I am trying to do a fancy rectangle box 183mm width and 91mm high, in the centre is a clock face 93mm in diameter, and i want to have a nice curve effect as i have tried t to show in the about terrible sketch, making them look like shoulders.
View 14 Replies
I use the default page very unusal way by keeping the width & height with max. page size. I need your favour as if i want to A4 page border i am going back again and choose a4 page and double click on the rectangle to achieve it and again i choose by max. page.
create a a4 page border, or any preferred size for executing them using shortcut while keeping my max. page size.
I am trying to do this tutorial: [URL]....... but I have a trouble at Step 3 : Creating Web Header - rather: Now go to the " Shape Tool ", double click on the bottom middle line to create a custom node / corners.
View 7 Replies View RelatedI just got CorelDRAW X5 a few days ago. Until then, I had never drawn anything on a computer..Suppose I use the rectangle tool to create a box. How can I remove one of the edges ? That is, how do you remove a line-segment from a filled-object ?
View 12 Replies View RelatedWe have problems with some fonts, they display as rectangles on screen but prints just fine. Tested on both a W7 and a XP computer with all patches/updates installed. The same fonts displays fine in other applications...
View 3 Replies View RelatedI tried to apply a transparency to a beveled rectangle and was unsuccessful to get any effect to apply. Tried to make the bevel first and then apply transparency and vice-versa, a transparent rectagle and tried to do bevel effect. Neither way would work.
Don't they play nice together, or do I have to try it in PP?
I try to control the width between the border of rectangle and the edge of the text I put inside.
Is this possible with X4 ?
I like my coreldraw x4. This sign shop actually has a copy of x5 but it was so so so so awful that we had to take it off of the computer.
I am having more and more problems opening pdf's. I end up with a rectangle with a line across the corner. I'm assuming the people sending have newer adobe than what x4 can handle? I can open the pdf;s in adobe reader but only give option to save as pdf. I just looked and it says PDF VISTA . Is there a way to save them as an older one? Kind of how corel draw can be saved as an older version?
And for some odd reason, on one of the computers (the one that has the email that these pdf's come from) doesn't show them with the pdf icon on the desktop. It has the green corel draw icon instead.
I'm having trouble drawing an egg shape. I drew the oval, then converted to curves. I moved the bottom node up and that made the shape squatty, but I want to move the side nodes out symmetrically. Is there a way to do this? Is there a simpler way to make an egg shape?
View 8 Replies View RelatedI need to draw a mouse in CorelDraw. Do you have a design ready?
View 1 Replies View RelatedUsing CorelDraw X5 how do I draw a cogwheel?
View 6 Replies View RelatedHow could I create a 'postage stamp' effect around the exterior of a rectangle -- other than typing a series of "V"'s around the perimeter?
Let not the one who says it can't be done interrupt the one who is doing it.
Vista version 6 (Build 6002: Service pack 2)CorelDraw Suit version 16.1.0.843Photopaint
I have just upgraded from X4 to X6 and found that when using the paint tool, the cursor disappears at the end of the action, and appears again when the cursor is moved again.This happens when the user interface setting is set to 'Shape cursor for brush tools".
More of a concern for me is when the Eyedropper tool is set to 'Select sample', (the one I always use), no rubber rectangle is drawn to show the area that is being sampled.That is, it is supposed to draw a dynamic rectangle in a similar way that the rectangular mask tool selects an area with a rectangle changing size with movement of the cursor.The eyedropper samples the correct pixels, but does not draw the enclosing rectangle.I have tried running it in all comparability modes except for 256 color and 640 x 480 resolution, which aren't options for me.
X4 didn't exhibit these problems so I can't understand how it can't be a bug, especially since the rectangular mask tool draws the rubber-banding rectangle without a problem. At this point would be preferring to be using X4.
I want to do is draw or make a simple heart shape and I can't figure it out.
View 4 Replies View Relatedi'm using corel draw x4 on windows 8. I use the Math-Type Editor in order to create complex formulas with indices, potencies, greek letters and fraction bars.
Unfortunately Corel Draw can't depict some of the symbols for example the small theta "ϑ" or the multiplication sign. Instead of writing them it creates a blank or question marks.
Is there a way to create those symbols in the Math-Type Editor?
I used polyline to trace a tree trunk. I wanted it to be just a series of line segments which I was going to export to AutoCAD and then to Sketchup. However, each segment I drew said it was a curve. When I exported to AutoCAD it came in as a spline. If I convert that to lines, where I had maybe 10 lines there are now 100.
I also tried to 2 point line tool. I started each new line from the end of the previous. It gave me the same result.
Is there a way for me to end up with just the 10 line segments? No spline. No curve. Just 10 straight lines.
