I have a mesh box here, and I need this mesh box had shape like the form I drew with polylines. there is a picture of it. I tryed mesh modeling,but no luck, because I need exactly the shape (of mesh box), that is drawn with polyline
View 1 RepliesI have an irregular 3D solid, a slab with an opening, and I want its coordinates. However, Autocad provides coordinates only for a simple 3D face.
I plan to use 'Xedges' to get its all edges first, and then get coordinates of these lines.
I have a set of 8 coordinates that outline a pit. I have been asked to calculate it's volume. I have input the coordinates, and have produced a 3D image of the pit. I was hoping to be able to convert the object (the pit) that I have created to a solid, so I could then determine the volume, although it is proving to be difficult.
how I could calculate the volume of this pit?
How can I create the irregular shape?
View 3 Replies View RelatedI'm creating a bin model. I've hollowed it out, the thickness of the bin tapers from top to bottom. I have selected the edges at the bottom of the bin and just want to connect these to form a solid shape which can be the base of the bin. At the moment it's hollow all the way through.
When I select these edges, then select 'border' and 'cap', nothing happens. How do I make this selection into a simple circular base?
I should design a Silicone model for a Breast Cancer Survivor. My problem is the Irregular Geometric Shape of silicone. I tried "Sphere"/ "Loft" commands,but I didn't get my desired outcome! I also drew the 2D base by "Spline"; however,"Extrusion" was not a good option to make it look like a 3D silicone!
View 9 Replies View RelatedI need to divide irregular shapes into equal parts. For example, the attached shape needs to be divided into 10 equal parts. Parametres could be set such as all dividing lines are horizontal.
I need to do this in autocad (2013) if possible.
The closest discussion I found on this was at [URL] ......
I am trying to create a 3D meshed surface from an irregular shaped solid I created using firstly a SPLINE, FILLET, PEDIT, and EXTRUDE. I have a solid in the basic shape now, but I am trying to create a meshed top and bottom (x, y, z,) to change the contours of those surfaces. I have looked at 3DMesh but it asks for (n,M,) coordinates like it is a regular shaped surface (square, rectangle) where one can calculate the required even spacing needed.
My goal is to create in CAD something like a fine art carved piece of wood, with irregular shaping and no straight planes or surfaces.
I have included a basic picture in JPEG format for your review. This is the item from which I am trying in ACAD 2010 to construct into a usable adjustable form so I may parametric for my needs.
How could make big size pipe with irregular section shape by using Civil 3D?
View 5 Replies View RelatedHow could make big size pipe with irregular section shape by using Civil 3D?
View 3 Replies View RelatedI work with maps, and i hatched a area, with a irregular shape, now i want to know this area, how can i proceed?? I already selected all area and clicked on properties to see Geometry information, acumulative... Did the List Comand.. and nothing.
View 9 Replies View RelatedI would like to create a wavy line (the zigzag feature is not exactly what I need here) to outline a shape and then fill it with a solid color.
This is approx what I want; however the undulation needs to be more round and less peaked.
I have an irregular shape (silhouette of a horse) in a darker color that I need to have cleanly bordered with 1 or 2 pixels (white).
Any hints? -I tried duplicating / desaturate / brighten / transforming the layer and ended up with (predictably) bad results.
I have trouble manually tracing around an irregular shape, such as a pitcher winding up to pitch a ball. I use the shape editor to outline the figure. When I finish I find that there's two outlines, and they're not connected. Is there some way to get them connected as one complete outline?
View 5 Replies View Relatedi already know that in order to get a gradient to follow the outline of an irregular shape you could do a "blend" with smooth colour'
T he problem I'm having is that it's an involved process and most of the time requires too much tweaking - the points in both shapes should be the same and should approximate each other's distances btw the location on both shapes. I'm wondering if there's another, more direct way to, let's say, take a letter and get a falloff gradient in the shape of the letter...
just realised that a drop shadow might work....i need the gradient to eventually become a mask...
im using XXP5, i have an irregular polygon or shape which is the space between a curved shapes outline. within this irregular shape, I want to mould the textso it is stretched / destretched to fill the space yet still be readable.
i have tried to convert the text to shapes and then adjust the nodes, but i dont get any nodes making up each letter(!) the mould tool itself doesnt seem to work. the process first involves stretching the font and rotating it to roughly fit it as close as possible.
