how to create a selection set based on a specific Multileader style? I can currently creating a typedvalue array to define the filter criteria, but cannot find the DXFCODE for the Multileader style.
Ex.
TypedValue[] acTypeValAr = new TypedValue[1];
acTypeValAr.setvalue(new TypedValue(DXFCODE, "Multileader Style"),0);
I have a macro that I acquired somewhere (possibly these boards, can't remember now) for placing a parts list. I have modified it somewhat to change the location on the sheet where the list gets placed, as well as a sub that starts the autoballoon command afterward.
The macro is set up to place the parts list in the upper left corner, by adding the parts list width to the Mini Point of the border. This works perfectly well, except that we have two parts list styles, and they are differently sized.
What I would like to do is have the macro detect the parts list style, and change the offset value depending on which style it finds. I am an extreme novice with the API, who basically knows just enough to tweak sample code a bit, and have not been able to find anything close enough to use as an example.
How I should go about this, or even post some samples of something similar? Current code is shown below.
Public Sub CreatePartsList() On Error Resume Next ' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument 'Set a reference to the active sheet. Dim oSheet As Sheet Set oSheet = oDrawDoc.ActiveSheet ' Set a reference to the first drawing view on ' the sheet. This assumes the first drawing ' view on the sheet is not a draft view. Dim oDrawingView As DrawingView Set oDrawingView = [code].......
The macro does not have to set the parts list style - that is controlled by the drawing Standard. It just needs to detect what it is, and place the list accordingly.
I have created a 1/4" DIM style and everything is how I want it to look except my leader function. When I go to use the leader it is grossly out of scale ( much smaller than I want) and it uses a different text than that of what I set in the style.
View 5 Replies View RelatedI'm using multileader overall scale to define ml. types for different drawing scales. For example ml. style 1_10 uses overall scale 10 and 1_20 uses overall scale 20.
When i select the ml. and change its style from 1_10 to 1_20 it also changes the overall scale to 20 which is ok.
Thing is that if i want to change it back from 1_20 to 1_10 (or something else) it only changes the dimstyle and not the overall scale(text height).
Autocad2010 there is a blue triangle preceding layer name in property box on some layers as shown on attached image. Sometimes these layers are turned on when viewing paperspace, sometimes they do not show up.
View 3 Replies View RelatedIs there anyway to save a multileaderstyle so that I don´t have to create it every time I open a new drawing?
View 3 Replies View RelatedI use LT 2010 and have defined a multileader style which is annontative. When i use this each time i have to make he text annotative and set the height even though it uses the right annotative text style.
View 2 Replies View RelatedMultileader Style that is Annotative, and once it gets drag/dropped on a Tool Palette, the Annotative aspect of the style no longer is enabled when it's activated through the Tool Palette on a fresh drawing? I've looked through all the System Variables related to the Annotative family (that I can think of) and still I'm not seeing the results that I want.
I can insert these into our Client Specific Template for our internal stuff, but we kick off new jobs all the time by producing a quick "test fit" for our client.
These Tool Palettes are networked on an enterprise level so it would be a real bummer if we can't get it to work.
We are trying to use the "Underline top line" option located in the Content tab of the Modify MultiLeader Style dialog in AutoCAD 2012 (See attachment).
The minor issue we have is that there seems to be no way to adjust the gap between the text and the "underline". In regular dimensions, there is a dimvar called DIMGAP that controls this distance. Is there any way to control the distance between the top line MText and the "underline"?
I'm working on a command that lets me select polylines on a specific layer, then converts them to 3d solids. I'm having a slight issue where if a polyline has the same start and end coordinates (this happens in some of our drawings), then the command stops and I get an eDegenerateGeometry error. I want to modify my command so that it detects these objects, removes them from the selection set, and then notifies the users of their prescence so they can be removed manually. The last part i think I can handle, however I'm not sure how to modify either my filter or my routine to detect and ignore these objects. I'm assuming that since i'll want to record these objects to later notify the user, that i'd probably want to modify my routine.
using System;using Autodesk.AutoCAD.Runtime;using Autodesk.AutoCAD.ApplicationServices;using Autodesk.AutoCAD.DatabaseServices;using Autodesk.AutoCAD.Geometry;using Autodesk.AutoCAD.EditorInput;using Autodesk.AutoCAD.DataExtraction;using Autodesk.AutoCAD.Colors;using System.Windows.Forms;
[code]...
