Illustrator :: Determine If Object Created With Pen Or Pencil Tool?
Nov 7, 2012I want to be able to check if an object really was created with pen tool. How do I do that? Is it possible?
View 6 Replies
ADVERTISEMENT
Illustrator :: X Does Not Appear With Pencil Tool
Jul 11, 2013SIDE EFFECT: continued line causes first segment to disappear....
attempting to use Classroom in a Book - page 170, pencil tool "an X will appear next to pencil tool"....not so..
at one point, i DID see the "X" but can't reproduce it now that i backed up and started over. I get an asterisk,then, when drawing a line, and adding to it, the first line disappears as soon as the second line is drawn.
Illustrator :: Pencil Tool Turned Into X
Dec 21, 2012I don't know what I did but all of a sudden my Pencil Tool turned into an X how do I get it back lookig like a pencil?
View 4 Replies View RelatedIllustrator :: Missing BPS Pencil Tool
May 21, 2013I've been attempting to install the Adobe Suite CS3 on my Mac OS X Tiger 10.4.11. It installs fine. Any time I try and run Illustrator, it gives me an error message that says "Missing BPS Pencil Tool" and then it crashes. I have searched multiple forums, done a clean install of the OS, and even tried re-installing the software several times..
View 1 Replies View RelatedIllustrator :: Cursor Stuck On Pencil Tool
Oct 13, 2013I'm in Illustrator 5.5 and my cursor is stuck on the pencil tool. I can't change the tool with either my mouse or hot keys. I can't even select all my artwork to paste into a new file.
View 8 Replies View RelatedIllustrator :: Screen Anomaly When Using Pencil Tool (AICS5)
Dec 16, 2012Since upgrading to a new iMac, I see a flickering square at the cursor, when editing a path using pencil tool and Wacom tablet. Specifically, it appears when holding "Cmd" and selecting a path or "Option" dragging along a path to simplify the path. I captured a screen video and to my surprise, the square did not appear. In it's place is either a red or black circle. I am guessing these circles are part of the AI interface that I do not see on screen. I have not found any preference or documentation about them. Review this video. You'll see the circle, but not the flickering square I see on my screen.
[URL]
AICS 5 (15.0.2)
Mac OS X 10.7.5
Wacom Intuos 5
Illustrator :: Pencil Tool Attributes Personal Style
Jun 25, 2013i wish to keep using the pencil tool with a personal line stroke style (width and profile), so i can draw using the same line style, i am not able because each time I do a path i loose my style setting to the standard. Is there a way to keep the selected attributes once i do more than one path?
View 4 Replies View RelatedIllustrator :: Draw Double Line With One Pass Of Pencil Tool?
Jul 7, 2012In Illustrator CS6, I would like to draw these trails for a map I'm making. Is there a way I can draw using the "Pencil" tool where when I draw, it draws a second line next to it? Is there a setting for that?
Here is an old map where you can see the double broken lines. I know how to set it so the line has gaps in it, but I need a line to be the same next to it.
Illustrator :: Pencil Tool In 17.1 - Closed Path Doesn't Work
Jan 31, 2014Draw closed paths with the Pencil toolSelect the Pencil tool.Position the tool where you want the path to begin, and start dragging to draw a path.After you’ve begun dragging, hold down Alt (Windows) or Option (Mac OS). The Pencil tool displays a small circle (and, in InDesign, a solid eraser) to indicate that you’re creating a closed path.When the path is the size and shape you want, release the mouse button (but not the Alt or Option key). After the path closes, release the Alt or Option key.You don’t have to position the cursor over the starting point of the path in order to create a closed path; if you release the mouse button in some other location, the Pencil tool will close the shape by creating the shortest possible line back to the original point.it doesn't for me. after i start drawing and i hold the option key, it goes to drawing a straight line. i don't hold the key till after i start drawing lit says.
same thing with the connect two paths. holding the command key doesn't change the behavior of the pencil tool.i'm guessing there is no way of remapping the 'smooth tool' to option again? or was it moved to another hotkey?
Illustrator :: Pencil Tool To Draw Shapes - Some Paths Not Smooth
Mar 20, 2013I'm using the Pencil Tool to draw shapes (not good enough for the Pen Tool yet) and some of my paths are not as smooth as I'd like, so I go over them with the Smooth Tool, though it seems like it either smooths the path a little bit or completely changes its shape.
