I drew a 3d shape using 3dpoly and I want to convert that drawing,which is now only a 3d sketch, into a solid.I have attached a picture of the lines sketch sulita.jpg.
View 9 Replies
How to convert 3D drawing drawn using the line in the 3D object / solid? Drawing is the image below and drawn using lines and polylines and I not use extrude options or other 3D options. [URL] .......
View 6 Replies View Relatedis there any possiblity to convert the Polylines containing object data to a 3D Solid so that the object are also copied?
View 9 Replies View RelatedI cant seem to get the clean command to do anything, it asks whether i want
[Imprint/seParate solids/Shell/cLean/Check/Undo/eXit]
so i type "L"
it says select object
i click the solid
it says [Imprint/seParate solids/Shell/cLean/Check/Undo/eXit] again...
I have a vector map of the United States that I am currently trying to shade in for the election. I would like to achieve an effect similar to that shown here with the lines going through the red and blue states - [URL] How would I go about doing that? I'm a novice at Illustrator and only know the basics of filling with solid colors. I have CS6 if that makes a difference.
View 2 Replies View RelatedI have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
How can i convert some solid bodies to a single solid.
View 8 Replies View RelatedIs there any way of dimensioning the radius of a cut out made on a 3D solid?
The cut edge is not detected as a radius even when orthographic set at 90 deg to the cutting plane. Do I have to use solview/soldraw etc to create 2D versions of the view to dimension?
I get the same issues when trying to dim wall thickness, overall widths of tubes etc.
I'm currently using the "Make components" feature to convert solid bodies into parts. This works great, but we use this method to construct angular roof structures, and after the parts have been made the parts have angular relationships to the .ipt files UCS co-ordinates. It would be very useful if I could align the longest edge of the part (Which is a timber truss) with the x axis in the model space and "lay" the plank flat on the X-Y plane.
View 1 Replies View RelatedHow can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
I would like to be able to export from an Inventor .dwg or .idw made up of various views (either made from an Inventor .ipt or .iam) to an AutoCAD 2000 or later .dwg, and have the objects modeled in the Inventor .ipt/.iam that is shown in these views to already be shown as blocked entities when the AutoCAD .dwg is created. Also it is important to have the scale be exactly 1:1 from the Inventor drawing to the AutoCAD drawing that is created, so that no resizing/scaling is necessary. Is it possible to create such an AutoCAD 2D drawing from any release of Inventor and if so, what are the steps/procedure for making it???
I know that the solid model of an .ipt or .iam can be made to show blocked edges that appear as a block so why not two steps further and have this capability translate through to an .ipt or .iam Inventor drawing to a save copy as AutoCAD drawing???
I'm editing someone's 2d inventor dwg, and want to show a part behind an object in the section that isn't currently showing (the part I want to show is on the model, in the appropriate level of detail referenced by the 2d view.)
I believe that the author turned the line visibility off. Is there a way to turn all line visibility back on in a 2d view?
I am looking for a way to use objects created from lines and arcs as text because of a machine that will not read text. The objects look like letters and numbers. I am wondering if there is a way to create a text style, library or whatever with the created "text". There can be hundreds of characters on a single drawing so importing and aligning and placing each object 1 at a time is very slow and painstaking.
View 9 Replies View RelatedI need to crop image in autocad, path for croping is made of lines and arcs and one picture needs to be croped with circle. Is it possible to crop this way?
View 4 Replies View RelatedI have this chair in 3d but it consists of 3d faces and i can not convert all of them into surfaces or solids...only the faces that are on the same plane can be converted. Since the object is a little curved...i get the message"faces are not coplanar"...or something.
View 9 Replies View RelatedI have some objects in AutoCAD Architecture that I need to convert from polymesh to solid. How to do this? I also have Revit Architecture if I can do it in there..
The objects are 3D light fixtures on a 2D floorplan. Can I export the whole drawing as one to convert it?
I have some objects in AutoCAD Architecture that I need to convert from polymesh to solid. I also have Revit Architecture if I can do it in there..
The objects are 3D light fixtures on a 2D floorplan. Can I export the whole drawing as one to convert it?
Is it possible to convert surface into solid in AutoCAD 2002?
For example, can I convert these five surfaces into a solid pyramid?
If yes, what is the step to do it?
I am really new to illustrator and I need to know the answer to this question fast. If I made a weird shape with 5 different lines how would I fill it in? Nothing really happens when I select the lines and then select a color.
View 5 Replies View RelatedThen I need to extrude it, but when I extrude, it's shallow. So this 2D polygon need to have face. I've tried 3DFACE but then I need to add faces manually. Is there any way to just specify this polygon and have it faced?
View 9 Replies View RelatedIs there any way to convert a surface to solid?
View 4 Replies View RelatedSupposedly there's a way "To Convert One or More Surfaces to Solids":
[URL]
However, I'm unable to find Home tabSolid Editing panelThicken.
I'm trying to take LIDAR/Point Cloud data and 3D print it (in the end, I need to make an STL file). I've created a 3D surface from Point Cloud data which results in a Raster Layer. I do not know how to convert the surface that's in the Raster Layer into a solid.
i have recived an igs fle which i imported into auticad 2012.when imported the and saved as an .dwg the model is in surfaces, im looking to convert the surface to solid so i can export the file as an .stl for 3d printing. is it possible to convert this?
View 7 Replies View RelatedI want to convert a complex object into solid, so that I can measure its volume.
View 9 Replies View RelatedI'm creating an iPhone 4 case so it has a logo on it for my teacher. I got the case from thiniverse. It was a polyface mesh. i tried to subtract from it but it didn't work. I tried convtosolid but it didnt work. I exploded them and selected the outside shell and extruded all of the objects inward. Then when i tried to union them together, some of them would union, but not all of them together. im trying to export it as a .stl so I can use it with a 3D printer...
I'm using AutoCAD 2010 Educational version.
I tried to convert the cone surface which is created by revolving line, to solid, but always fail. how to convert it? (Autocad 2013)
View 9 Replies View RelatedIs there a "simple" way to convert a 2d immage (photoshop file) to a 3d solid?
Basically I have a 2D image (a discus of sorts) that has geometrical shapes "cut out of it" (Imagine a circle with a triangle "missing" inside) and I'd like to create a evenly high discus with a triangle hole in it).. Let's say a coin that misses a triangle in it's mid.
Clearly I could draw a circle (surface) extrude it, then create a triangle (surface) and extrude that one and subtract one from the other, but since the image I have is a bit more complex I just wanted to know if there is a quicker/easier way.
Also I have a text in my discus, and drawing a text surface in AutoCAD is not really easy.
Any file I save to pdf takes any lines and makes them very small as in hairline size.
If converted to object they work fine.
How to convert 3d dwg files to solid bodies ?
View 6 Replies View RelatedI am working on a research project that requires that I scan a cast object and shell it out to a width of .125 inches. I used my school's 3D scanner to scan the cast, and I have a good model. I've made it a surface and exported it as an STP and an IGS into Inventor. I used the Sculpt feature to make it a solid object, but then I could not shell it because a few flaws in the cast made miniscule holes.
I then tried to use the scanning program's spline feature to cut the cast into splines to loft in Inventor. However, this made 5 non-connected lines at each location, so I couldn't loft. How to create a solid and then shell with either method?
I needed to prepare a Map in which certain area has to be marked out. I did with hatching spending hours on it. But i need to convert it into solid colors. Is it possible to convert them without repeating whole procedure?
[URL].......
