In Illustrator CS6, I would like to draw these trails for a map I'm making. Is there a way I can draw using the "Pencil" tool where when I draw, it draws a second line next to it? Is there a setting for that?
Here is an old map where you can see the double broken lines. I know how to set it so the line has gaps in it, but I need a line to be the same next to it.
I'm using the Pencil Tool to draw shapes (not good enough for the Pen Tool yet) and some of my paths are not as smooth as I'd like, so I go over them with the Smooth Tool, though it seems like it either smooths the path a little bit or completely changes its shape.
View 1 Replies View RelatedI must have pushed one or the other button but I don't know which one!
I use CS5 and have now a small arrow on my line segment tool (as shown in the picutres):
Ever since that when i click shift, it just allows me to draw vertical lines, rather than vertical or horizontal.
I need to draw a thin white line across an image, infact several lines in different places. The lines need to be permanent. I want to key in the number of pixels for the the thickness of the line and if possible key in the position of the line. I know I can use a new grid line to position a grid line, but how do I then turn that grid line into a permanent line where I can decide the width and colour? I'm trying to refrain from the long way round of zooming up to 1600% and physically using the rectangular marquee tool then filling the rectangal with colour.
View 4 Replies View RelatedIs there a way to make it so when you're drawing a line you can see how it actually will look like?
On paint it shows exactly how the line looks as ur drawing it,
but on Photoshop it shows some rectangle outline of the line.
Getting rid of pencil icon with line through it - layers are not locked
View 7 Replies View RelatedSIDE EFFECT: continued line causes first segment to disappear....
attempting to use Classroom in a Book - page 170, pencil tool "an X will appear next to pencil tool"....not so..
at one point, i DID see the "X" but can't reproduce it now that i backed up and started over. I get an asterisk,then, when drawing a line, and adding to it, the first line disappears as soon as the second line is drawn.
I don't know what I did but all of a sudden my Pencil Tool turned into an X how do I get it back lookig like a pencil?
View 4 Replies View RelatedI've been attempting to install the Adobe Suite CS3 on my Mac OS X Tiger 10.4.11. It installs fine. Any time I try and run Illustrator, it gives me an error message that says "Missing BPS Pencil Tool" and then it crashes. I have searched multiple forums, done a clean install of the OS, and even tried re-installing the software several times..
View 1 Replies View RelatedI only have one layer in the document - it is not locked. I have already tried locking it, unlocking it, creating new layers, locking/unlocking those.I am not able to access Object>Unlock All.
I have done Hide All Layers/Show All Layers - so there is nothing hidden..I have even opened a previous project, and it has the same symbol on it and none of these methods of correcting it works either. It printed fine on Friday.
When I create an entirely new document, the icon is still there.
I'm in Illustrator 5.5 and my cursor is stuck on the pencil tool. I can't change the tool with either my mouse or hot keys. I can't even select all my artwork to paste into a new file.
View 8 Replies View Related1. if i draw a line using the line tool.. can i curve it to say 40 degrees like i can with the text function?
2. So ya that one was easy.. hows bout when i want to cut something out ACCURATELY, the pen function, right? (according to a friend)when i make all those little boxes and select the area i want to cut, all that gets copied are the outer lines, which i presume is what ive just drawn.. how do i cut the area inside this?
3. and finally maybe a slightly less easy one- In Paint, when you cut out an object and paste it, you can select for the white of the image to become transparent so you can paste over what you have already.. is thee a feature in PS for this?
I want to be able to check if an object really was created with pen tool. How do I do that? Is it possible?
View 6 Replies View RelatedSince upgrading to a new iMac, I see a flickering square at the cursor, when editing a path using pencil tool and Wacom tablet. Specifically, it appears when holding "Cmd" and selecting a path or "Option" dragging along a path to simplify the path. I captured a screen video and to my surprise, the square did not appear. In it's place is either a red or black circle. I am guessing these circles are part of the AI interface that I do not see on screen. I have not found any preference or documentation about them. Review this video. You'll see the circle, but not the flickering square I see on my screen.
[URL]
AICS 5 (15.0.2)
Mac OS X 10.7.5
Wacom Intuos 5
i wish to keep using the pencil tool with a personal line stroke style (width and profile), so i can draw using the same line style, i am not able because each time I do a path i loose my style setting to the standard. Is there a way to keep the selected attributes once i do more than one path?
View 4 Replies View RelatedDraw closed paths with the Pencil toolSelect the Pencil tool.Position the tool where you want the path to begin, and start dragging to draw a path.After you’ve begun dragging, hold down Alt (Windows) or Option (Mac OS). The Pencil tool displays a small circle (and, in InDesign, a solid eraser) to indicate that you’re creating a closed path.When the path is the size and shape you want, release the mouse button (but not the Alt or Option key). After the path closes, release the Alt or Option key.You don’t have to position the cursor over the starting point of the path in order to create a closed path; if you release the mouse button in some other location, the Pencil tool will close the shape by creating the shortest possible line back to the original point.it doesn't for me. after i start drawing and i hold the option key, it goes to drawing a straight line. i don't hold the key till after i start drawing lit says.
same thing with the connect two paths. holding the command key doesn't change the behavior of the pencil tool.i'm guessing there is no way of remapping the 'smooth tool' to option again? or was it moved to another hotkey?