View 1 Replies View RelatedIllustrator :: The Pencil Tool Is Not Working Correctly - Strokes Disappears Completely
Mar 12, 2013I've been making my drawing with the pencil tool obviously. After I make a stroke, I continue it with the last anchor point. But sometimes when I do that, the previous stroke disappears completley. Why is that?
View 3 Replies View RelatedPhotoshop :: How To Determine If PNG Created Is Interlaced
May 31, 2012How can I determine if a png, created in photoshop, is interlaced?I have about 10 png files I need to check. Sure I could just re-save them for web and make them all interlaced,
but I don't want to lose image quality by going through this process again if it is unnecesary (because they are already interlaced).
AutoCAD 2010 :: How To Fill A Hollow Object Created With The Sweeping Tool
Nov 7, 2012I am trying to create a tube by sweeping a circle along a spline. I read many of the previous discussion threads on the topic but I still have some issues.
I first created my spline and transformed it in a polyline (some people recommended to do it). Then I created the circle. Finally I sweep the circle along the path.
The issues are the following:
1) when I look at the tube using the 2D wireframe mode, I can see that the primitives are not completely regular. In some points there are weird intersections and I don't know how I can fix them.
2) I hoped the tube was solid. However, when I exported (as .IGS) it and see in another program, I realized that it has only two circular caps at the extremities of the tube, but inside it is hollow.
I tried to transform it in solid or mesh or whatever, but it always gives me an error, saying that the object cannot be converted.
Illustrator :: How To Extrude Path Created With Pen Tool
Jan 14, 2013I have created a path with the pen tool (the brown part), and now I want to extrude it, but it extrudes the whole containing block (See image below)
Now I have tried everything, from grouping to compound paths etc, but nothing works.
How do I extrude my path?
Illustrator :: Created Text On Curved Path Using Pen Tool And Type On Path Tool
Feb 13, 2014I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
View 1 Replies View RelatedIllustrator :: Created Logo With Gradient Object - Transparency Becomes White On Export
Aug 21, 2013I created logo with a gradient object. The gradient is with a single color and transparency.
I can not export the logo, ( Ai, eps or pdf) in InDesign and keep the transparency of the gradient. Transparency becomes white. For the pdf, not only I do not have the transparency of the gradient, but I also have a block of white around my logo.
Photoshop :: How To Show Lines? [Line Tool - Pencil Tool]
Feb 4, 2008Is there a way to make it so when you're drawing a line you can see how it actually will look like?
On paint it shows exactly how the line looks as ur drawing it,
but on Photoshop it shows some rectangle outline of the line.
Illustrator :: How To Snap A Circle Created With Ellipse Tool To Grid
Feb 23, 2014I'm trying to snap a circle created with the Ellipse tool to the grid. However, the center of the circle won't snap to the grid, it's always the edges.
My circle is 4.7mm and my grid is 10mm with 2 subdivisions. How to get the center of a circle to snap to the grid?
Illustrator :: Jagged Curves Created With Variable Stroke Width Tool?
Jul 24, 2013In Illustrator CS6 and CC, when the stroke width tool is used on a curve, the curve is actually made up of a series of straight lines instead of smooth vector curves:
whereas in CS5 it looks perfect.These images may be too small to see the details, but the difference is there. Is there a workaround for this? Or is it recognized as a bug?
AutoCad :: Determine Layer Of Object By Pointing At It?
Apr 10, 2013I have a somewhat complex document with many layers that have similar colors. Is there some way to identify the layer of a particular element using my mouse cursor in AutoCAD WS?
View 9 Replies View RelatedPhotoshop :: 1px Pencil Tool In CS6 Is 3px?
Sep 28, 2012Working in PS CS6. I want to use the pencil tool at 1px, and I've changed my settings accordingly (even typed it in to be sure) but the minumum size it will actually go is 3px.
To be clear, the size is set to 1px, but when you zoom all the way in so that the individual pixels are visible, the pencil is a 3px x 3px square and will not go smaller.
The brush tool does not behave this way, and I would use it instead but for this project I need the square precision of the pencil. I'm working in a 72dpi RGB document. I do not have this issue in CS5.
Photoshop :: Pencil Tool
Oct 15, 2005I am painting various pixels with transparency, and I don't like that pixels previously painted become more opaque when I paint over them. I would like the opacity information to remain the same, regardless of how often I paint over an already-painted pixel.
