I just got CorelDRAW X5 a few days ago. Until then, I had never drawn anything on a computer..Suppose I use the rectangle tool to create a box. How can I remove one of the edges ? That is, how do you remove a line-segment from a filled-object ?
View 12 Replies
How could I create a 'postage stamp' effect around the exterior of a rectangle -- other than typing a series of "V"'s around the perimeter?
Let not the one who says it can't be done interrupt the one who is doing it.
I use the default page very unusal way by keeping the width & height with max. page size. I need your favour as if i want to A4 page border i am going back again and choose a4 page and double click on the rectangle to achieve it and again i choose by max. page.
create a a4 page border, or any preferred size for executing them using shortcut while keeping my max. page size.
I am trying to do a fancy rectangle box 183mm width and 91mm high, in the centre is a clock face 93mm in diameter, and i want to have a nice curve effect as i have tried t to show in the about terrible sketch, making them look like shoulders.
View 14 Replies View RelatedI am trying to do this tutorial: [URL]....... but I have a trouble at Step 3 : Creating Web Header - rather: Now go to the " Shape Tool ", double click on the bottom middle line to create a custom node / corners.
View 7 Replies View RelatedWe have problems with some fonts, they display as rectangles on screen but prints just fine. Tested on both a W7 and a XP computer with all patches/updates installed. The same fonts displays fine in other applications...
View 3 Replies View RelatedI tried to apply a transparency to a beveled rectangle and was unsuccessful to get any effect to apply. Tried to make the bevel first and then apply transparency and vice-versa, a transparent rectagle and tried to do bevel effect. Neither way would work.
Don't they play nice together, or do I have to try it in PP?
I try to control the width between the border of rectangle and the edge of the text I put inside.
Is this possible with X4 ?
I like my coreldraw x4. This sign shop actually has a copy of x5 but it was so so so so awful that we had to take it off of the computer.
I am having more and more problems opening pdf's. I end up with a rectangle with a line across the corner. I'm assuming the people sending have newer adobe than what x4 can handle? I can open the pdf;s in adobe reader but only give option to save as pdf. I just looked and it says PDF VISTA . Is there a way to save them as an older one? Kind of how corel draw can be saved as an older version?
And for some odd reason, on one of the computers (the one that has the email that these pdf's come from) doesn't show them with the pdf icon on the desktop. It has the green corel draw icon instead.
Vista version 6 (Build 6002: Service pack 2)CorelDraw Suit version 16.1.0.843Photopaint
I have just upgraded from X4 to X6 and found that when using the paint tool, the cursor disappears at the end of the action, and appears again when the cursor is moved again.This happens when the user interface setting is set to 'Shape cursor for brush tools".
More of a concern for me is when the Eyedropper tool is set to 'Select sample', (the one I always use), no rubber rectangle is drawn to show the area that is being sampled.That is, it is supposed to draw a dynamic rectangle in a similar way that the rectangular mask tool selects an area with a rectangle changing size with movement of the cursor.The eyedropper samples the correct pixels, but does not draw the enclosing rectangle.I have tried running it in all comparability modes except for 256 color and 640 x 480 resolution, which aren't options for me.
X4 didn't exhibit these problems so I can't understand how it can't be a bug, especially since the rectangular mask tool draws the rubber-banding rectangle without a problem. At this point would be preferring to be using X4.
If I covert a font or shaped image under Bitmaps=>Convert to Bitmaps, I get a white solid background. In Corel x5 this would be a clear background. Also I can no longer Cover to Bitmap a photo then open with bitmap editor to create rectangles or ovals with clear faded edges. These are items I use all the time. How do I achieve this now. Also x6 will not save in x5 version. It will warn me of potencial problems then fail.
View 4 Replies View RelatedMy tool box specifically- the bar which lists commands like print or save--- is suddenly gone--- don't know how to get it back with no commands to call it up
View 3 Replies View RelatedWhen i install my Corel draw 12 from cd it crashes when i use a tool
I remember that i needed to update it but those updates are gone from the Corel .com site
Corel 10 works fine. Where I can get the updates,
My version of build is 12.0.0.458
I have been using CorelDraw X6 for a couple of days now (Trial version) on a Windows 7 v32 machine. I noticed a bug in the transformation tool (Alt F10). Every time that I input a number or value on the transformation box and then press enter on my keyboard it does not change the size of my object. The only way to make it work is inputting the value and then press the apply key (I had have no problems in the pass inputting values and then changing by pressing enter on my keyboard in CorelDraw X5 whatsoever.
