Is there an easy way to find IPT's that are not connected to IAM's ? So i can select them all an delete?
View 5 Replies
View Related
May 14, 2012
I'm wondering if I can move a part in iLogic or rule via X,Y,Z coords say from it's current location to 0,0,0?
I don't want to use constraints because it simply can't jump from one constraint to the next without blowing up.
View 9 Replies
View Related
Jan 5, 2012
I have a table in an Access 2010 database which has 130 rows of records. Each row is assigned a drawing file name field and then the 6 attributes for the title block of each drawing. I am wanting a routine that will open a set of drawings, the set matching each drawing file name field record and populate the attributes in the drawing title block with the corresponding records in that row from the database table.
I have seen where multiple blocks in one drawing can be populated with an attached database but I want to populate several drawings with a single database that has several records. One row of records for each drawing.
View 6 Replies
View Related
Nov 11, 2012
I'm working on a project that details with topo lines. I have the contours, however because I imported them as DWG's from sketchup they're a bit messy. Basically, instead of being one continuous line, their endpoints intersect and overlap, making it look very messy. Is there anyway I could delete these extra lines? I tried the overkill command to no avail.
View 3 Replies
View Related
Feb 8, 2013
I had to create a boundary map and place points to all corners. How to export these newly created points back into my data collector (Ranger) and also I'm trying to figure out how to print out a points list.
I stumbled on to this thread but I guessing that it's a different CAD year because my modify tab doesn't look like this. URL.....
View 4 Replies
View Related
Mar 5, 2013
I have a large surface (over 1.5 million points and 20 000hectares)
I need to get a point file .csv from the TIN to be able to use it in another program.
-so i've extracted the points from my surface, but they are Autocad points.
-next step is to convert them to civil 3d points.
-I can not select them all when converting them or my computer crashes.
-so i select about 25 000 at a time, the converting takes roughly 10 minutes.
and i have over 1.5 million points to do.
how can i speed this up.
will more ram useful?
View 9 Replies
View Related
May 17, 2013
there is a way to convert land desktop aecc points to cogo points and use the full description?
I do not have access to the ldt files nor to the Descriprion keys file. It would be nice if there was an option to preserve full descriptions when converting (that would be just too simple).
View 0 Replies
View Related
Oct 9, 2012
I have recieved a file with many points and would like to convert them into COGO points in Civil 3D. The problem is; I would like to keep the hole ID's as I convert, I've made a few conversions and lose the hole ID every time (not showing in Name or Description). Is there a seting I am missing to keep these? My aim to to organize the COGO points in different point groups.
View 3 Replies
View Related
Oct 31, 2012
In autocad 2013 is the best way still to convert data you have connected to, for example a shape file, as feature data in order to convert that into polylines and text is the best method saving it all as a seperate drawing using the "save as autocad drawing command"? Is there way to do it individually in the current drawing so that I do not always have to be saving things out as seperate drawings and then copy and pasting them back into my working drawing?
View 5 Replies
View Related
Mar 30, 2012
how can I check whether an object has a reactor connected?
I wrote the following
(defun c:**** (/ ogg collegaReactor) (setq ogg (car (entsel))) (setq collegaReactor (vlr-object-reactor (list (vlax-ename->vla-object ogg)) "NOMEAPP" '( (:vlr-modified . testedit) (:vlr-objectClosed . endedit) ) ) ))(defun testedit (notifier-object reactor-object parameter-list / ogg collegaReactor) (alert "testedit"))(defun endedit (notifier-object reactor-object parameter-list / ogg collegaReactor) (alert "endedit"))
If I start two or three or more times the "c:****" and select the same object, when I changethe "alert" appear several times.
View 8 Replies
View Related
Dec 29, 2011
A way to change the display order of pipes connected to the structure in a structure label? (plan and profile) Say you have a 10", 6" and 12" pipe connected to a structure, modeled in that order, so label would place them 10, 6, 12. we would like the label to display the order as 6,10, then 12 without having to drag the pipes off and then having to re-input inverts.
View 6 Replies
View Related
Dec 11, 2013
I have a Shapefile layer added to the map via FDO. I joined it to a SQL Server based table via ODBC. I can see all the data (shapefile & ODBC table) correctly in the attribute table, but when comes time to "Query to Filter Data...", only fields in the Shapefile are available and displayed in the Filter dialogue. I want to be able to Filter using fields in the joined. If I export that same Shapefile to an SDF and THEN try the same join and filter, all the fields from the SDF as well as the joined ODBC table are available in the filter dialogue.
View 8 Replies
View Related
Aug 17, 2012
I have a couple points that were part of an import event (data from a previous project) which I want to assign as control points for an incoming traverse, is there any way to assign those as control points? I can't seem to find a way to do that other than perhaps re-importing the specific points as control points and overwriting the existing ones.
View 2 Replies
View Related
Apr 10, 2013
I have a project that was started by leaving all the survey data inside the "All Points" group. So, I'm concerned that when I enter my as built survey points, that even if I put them into their own group, that the original surface will still look at them and just rebuild to my asbuilt data, effectively cancel out the purpose of the asbuilt survey. Will this happen?
I want to take the original points and put them into a group of their own, but I don't know if that will affect anything or not? I have several wetlands already designed on that surface with volume calcs already done too.
What should I do?
View 9 Replies
View Related
Aug 9, 2012
what absolute points and relative points are in AutoCAD. What is the difference?
View 8 Replies
View Related
Aug 19, 2011
I am using two different types of raster ECW and MrSid. ECW file resolution goes way down when plotting. They look like blocks. MrSid files look fuzzy but alot better than ECWs. I've tried RASTERTHRESHOLD, and RASTERPERCENT. Both are set to 90. Using HP6100ps.
Images are fine when using Imageinsert.
Is there a setting i'm missing somewhere for them?
View 3 Replies
View Related
Jun 18, 2012
I have a block that I would like make dynamic. It is a fishhook arrow for a roundabout traffic sign. I would like to rotate the head to various angles, and have the body of the arrow adjust. I already have the ability to stretch the two end points in their direction, and rotate the head, but the curved part of the arrow body needs to adjust for the new head location. I tried dynamic stretch, but it would not attach to the rotate dimension. How do I get these arcs to stretch along their radii and associate the end arc points to the near end of arrow head?
I had one thought of using multipe arcs so that they would overlap more or less as rotated, but this is a pretty crude workaround.
LT, C3D 2005 - 2014
XP, Vista, 7
View 7 Replies
View Related
Nov 15, 2010
One to Five people has the same project loaded into their Project Navigator.
One of the people opens a plot sheet while using the Project Navigator.
ALL computers with that project loaded experience an Autocad 2011 Crash.
-No Error Message appears.
-Autocad shuts down completely with no warning.
-Simultaneously!
This only occurs with DWG files located under the Sheets Tab of the project navigator.
It is not Project specific. This has occured for different users in our office with different projects open. However Autocad only crashes for the users with the specific project accessing the plot sheet loaded.
We recently made the switch from 2009 to 2011. So far this is only a problem for projects where the plotsheets were created in 2009. We can't go back to 2009 to plot since the walls etc have now adapted to 2011.
View 6 Replies
View Related
