I have some objects in AutoCAD Architecture that I need to convert from polymesh to solid. How to do this? I also have Revit Architecture if I can do it in there..
The objects are 3D light fixtures on a 2D floorplan. Can I export the whole drawing as one to convert it?
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
I have some objects in AutoCAD Architecture that I need to convert from polymesh to solid. I also have Revit Architecture if I can do it in there..
The objects are 3D light fixtures on a 2D floorplan. Can I export the whole drawing as one to convert it?
How can i convert some solid bodies to a single solid.
View 8 Replies View RelatedHow we can convert a 3d face drawing as in attached drawing or can be using autolisp routine.
View 5 Replies View RelatedI have this chair in 3d but it consists of 3d faces and i can not convert all of them into surfaces or solids...only the faces that are on the same plane can be converted. Since the object is a little curved...i get the message"faces are not coplanar"...or something.
View 9 Replies View RelatedIs it possible to convert surface into solid in AutoCAD 2002?
For example, can I convert these five surfaces into a solid pyramid?
If yes, what is the step to do it?
Then I need to extrude it, but when I extrude, it's shallow. So this 2D polygon need to have face. I've tried 3DFACE but then I need to add faces manually. Is there any way to just specify this polygon and have it faced?
View 9 Replies View RelatedIs there any way to convert a surface to solid?
View 4 Replies View RelatedSupposedly there's a way "To Convert One or More Surfaces to Solids":
[URL]
However, I'm unable to find Home tabSolid Editing panelThicken.
I'm trying to take LIDAR/Point Cloud data and 3D print it (in the end, I need to make an STL file). I've created a 3D surface from Point Cloud data which results in a Raster Layer. I do not know how to convert the surface that's in the Raster Layer into a solid.
i have recived an igs fle which i imported into auticad 2012.when imported the and saved as an .dwg the model is in surfaces, im looking to convert the surface to solid so i can export the file as an .stl for 3d printing. is it possible to convert this?
View 7 Replies View RelatedI want to convert a complex object into solid, so that I can measure its volume.
View 9 Replies View RelatedI'm creating an iPhone 4 case so it has a logo on it for my teacher. I got the case from thiniverse. It was a polyface mesh. i tried to subtract from it but it didn't work. I tried convtosolid but it didnt work. I exploded them and selected the outside shell and extruded all of the objects inward. Then when i tried to union them together, some of them would union, but not all of them together. im trying to export it as a .stl so I can use it with a 3D printer...
I'm using AutoCAD 2010 Educational version.
I tried to convert the cone surface which is created by revolving line, to solid, but always fail. how to convert it? (Autocad 2013)
View 9 Replies View RelatedIs there a "simple" way to convert a 2d immage (photoshop file) to a 3d solid?
Basically I have a 2D image (a discus of sorts) that has geometrical shapes "cut out of it" (Imagine a circle with a triangle "missing" inside) and I'd like to create a evenly high discus with a triangle hole in it).. Let's say a coin that misses a triangle in it's mid.
Clearly I could draw a circle (surface) extrude it, then create a triangle (surface) and extrude that one and subtract one from the other, but since the image I have is a bit more complex I just wanted to know if there is a quicker/easier way.
Also I have a text in my discus, and drawing a text surface in AutoCAD is not really easy.
I have just down loaded some commercially available 3D models needed for some presentation work.
I would like to turn these into 2D orthographic views, without the polymesh, is this possible.
File formats downloaded are .fbx .lwo .max .obj .xsi
the polymesh converter in autocad did not work.
How to convert 3d dwg files to solid bodies ?
View 6 Replies View RelatedI am working on a research project that requires that I scan a cast object and shell it out to a width of .125 inches. I used my school's 3D scanner to scan the cast, and I have a good model. I've made it a surface and exported it as an STP and an IGS into Inventor. I used the Sculpt feature to make it a solid object, but then I could not shell it because a few flaws in the cast made miniscule holes.
I then tried to use the scanning program's spline feature to cut the cast into splines to loft in Inventor. However, this made 5 non-connected lines at each location, so I couldn't loft. How to create a solid and then shell with either method?
I needed to prepare a Map in which certain area has to be marked out. I did with hatching spending hours on it. But i need to convert it into solid colors. Is it possible to convert them without repeating whole procedure?
[URL].......
Is it possible to Convert a Solid Work's file to Inventor?
(I can get the file to open, but when I go to edit there is no model to see, yet there is the model in the drop down menu and get this error message.)
Autodesk Inventor Translation Report18 July 2012 (10:15)Source File:C:UsersaxcliffDesktopP01-7064.SLDPRTTranslator Type:SolidWorksSending System:SolidWorksunknownAuthor: Translation Time:00:00:01OptionsImport Type:N/AEntity Types to Import:Solids, Surfaces, WiresImport into Repair Environment:YesImport Assembly as Single Part:NoCreate Surfaces As:Single Composite FeatureImport Multiple Solid Parts as Assembly:NoUnits: Check Parts during Load:NoAuto Stitch and Promote:NoEnable Advanced Healing:N/A
Components
The following table lists the parts and assemblies created in Inventor:
+/-Name Inventor File Status
[+]
I´d like to do something like that, convert a internal volume in a solid and delete the external solid.
[URL]
I need information on how to create a 3D Solid Model from wireframe and surfaces using AutoCAD 2013.
View 7 Replies View RelatedI have a pressure vessel which I am trying to analyse. Whenever I convert the solid into 'thin bodies', it loses some of the data. For example, a fillet and a supporting ring (refer to pic attached). I haven't been able to find any 'shell element' settings to adjust.
Also, I need to manually add contacts otherwise the vessel seperates into multiple bodies.
Even though the solid model is in contact, the 'midsurface' shell seperates it. Refer to part file attached.
I briefly tried to run the analysis as a solid model, but gave up as it was taking forever just to mesh.
I have received a drawing drawn in a polyface mesh and I'm trying to convert it into a 3D shape in order to determine the volume and surface area of the shapes.
View 9 Replies View RelatedI drew a 3d shape using 3dpoly and I want to convert that drawing,which is now only a 3d sketch, into a solid.I have attached a picture of the lines sketch sulita.jpg.
View 9 Replies View RelatedHow to convert 3D drawing drawn using the line in the 3D object / solid? Drawing is the image below and drawn using lines and polylines and I not use extrude options or other 3D options. [URL] .......
View 6 Replies View Relatedis there a way to convert multiple 2d solids to hatches.
View 9 Replies View Relatedis there any possiblity to convert the Polylines containing object data to a 3D Solid so that the object are also copied?
View 9 Replies View RelatedTwo IGES parts and try to convert them to a solid. I've tried all I can think of with no good result.
I can't get them uploaded, file is too large, what can I do?
I just started with Autocad and I got a problem with creating a solid. The file is attached and as you can see I managed to make the form as a Mesh but from that point I can't convert it to a solid.
View 9 Replies View RelatedI have a set of 8 coordinates that outline a pit. I have been asked to calculate it's volume. I have input the coordinates, and have produced a 3D image of the pit. I was hoping to be able to convert the object (the pit) that I have created to a solid, so I could then determine the volume, although it is proving to be difficult.
how I could calculate the volume of this pit?