View 3 Replies View Relatedwhen using contour tool (to inside of object) it defaults to the max allowed according to the setting, and grays out "number of steps", how do you change to say you want ONE contour at say .015"?...my X3 will allow this, but NOT the trial I am using of X5.
View 11 Replies View RelatedIs it possible to create my own docker in VBA? I found some examples using Visual Studio.
View 4 Replies View RelatedIs it possible to create a gradient without the one on the top. See the x on the image.
[URL].........
in coreldraw x5 create boundary is not available. do any body knows about it..
View 4 Replies View RelatedSo, I understand the Boundary feature. However, I was wondering if there is a way to have the Boundary trace the inner detail?
Example. I want to create a boundary of the doughnut hole; not the outside of the doughnut.
I'm interested in creating some variations in font sets or new font sets altogether. My fading recollection is that some of the earlier versions of DRAW may have had that option as a utility. I know that we had it here at some point, although it could possibly have been in the PageMaker package..
View 7 Replies View RelatedAt the bottom of Create a New Document is a box that says Do not show this dialog again. I checked it and now I don't know how to get it back.
View 7 Replies View RelatedI can't remember how i created an object..how can I show you the object?
View 14 Replies View Relatedcroatian chicken for forum.jpg
I need to outline this, and really don't want to have to trace the whole thing. What I have been doing with the rest of this persons design is duplicating it, getting just an outline by getting rid of whatever isn't needed. Making it a wide outline and then doing create outline to object, getting rid of extra inner lines, and then I have the outline (cut line) that I need. The computer is saying that this one is too much for it to do that.
I have to make it a tiny jpg in order to upload here. The original is made out of MANY lines, but I have a vectorized outline that fits it, but not an outline that is like 1/8 or 3/16 inches all the way around it. It is being cut out to go on vehicle doors, trailers, etc. The details are way too small to have it cut right up to it.
Just checking thru all the stuff that I never got around to using and stumbled across the Interactive Connector Tool (ICT). However, when I try to use it, I can only get one end of the connection to actually latch onto an object. To fix the other end to another object, I apparently would have to make it the active object so that I could connect to - or even see - the nodes. But when I tried selecting both objects, the 2nd (connect to) object lost focus on my selecting the node of the connect from object with the ICT. Each time I end up with a line that is fixed to a point on the background as the connect to point and the connect from object on the other end.
View 6 Replies View RelatedI'm using CD X5, (I own it, not the trial download) and the Effects/Add Perspective menu choice is greyed out. ! Not selectable. I select the photo I want to change persp but the option is not available. I did reset the interface by pressing F8 upon load and it did change to default but still no perspective option.
Win 7 home Premium 64bit
I should add that this is the Home - Student version. Should that be any different? Nothing else has been ... yet anyway!
OK Where is it? It is not in any of the tools listed, I have mine down the left side of the page. Do I need to go somewhere else and add the tool to the tool box?
View 8 Replies View RelatedThe brush tool is no longer working - when I select on any of the brush tools, spray, Art burhs, spray , line, marker etc, they will not work. When I select the drop down nothing is listed. Additionally, none of the other tools in the box, Effect Tool, Image Sprayer too ect, do not work as well. Did I select something to turn off the tool?
I've tried to uninstall and re-install and that did not work.
Turn off snap to objects.Now select a dimension tool and draw either a vertical or horizontal dimension line.Now notice the snapping to objects is re-enabled.How can I stop this from happening without having to keep turning of snapping while in dimensioning mode?This looks like a glitch in X4 because I don't see this problem in X5.
View 4 Replies View RelatedWhen I try to draw an ellipse (or circle) and drag it on to my sheet, nothing happens. All of my other shape tools work as they should. What has happened. It worked originally.
View 4 Replies View RelatedIs there anyway to change the Dimension tool pre sets?... i.e. color of line. type of arrow head, etc?
At the moment i have to change them every time i use the tool!
Level Equalization was a tool that I used constantly in PhotoPaint 8. By version 10, it had disappeared for no obvious reason. It was a really vauable tool. Fortunately, I still have PhotoPaint 8 on the system, but it tends to introduce other problems, so I rarely go back to it. It would be handy to have that tool back. X3 has something called Local Equalization and another option called Histogram Equalization, neither of which seems to do anything useful.
In fact, both Histogram Equalization and Local Equalization thoroughly screw up any image that I test on them. I don't have a clue as to why they are even there, since they absolutely don't work, whereas the original Level Equalization worked really well.
