One of our senior designers seems to think there is a setting when creating a sketch that will automatically dimension.
So if a straight line is draw and 5 mm length is entered a 5 mm line will immedialtey be created, he seems to think that you can then immedialtey Dimension said line??
I can't find anything, settings wise?
How do I change one of the dimensions in my sketch to be metric while maintaining the rest as a standard dimensions?
See attached pic.
I need to create skech symbols to illustrate mounting schemes, so without scale. I need to put dimensions in the symbol, which are only annotation, not parametric. This dimension must be visible once the symbol inserted on the sheet.
When I create the dimension in the sketch, it is always a paramertric dimension, which drve the drawing and is not visible in the inserted symbol.. How can I do to have only an annotation ? (I precise the option "sketch only" does not function on dimensions)
I would like to use Workplanes a little more in my model, as I am having problems with sketches failing when the model is changed slightly. I guess this comes down to the way the original parts have been modeled - dimensions for features taken off other features, which are not necessarily constant.
I have found it possible to project the workplane on the sketch, although this does not constrain the projected plane, it is free to move around.
I typically have a part file with bunch of sketch blocks as die drawings.I use those for rest of my workflow.
If I want to make drawings of these sections.
Is there a way by which I can retieve all dimensions from the sketch of the sketch blocks (die) on to a drawing.
I know that I can get model sketches but I do not know a way to get the model sketch dimensions.
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
Since day 1 when I place a dimension in sketch mode, it immediately goes to edit so I can type the number in. Suddenly yesterday it stopped editing and I have to click a few more times to type the number in. It's totally messing up my work flow and whatnot. The option in application options is checked as well.
View 4 Replies View RelatedA few times a day my sketch fonts (for dimensions) go restarted. The cure is a reboot, but it only lasts a few hours.
View 9 Replies View RelatedAll of a sudden, things in my inventor sketches are approximately double normal size - the UCS symbol, dimensions, constraint symbols. The UCS icon stays oversize regardless of the environment.
I went into Application Options, Sketch tab, and changed the Constraint and DOF symbol scale but it has no effect in the sketch environment. It's not confined to a single part or assembly and I have not, to my knowledge, changed any Windows or other Inventor setting.
I feel like I've stumbled into the Readers Digest Large Print edition of Inventor. How to control the size of these things?
(in Inventor) sometimes I am beset with a problem that I want to edit my sketch but sketch members like line(s),circle(s) are moving to dimensions which I don't want. The sketch is moving. How can I overcome this problem,
View 9 Replies View RelatedIn 5.3 I can create reference dimensions in sketch mode to my hearts content. They became very valuable as I would use them to determine placement of multiple features. Now, in IV 7, I have alot of trouble creating reference dimensions from adjacent features on the same surface. I have to change the way I'm working now and it has stumped me on a few occasions. is there a "new" feature I need to enable or is this the cost of progress?
View 9 Replies View RelatedI'm making a part and am adding features to it and using my existing sketch dimensions as my guide. The problem is that when there are sketch dimensions on the face of the part, they are difficult to read. I'm forever dragging these dims to the side in order to read them, it's just a bit annoying. I was wonering if there was a setting that made them show up as well as they do when the aren't sitting on the face of my parts. I've attached a .jpg of what I'm talking about. notice the dimension on the left side and the bottom.
View 2 Replies View RelatedSee video. What can I do about that?
View 1 Replies View RelatedI was giving a hand drawn wiring diagram (original.jpg) and it is a rats nest!!
I was asked to re-draw this and put it on our drawing template.
I have the plugs and terminal blocks drawn up and now I am about to attempt to add in the wires, but the sketch is so filled with dimension lines and values, it is going to be a task to try and make sure every line I draw is correct. This would be much easier to do if the dimensions could be turned off as the wires I am drawing will not be constrained.
I don't think there is layers options inside a sketch mode, or a if i start a new sketch I don't think I can project that sketch to the new one?
The only other options I can think of was to delete all dimensions and apply FIX constraint to everything! or
I guess I could have modeled the plugs and blocks in position and added them to the drawing, projected the geometry to a new sketch and added in my wires??
There must be someway to toggle the dimensions??
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
Unable to find a way to show dual dimensions in my model shetch.
View 8 Replies View RelatedI need converting imperial dimensions into metric in assembly as weell as part level sketches dimensions.