I've been making my drawing with the pencil tool obviously. After I make a stroke, I continue it with the last anchor point. But sometimes when I do that, the previous stroke disappears completley. Why is that?
View 3 Replies View Relatedwhen I (try to ) use Pencil and Brush tools, (cross-hatching), some lines get erased/replaced by the lines drawn close to them. It must have something to do with the preferences, but I am not sure what to change/adjust.
View 2 Replies View Relatedis it possible maybe to draw with transparent line in Shape tool?
Currently if I draw a line, make it transparent, the next line as default the same color and width, but does not inherit the transparency. That means it is not possible or just at me
I have to make a technical drawing using a handmade drawing. When I use technical drawing option, I get a technical drawing with double lines, bacause the lines of my original drawings are a little thick. How can I get a tecnical drawing with one line and not double lines?
View 8 Replies View RelatedTo turn photo To Pencil Draw we do this steps ..
Ctrl+Shift+U
Ctrl+j
Ctrl+i
M
Alt+Shift+D
Filter > Blur > Gaussian Blur> 3
Ctrl+E..
But my question is why we click litter " M " ?
And other steps ...
Did the programmers make the pen tool in CC worse or am I missing something. If I draw a path in cc and stroke it with a 2px hard brush the line is extremely jagged/rough. If I do it in CS6 that I own, the line is smooth and very fine. What gives?
View 5 Replies View RelatedI use Photoshop 7 & do a lot of cleanup of bitmap/tiff images, such a logos & symbols that need cleaning up around the edges etc. Holding the shift down while drawing with a brush in eraser, etc. mode creates a straight horizontal line & that makes cleaning a horizontal edge easy & quick.
Is there any keystroke combinations that will draw a perfectly straight vertical line?
I'm sure this is a simple thing but it's driving me crazy. Every time I draw a line it gets erased as soon as I try to draw the next one.
View 7 Replies View RelatedDoes it exist? If not, why not? I discovered it in SAI and it's amazing how easily one could draw smooth curves with the brush/pencil without a need to mess with vectors but SAI is seriously lacking in many basic things that Paint.net has (i couldn't even change the size of a cut/pasted object). It would be perfect if Paint.net had it.
View 1 Replies View RelatedI am trying to draw a straight line using the line tool, but when I hold down the shift button to draw a straight horizontal line it draws it a an angle. vertical line will go straights, but not the horizontal. I also noticed that the cursor now has an has a horizontal arrow with a vertical line at the end of it in the bottom right corner of the cursor when the line tool or shape tool is used. I went into prefrences and checked the constrain angle but it is set at 0 so I am not sure what to do or what happened. It was working fine and then all of a sudden this happened. Is there a button I may have hit that would cause this? how do I get it to draw straight lines again? I just noticed it wont draw 45 degree angles either. it sticks to angles a few degrees above and below horizontal.
View 2 Replies View RelatedIs there a somewhat easy way to draw this blue line, other than manually click on each anchor points at the top of the black lines?
View 32 Replies View RelatedI need to draw a centre line with white background on it. Now i'm doing it by pasting the main line in the background and giving it white so that it shows a white backgound. Is there a way to do just by drawing like normal lines. If we can, is it possible to control the white backgound only to show less than the original line in both ends. This is for illustrations i do for exploding views and i need to draw this line to show it as assembly drawing.
View 5 Replies View RelatedI have a curved path I imported into Illustrator, and I'd like to draw a line perpendicular to the curve at a particular point. I've searched google and this forum, but can't find any description of how to do it. Corel Draw has a button that lets you do this, so I'm hoping something similar exists in Illustrator...
i'm currently just calculating the angle at the point I want using the derivative, finding the angle, and then adding 90 degrees to it. But I need the line to be placed at a particular point, and the X/Y properties of the line are based on the ruler which isn't even in the center of the document (I want to position it relative to the artboard). As in, I just want to set the position of one endpoint of the line...
I should be able to apply an effect to a line that has been made with the line tool. Why is this not working?I thought that maybe I might have disabled Effects somehow, but I can't think of anything.
View 9 Replies View RelatedIt's me again w/the same tut at: [URL]
Where I am confused is that once the line is drawn from top to bottom and I go to draw the line across the upper area the anchors stay connected.
I tried the Alt key + click to cut the path but (as you advanced folk probably already know) it didn't work.
way to make the bottom Anchor an end Anchor? Does that even exist?
Honestly I am not even sure what I ought to be looking for in the manual etc.
I tried just drawing the shape for the Glossy effect and then filling it with the required gradient but frankly it just looks odd ... it looks flat and basically UGLY
The blue line that goes across is the problem for me.
I should also mention, if you go to the tutorial ... it says that I am suppose to Duplicate the Inner Circle but I made too many goofs and somehow all my layers ended up on one layer so rather than doing what the tut instructs I just made a New Layer and then drew a new circle with the Ellipse tool.
Even so, I actually couldn't grasp why or how I was suppose to go about intergrating the new circle with using the Pen Tool to draw the Glossy effect object. So, I skipped that part and just used the Pen tool to draw the needed shape as shown above in pink.