when i draw a circle in corel draw, i set the height and width dimension to equal, so it should become a circle, but it end up in the monitor screen an oval shape, also i notice the y axis and x axis in the corel draw is not equal. so i check my artcut y and x axis, is also same as corel draw. But when i cut out the shape, it cut out a circle shape. isit due to monitor or other setting.
View 12 RepliesI need to crop pictures of horses to fit within a specified oval shape and size but i dont know how to do it within the corel program, i print it out on special vinyl then cut it on my Roland GX-24 and press it on to an item of clothing and i need to get 2 horses on 1 sheel of paper.
View 8 Replies View Relatedconvert my text in round shape
View 3 Replies View RelatedI'm having trouble drawing an egg shape. I drew the oval, then converted to curves. I moved the bottom node up and that made the shape squatty, but I want to move the side nodes out symmetrically. Is there a way to do this? Is there a simpler way to make an egg shape?
View 8 Replies View RelatedI want to do is draw or make a simple heart shape and I can't figure it out.
View 4 Replies View RelatedI am trying to create a logo with an open sided globe. I need to draw a shape like a crescent moon.
Stacked two circles on top of each other with the edge showing, but can't make the part that isn't supposed to be seen transparent.
Not a graphic designer but have used CorelDraw since v.3. (I am using X4)
Every time I use the ellipse tool to draw a shape, a portion of the ellipse is missing. The missing portion is always on the lower right hand side of the ellipse. I am using CorelDraw Graphics Suite X4. I have attached a graphic showing what I mean.
View 3 Replies View Relatedi have an image on my workspace. its a rectangular image. Now, I want to crop an oval out of it. So everything else around it will dissapear. How do i do this? I was thinking the CUT tool, but that only cuts from point to point.
View 3 Replies View RelatedHere's a macro I've used for quite some time. Feel free to use or modify as needed. Install, select text and run. Hold shift and the selected text will round/curve more.
Why I created? I do a lot of graphics that need the top line of text to be curved. I can easily select the top line and press a button and the macro curves it upwards. If I need more curve I hold shift and run. If I need more or less curve still, I make the item in question, the text, larger or smaller. All done by eye and it's fast.
#If VBA7 Then Private Declare PtrSafe Function GetAsyncKeyState Lib "user32" (ByVal vKey As LongPtr) As Integer#Else Private Declare Function GetAsyncKeyState Lib "user32" (ByVal vKey As Long) As Integer#End IfPrivate Const VK_SHIFT = &H10Public Function ResetKeyStatus(Optional nada As Boolean) As Boolean
[Code] .........
I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I'm working with CorelDraw X3 and want to fill text into a round shape, while keeping it's exact outline. Hence, cutting of parts of words and letters is fine with me as long as the shape is well-defined. Unfortunately when filling paragraph text into a shape, the automatic line breaks lead to a quite irregular shape regardless of font size.
As workaround I arranged a mask in front of background and text but this requires a square paragraph text which is larger than the background. Since paragraph text obviously cannot be cropped with other objects I made the mask size bigger and filled it white. When exporting my document as image everything looks neat, but there must be a better way to do this in CorelDraw itself?
I tried converting the paragraph text into artistic text and cropping this, which works fine for a few words and a small object. But I'm talking around 1000 words here, and trying to crop this artistic text leads to very random cropping results. I guess such a large number of objects and knots is too much for CorelDraw to handle!?
I need to draw a mouse in CorelDraw. Do you have a design ready?
View 1 Replies View RelatedUsing CorelDraw X5 how do I draw a cogwheel?
View 6 Replies View Relatedi'm using corel draw x4 on windows 8. I use the Math-Type Editor in order to create complex formulas with indices, potencies, greek letters and fraction bars.
Unfortunately Corel Draw can't depict some of the symbols for example the small theta "ϑ" or the multiplication sign. Instead of writing them it creates a blank or question marks.
Is there a way to create those symbols in the Math-Type Editor?
I am trying to do a fancy rectangle box 183mm width and 91mm high, in the centre is a clock face 93mm in diameter, and i want to have a nice curve effect as i have tried t to show in the about terrible sketch, making them look like shoulders.
View 14 Replies View RelatedI used polyline to trace a tree trunk. I wanted it to be just a series of line segments which I was going to export to AutoCAD and then to Sketchup. However, each segment I drew said it was a curve. When I exported to AutoCAD it came in as a spline. If I convert that to lines, where I had maybe 10 lines there are now 100.
I also tried to 2 point line tool. I started each new line from the end of the previous. It gave me the same result.