Any solution for converting all imperial dimensions to metric dimensions in whole assembly constraint level and as well as part level sketch dimensions. Any macros or any ilogic rules?
I have problem with creating of a Rectangle in a sketch. I would like to make a profile in assembly and then make a "revolve".
Dim oAsmDoc As AssemblyDocument
Set oAsmDoc = ThisApplication.ActiveDocument
Dim oCompDef As AssemblyComponentDefinition
Set oCompDef = oAsmDoc.ComponentDefinition
[code]..........
After I create a sketch, how do I center it about the origin? The origin is projected, I just can't figure out how to set the sketch about it.
View 4 Replies View RelatedI am trying to create a coil which from above, retains equal and thus parallel pitches whilst at the same time adheres to a semi-circular form in the cross section. You can see from the images attached that the first two revolutions are larger than the semi-circle outline.
These are the values I have used:
Cylindrical
r (t): 134.56924424045517662353735770102mm * t * 0.5
q(t): 1 deg * 360 ul * 3.0 ul * t
z(t): 10 mm * 6 ul * 0.5 ul * t * (1.5 * t) * t
tmin: 0 ul
tmax: 0.916 ul
I've got a problem with creating Path in Inventor VBA. I've created a source block definition in SourcePart.ipt, derived it in DestPart.ipt, placed this derived SketchBlockDefinition in Sketch3 and draw 3 extra lines. Now i want to add a SplitFeature with SplitTool as a Path of 3 lines, but first i need to create this Path. There is no problem with creating path from this 3 extra lines, but when i want to create path from lines that belongs to derived block - an error occurs.
Below is sample code (also included in attached file - DestPart.ipt). Try run it with DestPart.ipt as an active file. When Inventor is prompting for Selecting Sketch Entity first select one of 3 extra lines, macro ends with no errors. Then run it again, this time select one of 3 lines that belongs to SketchBlock - an error occurs.
When you try to add SplitFeature (Trim Solid) by UserInterface Button "Split" there is no problem with any set of 3 lines.
Sub CreatePathTest() Dim oPartDoc As Inventor.PartDocument Set oPartDoc = ThisApplication.ActiveDocument Dim oPickedSketchEntity As Inventor.SketchEntity Set oPickedSketchEntity = ThisApplication.CommandManager.Pick(kSketchCurveFilter, "Select Sketch Entity") Dim oNewPath As Inventor.Path Set oNewPath = oPartDoc.ComponentDefinition.Features.CreatePath(oPickedSketchEntity)End Sub
My System is Windows 7 32bit/64bit, Inventor 2012
I have a problem when I`m creating a new part in assembly.
I`m in assembly and I push a create button. Then I give it a name and OK. Then I push a plane where I want to make the part. New sketch comes but no sketch panel. I have to push right button from mouse and click finish sketch. Then when I go edit sketch the sketch panel comes like it suppose it to be.
Can we now toggle "sketch only" geometry when creating drawing view sketch transient geometry in the Inventor 2012 API?
View 2 Replies View RelatedI am trying to creating an extrusion with a sketch containing multiple circles. However, the AddForSolid() Method is not working properly, returning non-NOERROR is C++. Below is the code that I used to create a sketch(which is succeeded) and then try to create a extrusion (in my case cutting).
ApplicationPtr pInvApp;pInvApp.GetActiveObject("Inventor.Application");DocumentPtr pItem;pItem = pInvApp->GetActiveDocument();PartDocumentPtr pDoc;if(pItem->GetDocumentType() == kPartDocumentObject)pDoc = pItem;SelectSetPtr selectedItem;selectedItem = pDoc->GetSelectSet();FacePtr face;//printf("
[code]....
What I would like to do is create a custom dialogue for each of 3 or 4 standard sketch symbols we use on a regular basis. I'd like to load 'suggsted' values out of an excel spreadsheet and allow the user to pick from them or enter in a custom text string if required. The values would then become part of the sketch symbol.
I've spent some time looking into iLogic rules and I think I've determined that they're not flexible enough to do what I want.
If I'm correct, it is possible (or a good idea) to do this using a VBA macro? I'm a little hesitant to go down the full blown add-in route. While I'm pretty confident I could work it out.
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies View RelatedHow do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
want to change sketch 2013 into the sketch of 2010
View 1 Replies View RelatedWhen I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies View Relatedwhat is the difference between a sketch and a planar sketch?
View 2 Replies View Related