I'm trying to create a solid object that can be used for injection molding. My office has Inventor, but I'm only familiar with 3D Max. If I create the object with Nurbs in 3D Max, can I export it so that Inventor reads it as a solid object, and if so, how?
View 1 RepliesHow to create a Circular Pattern of the Solid Object by VBA. I tried it by calculation Polar Transformations but was unsuccessful.
Then Rotated the complete Solid Object which changed original location. Is there any way i can Change the Angle and Mirror instead of Making circular pattern.
how to create or edit existing .idcl mold catalogue for injection mold.
We are using 'Hales' type injection moulds and I would like to create .idcl for my library to use it with Inventor Tooling.
I need to create a triangular grid of injection boreholes with side lengths of 2m and can't think of a slick way to do it.
I've created two linear arrays of polyline at the correct spacings and MAPCLEANed to break all the crossing lines so I now have line segments at the correct locations.I now need to put a point at each vertex to show the locations of the holes.
I'm sure there must be a better way of doing this - just thinking while typing: if the two array are on different layers, I could JOIN the polys on each layer and then add POINTS at vertices??
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
Creating object in 3D solid? The circles have the same height in both edges.
View 6 Replies View RelatedBasically I have drawn some lines, arcs and splines in the 3D space, then I created surfaces between these lines, arcs and splines, thus I created an 'object' which is defined by all these surfaces.
And what I want to do now is to fill up the empty space and basically convert it into a 3D solid object.
Another example would be a loft 'object', and it creates only a surface, so may I somehow fill up the empty space and turn it into an object?
Drawing2.dwg
How to mold a pipe and flange together wit a filled in transiton as if they were one continuous piece.
The pipe edge is flush with the flat square fange. The combine option does not allow me to conduct operation.
I do have a problem on SPLIT feature. I cannot seem to apply SPLIT SOLID into an entity/object but, on the other object I am able to apply SPLIT SOLID.
Sketch created using MultiBody and would like to make use of "Make Components" to create an assembly as well as parts.
I have attach a zip file of the ipt. I am currently using Autodesk Inventor Suite 2012.
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
I do not use the sheet metal tools in IV all that often so I fully expect that I have done something completely wrong.
I have a sheet metal part that in the folded part view looks like this:
In flat pattern view (and any subsequent flat pattern drawing) it looks like this:
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
I like to create a chin from 2 ellipses profile. I used the Loft command and it does not allow me to complete the command. Did I use the right command wrongly? Or there is another way to do so?
View 4 Replies View RelatedI used surfaces to try and create a solid but it will not sculpt...new to this feature...Can it be made into a solid the surfaces or is there another far better way to create?
View 9 Replies View RelatedI try to migrate our ObjectArx Api to Inventor. Therefore I need a function to create a mesh from a solid.
With Autocad .Net Api, I can use GetObjectMesh(DbObject obj, MeshFaceterData parameter). Does in the Inventor Api a similar function exist?
In the parameters I need to set the deviation in the same way as in the Autocad .Net Api.
Example:
FaceterDevNormal = 0.1;
FaceterDevSurface = 0.1;
FaceterMeshType = 2;
I have two .dwg files that represent two different surfaces. I would like to import each .dwg file into Inventor, then create a solid with the original surfaces serving as the top and bottom. I can send the .dwg files if necessary.
View 9 Replies View Relatedi need import a dwg to inventor for create a solid.
The problem is when a import the file, in the "layers and objects import options" , inventor don't show me some layers present in the dwg.
I have just downloaded an educational version of Inventor. Although I can create sketches I cannot extrude the sketch to form a solid. The origin arrow heads appear over size and it seems as if the origin plane is being extruded to form a solid!
View 2 Replies View Relatedcreate a plane and mirror a solid?
I am planning to have the following workflow:
Plane creation:
Through the z-axis and at an angle of 7,5° to the XZ-Plane
Naming the plane - Mirror Plane
Turning off the plane visibility
Mirror solid:
Add mirrored solid to the existing solid
Here is a sample ao the code...