I am looking to create an irregular concrete slab, with barrel vaulted ceilings on a small radial section of a circular slab, and a a parabolically curved upper section to the slab, and a large punched hole in the middle of the slab. To this point, I have been able to achieve this using multiple components and masses, but I was wondering if there was a way to make a single object with a single solid material that may be able to achieve the same effect. I have attached a section for ease of explanation.
View 8 Replies View RelatedI have a inuniform shape and I want to get the volume of it. How to get the volume of a solid shape?
View 1 Replies View RelatedI have some shape files that data connected to my drawings and shown as a solid color polygon. I set the foreground transparency 40% in order to see the USGS map on the background. But When I print out, it print out as a solid color, not transparency.
How to work with a solid color shape files so I can see the USGS map when it prints out.
how can I "remove" the extrusion from a 3d object?
I attached the .dwg to be more easily understood...(hopefully...)
11 MaTiuBA Bank ohne AL.dwg
So, I drew the basic shape, made an extrusion. This created the 3d solid. Now I want to make changes to the basic shape. For this I need to go back to the basic shape without the extrusion...
Lisp to draw a line along the length of a 3d solid? I have some UB (I sections) columns and beams modeled and would like to select all solids and for it draw a centerline end to end
View 7 Replies View RelatedAny routine that would allow you to cut out an odd shape from a solid with the profile of a polyline?The goal would be to have all the pieces that are left, not subtract them out..
View 3 Replies View RelatedI want to create a custom linetype that uses a solid rectangle 0.5wide and 1.0 long. Basically I want to create a shape file from an existing block I have so that I can insert it into the linetype definition. Is there an easy way to do this in ACAD 2009?
View 8 Replies View RelatedI have a curved piece of acrylic in a design that is a section of a cone with 2 holes in it (for a structure to pass through), I need to try and flatten it for CNC matching.
View 1 Replies View RelatedSince the release of Photoshop CC the "Live Shape Properties" has basically chosen when it does and does not want to show up.... sometimes I even create a new shape to replace the old one and it STILL does not show the live shape properties... how hard is it to make sure the options are available at all times? I opt for a discount since this is a half working application and the features you highlighted barely function...
View 1 Replies View RelatedI'm trying to do some pixel art, and whenever I use a tool that isn't just the pencil tool, it makes its own weird shading along my selection. Like, if I make a diagonal line with black, fills in random gray above and below the line between the two points I click. Or if I make a non filled circle, it fills in shading around the edges. All this is with one pixel thickness How do I just make it the color I've picked from the color picker without any extra color interpolations along the way?
View 2 Replies View RelatedI'm trying to create a solid black background for a logo i'm working on. From the image you can see, i'm wanting the space between the lines filled to create a solid black background behind the stripes in the logo. As well as the space between the circle and the inner line.
I've tried several options on the pathfinder panel. There's got to be an easier way than recreating the whole shape with the pen tool.
In other words, I have a green patterned background, and I want to add a transparent triangle (which should then be the green background by making it transparent) over a white layer. To sum it up, I want the triangle to be filled in with the green patterned background over the white layer. How do I do this?
View 6 Replies View Relatedi'm applying an extrude modifier to a simple spline shape, and i am accustomed to the extrude modifier generating a solid 3d object in the shape of the spline, if the spline is a closed shape.
however, in this case, the extrude modifier is generating just a 3d outline based on the spline's shape...
i can't figure out why i'm not getting a solid 3d object since the spline is closed (i checked all the vertices).
file is attached (the spline in question is named "upper side section")
daniel_k_sancturary_one07_1.zip
I am trying to make a shape made from the blob tool made into hafltones. I do not want it as a gradient, just equal sized halftones throughout the shape. Is this possible?
When I do it using Effects/pixilate/color haltone it makes multiple colored halftones, whereas I just want one color. And when I change the channel's it comes up with similar results.
As part of a larger job we have surveyed the top of a dry stone wall. The client now wants that we make a solid for him from the surveyed points with a height of 2000mm (the drawing units are in millimetres).
A 3d polyline was created from the lines joining the points and I have that in the attached drawing.
I'm not looking for someone to create the wall, but I'm looking for the method to do it, as it will certainly crop up again with this new client. I've tried many ways in both AutoCAD and Civil 3D but just can't create the solid.