I notice that when I hit shift to create a straight line, it seems to be straight in about 1° increments.
Is there anywhere that I can specify the increment angle? Mostly, I make 90° straight lines, so I'd like to up this increment so that there is a more noticeable space in between the increments.
I've just recently caught up to 2.8 (From 2.4 something or other believe it or not ) and amongst a couple of things I have to say I don't like is the fact that previously when setting a path, if I wanted it to be either perfectly horizontal or vertical I could see by the steps in the path preview line whether it was or not.
With the new version, initially at least, that's no longer the case. As I tend to work with straight lines a lot of the time it's proving to be a bit of a pain. Is there any way to set the path preview line to show the steps again to indicate a straight line.
I decided to draw a long box, 2 pixels wide and fill it with the desired color. That was all fair and well until I tried reducing my image and then the nice looking spider web line that I drew turned into a horrible black and white block line that looks crap.
So, I decided to try and get rid of it, and here I am 45 minutes later still trying to get rid of it. I don't what layer it is on, there are many layers, whenever i find the layer it is and delete it it then turns up in another layer in a different color. I've tried copying and pasting over layers, it just keeps coming back, I don't know what is going on anymore, it wont go away....
How to draw a simple freaking straight line in GIMP by clicking on a point and then clicking on another point?
How do I draw a straight line in GIMP? I'm guessing all those tutorials are aimed at windows users. But I use Debian. Also tried ctrl, alt etc.
I have to wonder what kind of reasoning went into deciding not to have a line tool. It seems so simple to implement compared to all that advanced stuff. The only decent way to make a line currently that I can see is to make a square by filling a selection, shrinking, deleting, then delete all the sides of the square that i don't want. But this is so inefficient to do every time I need a line.
Is it possible to create a straight line by using coordinates instead of left clicking on a specific point(my hands are just to shaky when using a mouse to get the exact coordinate) then holding shift and then taking forever trying to get that perfect end point pixel location.
View 3 Replies View RelatedI can draw a straight line. Then I'd like to bend the line. How do I do it?
View 3 Replies View RelatedI have around 20 differently sized layers that I am trying to arrange into a straight horizontal line. I want them next to each other so that one layer's right edge is the same as the next layer's left edge. I also want them all on the bottom edge of the image. I've tried the Align tool and the Align Visible Layers option under Image, and neither have worked.
View 4 Replies View RelatedI want to move a layer or a selection in a straight line.
for example: I have a layer and only want to move it horizontally and NOT vertically.
Is it possible in GIMP? If yes, how?
Is there a trick/tip to making a straight line with Free Select Tool?
View 3 Replies View Relatedhow do one wants to do a polar increment angle to make a degree in a autocad drawing. I want to design a truss but at the angle of the truss , how to make an angle between the top chord and lower chord. which icon i should click on ?
View 3 Replies View RelatedIs there a way to make a object with straight lines to change the straight line to be undulated like a curly.
View 14 Replies View RelatedIs there a shortcut to draw a 45 or 90 degree angle from a drawn line on an angle using the pen tool? ie. Rather than just from the x and y axis.
Â
I trace a lot of maps and site plans.
Let's say I am inserting a square block into a dwg and want to get it parallel to an existing angled line. Do I have to read the angle of the line and insert the block to that angle or is there a quicker way?
View 6 Replies View RelatedIs there a way to set the Label rotation straight up instead of following the grades (at 270 ect)?
View 1 Replies View RelatedI draw a curved line and would like it to remain as a curved line even after saving the file. However everytime after saving, and opening the file again, the curve breaks into many line segments, which is not what I want! I want the curved line that I draw to remain as a curved line even after saving and opening. How do I do that? I am using autocad2010.
I use the ARC command to draw a couple of lines, they look okay here. But after I saved it, and re-open it again, what previously appeared as curved lines changed in their appearance to polyline segments.
I have the beta installed but I also installed the trial of CS6 on another computer.. Both do the exact same thing with the Adaptive Wide Angle filters. I set a line as straight, mark as vertical (2 lines really) and then process. The lines that are vertical come out wavy... best way to describe it..