Is there a way to set up a custom Point Label Style that will change the text color if the information entered meets particular criteria? I will be entering sample measurements taken on two (2) different dates, but if the sample data is greater than 1.0, I want it to show up a different color.
View 4 Replies View RelatedHow do you change Mtext to A specific style so it always opens up that way.
View 2 Replies View RelatedSee attached file.
I have this special type of callout, which is not easy to draft, but it looks pretty in plans. Is there any easy way to convert this to multileader?
Usually, I create it as block, insert it and change location of solid arrow around textbox. If I want to relocate this callout, Its not that easy as like multileader. I have to move solid arrow around textframe (from one corner to other) to point the same location. can this be done automatically (like mleader?)
I have created a surface spot elevation label style. I have several surfaces. How do I associate the style with a specific surface?
View 2 Replies View Relatedis it possible to apply a specific dimension style to a layer only, without affecting the dimensions already on my drawings??
View 4 Replies View RelatedI finally paid one of those conversion companies to convert this QuarkXPress file that I was working with to InDesign, since InDesign seems like such a better program. Everything seemed to transfer over smoothly, and I have now been editing this document in InDesign. Unfortuantely, after a bunch of new edits, I realized the one thing that didn't seem to transfer over was the index. The old Quark file had an index with about 900+ entries in it. Is there any quick way to add all those entries back without having to go through the document and highlight the text manually, one by one by one? That would take forever. Pretty much everything that's gonna be indexed is after a paragraph marker of the paragraph style called "gray box."
Also, since each entry is bold, it was set up as having a paragraph style named "title." If IND could find anything with that style and add it as an entry, that may make my job way easier? Or will I be stuck selecting text over the next day and manually adding entries?
If I have a layer that is smaller than the canvas, and I want a selection that matches the contents of the layer, how do I do that? Looked at the keyboard shortcuts and faq but didn't see it.orry, I'm a programmer trying to find his way in photoshop.
View 5 Replies View RelatedI created the following user parameters:
-Thickness
-Width
-Length
-Dia
I then created a Custom iProperty which consisted of the following "formula": Finished Material Size = <Thickness> x <Width> x <Length> Lg.
eg. of Finished Material Result : Finished Material Size = 6 x 25 x 300 Lg.
The problem comes up when dealing with diametrical components as the above formula will only populate for square or rectangular parts. Which would work if I could use iLogic code to populate the Finished Material Size iProperty. I have tried but failed.
First I created another user parameter called "Geometry Type" which has a drop down selection of either "DIA" or "SQUARE, RECTANGULAR".I then created the following iLogic code to set 0 as the value for the "unused" size parameters
If PART_GEOMETRY = "DIA" Then WIDTH = "0"If PART_GEOMETRY = "DIA" Then THICKNESS = "0"If PART_GEOMETRY = "SQUARE, RECTANGULAR" Then DIA = "0"
The part I just can't get to work is as follows.
I need some iLogic code which will populate the "FINISHED MATERIAL SIZE" custom iproperty with one of the following based on my "GEOMETRY TYPE" selection. "DIA" would return the following to "FINISHED MATERIAL SIZE": = Ø <Dia> x <Length> Lg.
While "SQUARE, RECTANGULAR" would return the following to "FINISHED MATERIAL SIZE": = <THICKNESS> x <WIDTH> x <LENGTH> Lg.I tried the following code but it does not work:
If PART_GEOMETRY = "DIA" Then iProperties.Value("Custom", "FINISHED MATERIAL SIZE")= "Ø"DIA "x" LENGTH "Lg."If PART_GEOMETRY = "SQUARE, RECTANGULAR" Then iProperties.Value("Custom", "FINISHED MATERIAL SIZE")= THICKNESS "x" WIDTH "x" LENGTH "Lg."