For example, suppose I paint the color (100,100,100) on a pixel with 60% opacity. If I paint over this pixel again, it should still have 60% opacity. I don't want it "stacking".
Also, just as an off topic question, is there any reason why so many people use photoshop over paint shop? I see them both as very identical and I'm having difficulty finding differences. Paint Shop Pro X is very nice, I think CS2 and PSPX are all the same.
Photoshop :: Pencil Tool Does Not Work
Nov 2, 2012My pencil tool has randomly stopped working, everything else in that pallet works fine. But when I select pencil and try to draw or change stroke size it has no reacion. I did try uninstall and reinstall but no good?
View 7 Replies View RelatedPhotoshop :: Using Patterns In The Pencil Tool
May 25, 20051) I have a pattern that I'd like to use with the pencil tool. Is there a way to do this?
I mean something similar to painting with patterns - that is, with the paint tool, you can select "Pattern" from the Fill drop-down menu, select a pattern from the Pattern drop-down menu, and then paint that pattern into your image. Supposing you set the Brush for the pencil to be big enough, how could you do this with the pencil tool?
2) Is there a way to make a selection and paint the whole region selected with one click? That is, even if the colors and shapes are heterogenous and contrasting sharply such that the paint tool would never paint beyond the bounds of any shapes or colors.
GIMP :: The Pencil Tool Can't Be Undone Now / 2.8
Aug 23, 2012Basically, I opened 2.8 this morning and started working on something, but for some reason everything I do can be undone with ctrl+z except for the pencil tool. It doesn't even feature in the undo history, so I have to just use the eraser tool instead. Is this a bug, or is there some setting I need to play with? Because I LIKE the pencil tool :/ and I don't want to have to stop using it.
View 2 Replies View RelatedPaint.NET :: Switch Off Pencil Tool After Using It?
Nov 29, 2012How do I switch off the latest tool after using it? I used the pencil then can't cancel the thing.
View 1 Replies View RelatedPaint.NET :: How To Resize Pencil Tool
Jun 10, 2013Exactly what the title says, how do I change the Pencil tool to a desired pixel size? I've been using Paint.net for a while and I haven't noticed that the Pencil tool is fixed at 1 pixel.
Also, is there a way to dock the floating panel (Colors, Tools), maybe put them below the Menu bar and accessible via dropdown button?
Photoshop :: Clean Edges With Pencil Tool
Sep 27, 2013I am drawing with a bamboo tablet a road on a map and the edges of my stroke look bumpy, i.e. not smooth, using the pencil tool.
I have the hardness set to 0. If I hold the shift key and draw parts of the road that are straight I get a nice smooth edge but when I add in the curves I must have terrible shaky hand cos its so bumpy. Is there a smooth tool or something similar?
Paint.NET :: Straight Lines With Pencil Tool?
Sep 26, 2012I switched from MSPaint over to Paint.NET at the behest of members of my main forum, alternatehistory.com, as they find it much easier to use when editing maps.
One feature that MSPaint has that Paint.NET doesn't that would make it extremely convenient is the ability to use the pencil tool to draw short straight lines in any of the 8 main directions by holding SHIFT when drawing. While it is fairly easy to assign hotkeys on MSPaint and while Paint.NET already has them for pencil/line tools, it is often more convenient to be able to do seamlessly, especially when I'm editing many lines at once (like coasts and whanot).
I checked through the first 20 pages or so in this board and didn't find anything similar.
GIMP :: Stroke Along A Path With Pencil Tool
Feb 24, 2012The pencil tool normally doesn't do antialiasing. However, when I stroke along a path with the pencil tool, the result is antialiased anyway. How can I fix this?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Determine Type Of Object That User Selected?
Mar 1, 2012Is there a way to determine the type of ACAD object that the user selected? I need to retrieve the value from either a dimension or text. The info could be in either format so the lisp routine needs to determine what was selected so the correct vla-get command is used.
Once I determine what the object is I can use an if statement to retrieve the value.
;user selects the object
(setq dimobj (vlax-ename->vla-object(car(entsel))))
;If ACAD object is a dimension do this.
(setq dimvalue (vla-get-textoverride dimobj))
;If ACAD object is text do this.
(setq dimvalue (vla-get-textstring dimobj))