Â
I add the 2 control lines to the very outside most windows where the windows meet the brick... This is a closeup of the output...  I don't know when straight lines became waveforms.. but they do with this filter!
I am working with vector art that has lines that either look like they were cut off and not finished out or extend to the edge of the page so they are straight when they should actually be curved.
Is there any way to take a straight line or part of an image and curve it with ease or will I have to redraw or alter each line?
How can I draw a straight line without that protractor shaped dotted line following my cursor making it lag and also not snap correctly to the next line? Also, I have noticed that I can't set my user interface to auto cad classic settings. There seems to be no option for it in workspace settings.
View 3 Replies View RelatedCreating sample lines at a specific increment within a range starting from the start of the range is impossible unless the start of the range is divisible by the increment. Â This is a defect that needs fixing.
Meanwhile you'll find me typing in the 93 locations for my sample lines. Â I believe this is what we made computers for.
I want to erase the watermark and x mark from a istock image for comping purposes. What is the easiest/fastest way to do this? Clone Stamp/patch tool? If stamp tool, how do you get the tool to delete the x line in a straight line. Mine always copys pixels next to it.
View 2 Replies View RelatedI have been practicing using a older book(copyright 1990) and it has some decent exercises in it. I was able to do this one but it seems I can"t find the proper way to do this..First drawing a line a certain distance..ortho on,click the first point anywhere,move curser to the left and click again. that gives me a line at 180 degrees at what ever length..Line command again starting at the second point of the first line..after clicking that point,I type in @2.38<150 that gives me a line2.38 long at 150 degrees..now how do i make a third line relative to the second line so that the angle is 75 degrees and a certain length..the picture shows what I am trying to draw..using the polar cordinates you get an angle based off the UCS( which is set at world) when you try to draw the third line ..that makes the angle between line 2 an 3 not the angle that I want..To make the drawing,I rotated the ucs -30 degrees..But there has to be a better way than that..
View 9 Replies View Relatedangle.jpg
How can I draw the bottom line, with an angle of 132 relative to the middle line?
How to draw a line that STARTS at a perpendicular angle to another line ???
View 4 Replies View RelatedIf I want North (top) to be my Zero Degrees point (rather than east - to the right) then I go into FORMAT / UNITS which takes me to DRAWING UNITS..I then have a button called DIRECTION...Here is says:
East 0
North 90
West 180
South 270
Other pick/type
Now logic tells me that currently East (to the right) is currently set to 0 degrees (which it is)And that clicking North, should then make North (up) Zero degrees.
I click North, the button shows North has been selected, but none of the values change, and East is still zero degrees.From what I found on these forums, doing this should set North to zero, but it makes no difference.
I don’t know if there is some way to draw, or somehow to say to AutoCad that it let me to input measurements from line but not from main base pint.
For example in Revit I can make angular dimension between lines and then apply any angle that I want, maybe AutoCad has such tool?
I have to draw a rather weird drawing with a lot of angled lines. Currently I'm using UCS to draw them but it's really tiresome.
I would draw 1 line, then type in UCS, select the X and Y axis, draw that line, escape, then hit in UCS again, rinse and repeat.
Is there a simpler way? I tried polar tracking "relative to last segment" but it still uses the x axis as the base, which is not what I want. I want the line to be the X axis.
how you make a straight line in Photoshop?
View 1 Replies View RelatedHow do I draw a perfectly straight line...?
View 8 Replies View RelatedIs it possible to use the eraser (or perhaps another tool) to erase in a straight line (rather than freehand)? I have an image that I need to make a series of erasures...take away straight line segments of the image. I keep finding how to "erase a straight line" on the internet but they are only discussing how to erase or clear a straight line just drawn...not what I am after. If there is a way (I was hoping I could use the eraser tool and press the shift key or something)
View 6 Replies View RelatedHow do you draw a straight line?
View 3 Replies View RelatedIf i wanted to draw a straight line with a color, much in the way you would traditionally with the edge of a rule, with the paintbrush or pencil tool, how would i do this? The pen tool creates paths. i do not want this. i just want to draw or paint a straight line.
View 4 Replies View Related