How to mold a pipe and flange together wit a filled in transiton as if they were one continuous piece.
The pipe edge is flush with the flat square fange. The combine option does not allow me to conduct operation.
I need to do a smooth transtition between that first long cube and the cylinder kind of shpe on it's right so that the cube and cylinder are attached toether and we dont see the edges of the cube.
View 9 Replies View RelatedSee the two pipes connecting at the end on the right side see screen shot 3. How do i make so they look like that in screen shot 3
attachemnt one is the drawing atachment two is the problem that im asking
attackment three is the solution i just don't know how to make it in the actual drawing
I am struggling to create a smooth transition between radii called out on a drawing. I am also unsure of how to create a flange on that edge of my part.
Here is the drawing and the model I have created so far.
I have a rectangle to which I need to apply a gradient fill - from red to white (paper color).
While this is easy enough, I'm not really happy with the result. I expect the transition from the gradient to the actual paper color to be nearly invisible, but instead I can quite clearly see where the rectangle ends and the actual white paper begins. how to make this transition more smooth?
I am a first time Autocad user and have spent most of yesterday trying to work through this issue but am still not able to perform this. I have attached an image which on the lower part of the lines shows arcs with large radii which transition to parallel lines in the upper part of the image. Where the two meet there is an abrupt change in angle which I wish to have as a smooth transition from the gradual change in angle of the arcing lines to the parallel straight lines.
pic1.jpg
This is how the transition between the line segments should look.
I have a picture, and I want it to move smoothly from full color to full grey scale.
When I combine to pictures, I add a layer mask, and use a gradient to make the opacity move smootly from 100% to 0%
Can I use the same technique, with a gradient, to smoothly remove color from one side of a picture?
I just had my gopro take 377 pictures over a few hours (30 seconds apart) and imported them all into the timeline. What I want to do is compress all these to a time frame somewhere around 1-1:30 or so just for a short clip of clouds moving across the sky. This is easy enough to do by selecting them all and bulk changing the duration to some fraction of a second. The problem is that it was quite breezy so the movement of the tree branches from one frame to another make it more "jerky" than I want when playing back.
Is there some way to smooth this out, I was thinking a real short fade transition between each frame, but that would take a month of Sundays and I don't know if I can get the transition short enough. I tried importing with default transition to cross-fade but the transition was way too long.
I created a gradient using the gradient tool. If you look at the image I supplied, you can see a clear line between the white background and the -what is supposed to be- white bg color of the gradient. Why is this not smoother?
Using gimp 2.8 for mac.
I am trying to create a vignette on an image and find that when I use a brush with a fuzzy edge the result is not what I'm looking for. There are these circles that are left behind where there should be a smooth transition. (See Attachment)
View 8 Replies View Relatedtake a look to my Panorama, with attention to the sky. [URL]
It is made from this picture: [URL]
There is an error in the stitching because they are from different colors on the sides..
I'm trying to create a solid object that can be used for injection molding. My office has Inventor, but I'm only familiar with 3D Max. If I create the object with Nurbs in 3D Max, can I export it so that Inventor reads it as a solid object, and if so, how?
View 1 Replies View RelatedI am planning to move from a PC Windows 7-based system to a MAC. As part of this move I will need to migrate Photoshop Elements from PE 8 in Windows to PE 12 on MAC. Back in July, I previously asked what steps would be necessary to migrate to PE 11 on MAC, but I delayed making the move (waiting for the new MacBook Pro) and will now be migrating to PE 12.
Do I still follow the same steps for a (hopefully!) smooth transition of my tagged photos and catalog? i.e., migrate from PE 8 (Windows) to PE 12 (Windows). Then from PE 12 (Windows) to PE 12 (MAC). Are there any gotchas or caveats that I should be aware of? I've read a few horror stories in various places and am nervous.
Is there any way to set features to be invisible when create sketch after those 3D features so as to make the sketch more easy to see?
View 3 Replies View RelatedTrying to use the width tool, I ran into the following problem. I would like to have a smooth transition of the stroke width between two width points while keeping the original stroke width unchanged outside of that line segment.
There are four width points here: two end points and two in between. The original stroke width is 200. The two on the left have one side set to 100 while the two on the right have one side set to 50. I would like to eliminate the distortion of the line width occuring in the first and third line segments. The only solution that I have come up with so far is to place two additional width points very close to the two middle width points: one with a 100-unit side to the left of the second point in the picture and one with a 50-unit side to the right of the third point in the picture. Yet there will be a small distirtion in between.
I buy moldings from a couple of local vendors but they don't offer DWG's of the moldings. What is the best method for getting a molding profile (from a catalog) into AutoCAD?