Is there a way for me to end up with just the 10 line segments? No spline. No curve. Just 10 straight lines.
I need to draw a 3D (style) football. The white segments are hexagons and the black are pentagons as in the attached picture. Of course, these won't match up correctly whilst lying flat as a football is round. How do I create the illusion of this? And the shading etc?
View 14 Replies View RelatedI just installed cdr x5 on a tablet pc (asus slate B121) and I like it very much. But I begin to get frustrated by the Poliline tool.
Since this tool needs you to double click to end a curve I always get curves with added nodes to the ends (it's impossible to do a double-click with a pen without moving the pen between the two clicks.
The only workaround that I found is to move away the pen from the screen far enough so that you can press the space bar to end the curve without extra nodes. But this is really extra gymnastic for your arm... and quite annoying while you try to get the job done in few minutes.
So, is there a way to use the poliline tool without "putting down" the "unclicked" node while pressing the spacebar? Something similar to the freehand tool, but with the ability to draw curve-straight lines consecutively.
I have an object that I need to print . It is a cartoon man and a cartoon flag with text next to it . I have printed the whole thing without a cut and it worked fine .
But now I need to print it with the images cut out. I believe I will be able to put a contour around the font easily however the problem is putting it around the flag with man in front of it . right now it makes contours on the inside of the image. Its hard to explain ..... the flag is supposed to be white with blue and red in it . and when I printed it on a big sheet with no contour it was fine .. but now that I need to do it on its own the contour goes inside the flag because there is no rectangle shape around the flag .(no outline around flag) How do I put the rectangle around the flag as well as put a smooth contour around handyman?
I need to make a design which would have something like a page turn in the right bottom corner. It should look like this:
How to make this? Obviously I can't draw it manually. Is there a way to download this in a vector form? Or is the drawing the only way?
when making no changes to an AI CS5 file, it still asks if I want to save the changes.
steps:
-open Draw- open an AI file- make no changes- when closing Draw, it asks --> do you want to save the changes?also, when you open "fileName. ai" Draw doesn't remember the file's name
I mentioned this in passing in another thread, and apparently this works with CS2 AI files. I'm using CS5 AI files... I don't know about the other versions. obviously, the name should be shown in the titlebar
and... when the file name is really really long / complicated it's handy if Draw remembers it so I can easily make a Draw CDR copy without having to type in the exact name again. Also, I shouldn't have to type in the name when I want to export as jpg (or whatever format).
I downloaded a vector map of Germany with all the states. now I'm doing fill in each state. but some lines of states seem to be having open ends thus not making an enclosed area. is there any way i can weld the shape and make corel draw detect open ends so that it closes the shape?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I'm laying out cribbage board designs for export to .dxf. I've drawn the board holes as circles but for the dxf file what I really need is a Single Point at the center of each circle.
So, is it possible to make single points in CorelDraw X4? If so, is there a way I can put a single point in the center of 300 holes at once?
I have the list of x,y coordinates for the CIE colour spectrum. How do I import the list so as to draw the spectrum curve?? The curve is the horseshoe shaped curve shown in the figure below [not the straight lines which are colours boundaries] that contains all the spectrum colours. Seems to me I should be able to import the list somehow and CorelDraw would then produce the line.
View 10 Replies View RelatedContour on a bitmap shape.
I thought this was doable. Today I found it's not, or stopped working.
"The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it.[URL]
Here's another video that shows how to make a box around a shape.
Have fun watching me goof up my words
(Note: I notice the forum chops off the right end of the video. Maybe you can save the swf and watch on your computer)
cs_setInnerHtml('video_2ce2321c-4a45-4fd1-9837-ebe8e6def303','');
"The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it. [URL].....
I actually want to put a photo into a heart shape.
View 1 Replies View RelatedI'm trying to find the best way to fill a shape with other shapes( a with a specific size), without overlaping, like the example below.
My main concerns are the spacing between the circles, the positioning should be as paralel to the the outside shapes as possible, and the size of the circles ( or any other necessary shape).
I'm doing this by hand sometimes with 900 circles. is there a fast way to this? do you know any macro/plugin to make the task easier?
fountainfill_resize.gif
I know there is not a way to change shape of founrain fill directly. But is there any other way for make this? Attached gif video from Adobe Illustrator Gradient Tool.
I am trying to draw a needle and thread showing a curved line as the thread with parallel lines so I can show where the thread crosses over itself. This is used as a stitching diagram.
View 3 Replies View RelatedHow do I create a top view cone shape like below?
View 6 Replies View Related