I need to draw a 3D (style) football. The white segments are hexagons and the black are pentagons as in the attached picture. Of course, these won't match up correctly whilst lying flat as a football is round. How do I create the illusion of this? And the shading etc?
View 14 Replies View RelatedIf I covert a font or shaped image under Bitmaps=>Convert to Bitmaps, I get a white solid background. In Corel x5 this would be a clear background. Also I can no longer Cover to Bitmap a photo then open with bitmap editor to create rectangles or ovals with clear faded edges. These are items I use all the time. How do I achieve this now. Also x6 will not save in x5 version. It will warn me of potencial problems then fail.
View 4 Replies View RelatedI just installed cdr x5 on a tablet pc (asus slate B121) and I like it very much. But I begin to get frustrated by the Poliline tool.
Since this tool needs you to double click to end a curve I always get curves with added nodes to the ends (it's impossible to do a double-click with a pen without moving the pen between the two clicks.
The only workaround that I found is to move away the pen from the screen far enough so that you can press the space bar to end the curve without extra nodes. But this is really extra gymnastic for your arm... and quite annoying while you try to get the job done in few minutes.
So, is there a way to use the poliline tool without "putting down" the "unclicked" node while pressing the spacebar? Something similar to the freehand tool, but with the ability to draw curve-straight lines consecutively.
when i draw a circle in corel draw, i set the height and width dimension to equal, so it should become a circle, but it end up in the monitor screen an oval shape, also i notice the y axis and x axis in the corel draw is not equal. so i check my artcut y and x axis, is also same as corel draw. But when i cut out the shape, it cut out a circle shape. isit due to monitor or other setting.
View 12 Replies View RelatedI have an object that I need to print . It is a cartoon man and a cartoon flag with text next to it . I have printed the whole thing without a cut and it worked fine .
But now I need to print it with the images cut out. I believe I will be able to put a contour around the font easily however the problem is putting it around the flag with man in front of it . right now it makes contours on the inside of the image. Its hard to explain ..... the flag is supposed to be white with blue and red in it . and when I printed it on a big sheet with no contour it was fine .. but now that I need to do it on its own the contour goes inside the flag because there is no rectangle shape around the flag .(no outline around flag) How do I put the rectangle around the flag as well as put a smooth contour around handyman?
I am trying to create a logo with an open sided globe. I need to draw a shape like a crescent moon.
Stacked two circles on top of each other with the edge showing, but can't make the part that isn't supposed to be seen transparent.
Not a graphic designer but have used CorelDraw since v.3. (I am using X4)
I need to make a design which would have something like a page turn in the right bottom corner. It should look like this:
How to make this? Obviously I can't draw it manually. Is there a way to download this in a vector form? Or is the drawing the only way?
when making no changes to an AI CS5 file, it still asks if I want to save the changes.
steps:
-open Draw- open an AI file- make no changes- when closing Draw, it asks --> do you want to save the changes?also, when you open "fileName. ai" Draw doesn't remember the file's name
I mentioned this in passing in another thread, and apparently this works with CS2 AI files. I'm using CS5 AI files... I don't know about the other versions. obviously, the name should be shown in the titlebar
and... when the file name is really really long / complicated it's handy if Draw remembers it so I can easily make a Draw CDR copy without having to type in the exact name again. Also, I shouldn't have to type in the name when I want to export as jpg (or whatever format).
I'm laying out cribbage board designs for export to .dxf. I've drawn the board holes as circles but for the dxf file what I really need is a Single Point at the center of each circle.
So, is it possible to make single points in CorelDraw X4? If so, is there a way I can put a single point in the center of 300 holes at once?
I have the list of x,y coordinates for the CIE colour spectrum. How do I import the list so as to draw the spectrum curve?? The curve is the horseshoe shaped curve shown in the figure below [not the straight lines which are colours boundaries] that contains all the spectrum colours. Seems to me I should be able to import the list somehow and CorelDraw would then produce the line.
View 10 Replies View RelatedEvery time I use the ellipse tool to draw a shape, a portion of the ellipse is missing. The missing portion is always on the lower right hand side of the ellipse. I am using CorelDraw Graphics Suite X4. I have attached a graphic showing what I mean.
View 3 Replies View RelatedI am trying to draw a needle and thread showing a curved line as the thread with parallel lines so I can show where the thread crosses over itself. This is used as a stitching diagram.
View 3 Replies View RelatedWe need to draw/modify some CGM graphics for a customer. These CGM should include the attributes "apsid" and "apsname" for a "grobject", according to the AECMA (ASD) Specification S1000D Issue 1.9.
How can I set these attributes in Corel DESIGNER X5? I found a predefined element named "Name", but no element named "Id" under object data. Further, I found out, that when I change the name of a object through the object manager the element "Name" changes also.
We should deliver the CGM graphics as CGM GREX 2.6, so these two attributes have to be correct.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View Related