View 9 Replies View RelatedHow can i join these 2 pieces of crown moldings? I've created them in polyline and then extruded them.
View 5 Replies View RelatedI need to miter the circled shapes in the attached image. I've been unsuccessful using booleans. The pink object in the upper left was modeled as an AutoCAD solid. I'm trying to duplicate it in Max 2009.
View 1 Replies View RelatedIs it possible to create a transition when the backplate shown in the picture is a cylinder?
I have tried several options, with 3Dpaths both nothing worked so far.
Inventor 2014 sp1 | Vault basic 2014 | HP Elitebook 8670W | win7 64b | 8Gb | GMT +1
When creating a loft between two curves, I am not able to control the top and bottom portion of the surface created, I have joined a picture of the part and my IPT file with the problem I got.
View 9 Replies View RelatedI am trying to put together a transition box assembly but I am in need of a 12N U-Joint. iPart/iAssembly of the u-joint would be even better...then I won't be back looking for the smaller u-joints I am going to need later.
View 2 Replies View RelatedI have a square to round transition that I need formed up and the shop is telling me that they would prefer to split this thing at the corners rather than the flats. I've tried two different ways of doing this but how to handle this part. It's 10.75" OD at the bottom and 2'-4" square at the top and 1'3" in length and made of 1/4" stainless steel plate. The shop wants this in four bent pieces that they can weld together down the corners.
I've tried making just the one side but I'm not getting the results I would like to see. Making the full transition (as in the picture above) gives the finished result I am looking for but I can't separate it into multiple sides.
Here I am attaching a square to round transition duct drawings which is weld assembly & assembly drawing in pdf, This one was made in Inventor from one of our principle maker, I am trying to make this similar in inventor as I couldn’t, I am pretty good in sheet metal able to make the casing well, but couldn’t the assembly of pins and making of cladding sheets on that curved surface.
Autodesk Inventor 2010.
Windows XP.
I want different features on and off with iLogic.
I have a text parameter with a choice menu of 1,2, and 3
This I want some features on and off.
If I pass the parameter I get a message: No feature found with the name. Mvg Jos
Your drawings are only as good as the symbols that complete them...
My flat pattern of a sheet metal part fails when I added strenthening Press ribs to the middle of the part using an iFeature.
I know Inventor is not capable of flattening embossed sheetmetal but is there a way to still get the flat pattern & ignore the formed areas?
Seems to me I was able to add some model features in the past like bosses, extruded holes KO's etc & I could still make a flat pattern.
I know I can use derived part to do it but that adds complications.
IV 2012 SP2
Inventor Suite 2013 Ultimate
when in simulation, if you suppress a feature is it totally taken out of the simulations workings?
I.e. if I was working on a project like some weighing scales and I had a load of objects on the scales and I then suppressed some of the objects, will the scales rise up a little to counteract the reduced weight?
I am working on a standard part that has different configurations depending on user inputs into a GUI. Once the user enters all the required parameters, the part is in its final form with all unnecessary features suppressed. I am looking for a way to automate the delete of the suppressed features using a rule and i Logic before the user saves the file.
The main reason for doing this is to reduce the file size of the part once it is saved because this same template will be used for hundreds of parts and I don't want to waste unnecessary storage space on suppressed features.
I am making a multiview drawing with isometric of a certain sheet metal part. Due to manufacturing reasons, they have to make the part longer than necessary to get a bend in it then I will have them shear off the extra. Is there a way I can show the multiview and flat pattern WITH the extra material and show the isometric WITHOUT that extra? In the model I remove the excess with a cut but I don't know how to suppress a feature for one view and not another.
View 2 Replies View RelatedI am trying to hide an extruded cut in one view of my .idw. I have tried supressing in one view but this does not work. I need to show a before and after of this cut in the same model. I can not make two models because this is a controlled document.
View 5 Replies View RelatedInventor 2010 / I'm finding myself scrolling up and down the browser bar quite a lot to get to the Solid Bodies folder for example, and I was wondering if it was possible to group features into folders or something to make the journey quicker, with the benefit of also being able to just organize things a bit better.
View 9 Replies View RelatedI am trying to make a way that suppress the flange features of all the panels that will be insert in the assembly so i can suppress all the features at ones in a assembly and don't have to do that for each panel separately.
I have a assembly with parameters and i have a part with no geometry but have linked the parameters from the assembly. In my panel part i link the parameters to the part with no geometry.
When i use the parameter in the assembly to suppress the flanges that works the way i want it. But when i insert the panel part into that assembly it doesnot work.