Is there a way to make a New file based on the current selection?
View 2 Replies View RelatedI am using Maya 2012. I am doing a tutorial for Maya 2011. It is directing me to do some selecting and transformation to my mesh using camera based selection. The tutorial says:
1. double click the selection tool icon in the toolbox. the tool settings editor appears.
2. In the common selection options selection underneath marquee, turn on camera based selection.
3. Right mouse click the mesh and select vertex from the marking menu. The vertices appear on the mesh.
4. While looking at the front of the mesh, select the vertices that need to me moved by holding the left mouse button at one corner dragging a marquee selection over them. the vertices should be selected.
I selected the “turn on camera based selection” in the selection icon toolbox settings editor. But I can’t select the veritces using a left mouse click bounding box or by selecting the vertices individually. The vertices just won’t highlight or select. If I want to select I have to turn off the camera based selection.
I've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
How to do the automatic creation of 3D solids based on plans and sections element. How 3D objects are created in prosteelu.
View 9 Replies View RelatedI saw a macro that does this a while ago, but I could very well be wrong. If it doesn't already exist, I am not even sure if it is possible, so I thought I'd ask the Macro Masters here!
Lets say I have a page fill of objects/shapes/text with all sorts of different colors.
I select the black color (or whatever color) but would actually like to select ALL colors other than the black color that I have selected.
So, if I have a page with Black, Red, Green & Blue shapes, I select an object colored black, the macro would then select ALL objects/text on the page that are NOT black.
I want to create a command:
My selection set consists of dbpoints that exists on my drawing and they are more or less in line
I create a new point3dcollection with this db points
I want to create a 3d polyline based on this point3d collection
My problem is : how to sort this point3d collection based on a picked start point and picked end point?
The only idea I have is:
from start point i calculate the distance to each point3d from collection and based on the results i sort the point3d collection based on distances.
My vision is when someone inserts "block A", a promt will come up and ask "how many of "block A" do you need?" Based on how many you need, it will insert the block along with the arrayed amount the user has typed in.
View 1 Replies View RelatedI want to create a pyramid with a base of three sides with different lenght. In the end i want to have a solid where i can drag and move the notes to change the hight,lenght and the angle of the sides.
I already managed to draw it in 3d but now i want to convert the drawing into a solid and keep it flexible to change the parameters by draging the notes.
I also tried to extrude a triangle with a specific angle but then i was only able to move the top note up and down changes the hight. Doing it this way the top note also kept beeping in the center-point of the triangle.
My autocad light for some reason makes all text in the vertical position. I have tried to change it but the vertical selection in the style box will not change. What do I do to highlight it to make the change.
View 4 Replies View RelatedI developed a program in VBA that used a form to allow users to create new dwg files based on selected criteria the vba program would then create and open the new dwg file and in the case of sheet files, it would populate title block attributes as well.
In vba, the forms focus was carried to the new file so the application would fill in the attributes, etc. as described above,
However in vb.net, I have not been able to get the form to recognize the new file. The program creates and opens the file, however the forms focus is still on the initial file so any actions to be applied to the new file are not carried out.
I need to move areas of an image that I have selected using the unit of points.For example, I get corrections in our copy where I need to move certain parts of the image 8 points up or over 3 points.
I can use the measurement tool to meausure the distance but then it disappears when I try to actually move the selection. The same thing happens when I try to use guides to mark the area. I wish I could just set Photoshop to "nudge" in points instead of pixels.Is there any way to make this easier?(Photoshop CS4 version 11)
make a LISP that will work with my room dimensioning? I'd like to be able to specify the width and depth of the room using a command similar to the "dist" command, and then click a point to place a text based on the distances gathered. I'd also like the text to be formated into architectural units and displayed like this: 12'-0" X 13'-5". Also, if possible, round the result to the nearest inch (to avoid 1/2" and 1/4" dimensions).
View 9 Replies View RelatedI want to warp a specific selection of a portion of a layer, but everytime I do this the warp tool cuts off the edges. Is there a way to prevent the warp tool from doing this ?
View 2 Replies View Related