Dim oDoc As PartDocument
oDoc = ThisApplication.ActiveDocument
Dim oCol As ObjectCollection
oCol = ThisApplication.TransientObjects.CreateObjectCollection
'This does not work...
oCol.Add(oDoc.ComponentDefinition.SurfaceBodies(1))
'Here I want to create a new plane
Dim oPlane As WorkPlane
oPlane = oDoc.ComponentDefinition.WorkPlanes(1)
Dim oMirror As MirrorFeature
oMirror = oDoc.ComponentDefinition.Features.MirrorFeatures.Add(oCol, oPlane, False, kOptimizedCompute)
I have also attached a simplified part file where the code has been copied inti the iLogic browser
I am trying to make a chute out of 4 pieces of sheet metal. Is there a way to take a solid lofted part, shell it, and then break off each side of the the object for cutting and welding them together. I have an example attached.
View 9 Replies View RelatedI just installed Inventor 2012 two days ago and obviously no training yet. My boss asked me to do a part for GibbsCAM which includes a 7/8" left hand wire rope imprint in a block of steel for this afternoon's production. I have my block done, what is the best way to do this? I'm thinking create a wire rope solid to cut out of my block. Would I use the thread tool: that's not the same but would it work?... I don't need a representation. I need the read thing that will work!
View 2 Replies View Relatedif i draw up a 3d sold part as the finished part, can i then draw a new rectangle solid body over the top of this and split the new solid body using the part as the split tool?
the idea being that i am left with a rectangular plate with a female 3d impression of the finished part in the top.I can't seem to use the part as a split tool?
“Associative body copy API Sample” 2013 API help.
The above code in the API help shows how to do an associative or a non-associative copy in an assembly of one part into another part. ..BUT the non-associative copy does not always work correctly....
I have been testing this sample code and notice the following limitations with the lower part entitled “Create a non-associative solid base feature in the second part”...
The code uses the proxy body for the source object but it does not use the proxybody for the target object and therefore the relative positioning is wrong for the nonparametricbasefeature when it is created in the target object if the real target body is in a different place than the targetbodyproxy (e.g. it has been rotated/moved in assembly space).
I notice that if you perform this manually using the “copy object” button the relative positioning is maintained correctly even if both target and source objects have been rotated/moved in the assembly...
I'm trying to create a solid using the inside geometry of a shell in Inventor 2011. is there a simple way of doing this? i have attached the part i'm working on and need a solid that represents the free space inside the shell.
View 2 Replies View RelatedI want to create one Spur Gear in inventor with equations such that i can build more gears from this base model using excel table. For. Eg. I would like to create a gear with 40 No. of teeth of 10DP, and 20°PA, with Pitch Circle Dia, Base CIrcle Dia, Tooth Thickness based on spur gear calculations.
Now i would like to create a series of such spur gears with varying no. of teeth, i.e. 42, 44, 46, 48, 50..etc. Now if i change the No of teeth ,Accordingly the gear should modify its pitch dia, Base circle dia, Tooth Thickness which would be noted in the Equation.
how to create thes equations and use these in creating gear with different no. of teeth.
I have shown below list of gear data for various no. of gear.
I buy moldings from a couple of local vendors but they don't offer DWG's of the moldings. What is the best method for getting a molding profile (from a catalog) into AutoCAD?
View 9 Replies View RelatedHow can i join these 2 pieces of crown moldings? I've created them in polyline and then extruded them.
View 5 Replies View RelatedI'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
I want to create a mold around my object that is supposed to be a sea shell so I can cast it with a metel pewter castor machine
I have made the object but not the mold can I create a mold around the object? The result should be similar to the picture below but I don`t know how to make a mold around my object. The mold could be a double mold consisting of two pieces of.
I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
im making a cnc milling machine and need to make some things to make. This is a clamp between the magazine and the barrle of a shotgun and i made the drawing in 2d to start whit and then used the EXTRUDE to make it inn to 3d.
As you can see on the top of the object there is no surface and the same goes for the buttom. How can i make a surface?
[URL]
how to extend a solid object. You can see at the picture that I attached what I mean and also I will try to explain. I draw a fence 1.5 m high. At one specific part of the yard I want the fence to be 2.0 m high. So I moved upper part (horisontal) of the fence to the height of 2.0 m. Now I want the 2 vertical poles to "extend" to that height. Now I can delete those poles and use extend command from the bottom and then use silce command. I was just wondering if their is a command that I can use to grab the pole as it is now and pull it up to the new height if that is possible without erasing it.
View 9 Replies View RelatedI'm trying to draw a solid object. I have the top and bottom base, and all I want is to loft that thing, but when I do, it only lofts the limits - it results in a hollow object.
View 7 Replies View Related