AutoCad :: How To Create Three Side Based Pyramid As A Solid
Dec 15, 2011
I want to create a pyramid with a base of three sides with different lenght. In the end i want to have a solid where i can drag and move the notes to change the hight,lenght and the angle of the sides.
I already managed to draw it in 3d but now i want to convert the drawing into a solid and keep it flexible to change the parameters by draging the notes.
I also tried to extrude a triangle with a specific angle but then i was only able to move the top note up and down changes the hight. Doing it this way the top note also kept beeping in the center-point of the triangle.
View 7 Replies
ADVERTISEMENT
Feb 1, 2011
Which tool would be used to draw a small pyramid and fill with a solid color?
How could I rotate this pyramid 45 degrees?
View 5 Replies
View Related
Feb 17, 2012
How would I create a pyramid where the base and top are rectangles not squares?
View 6 Replies
View Related
Dec 27, 2013
I have been trying to create a 3D pyramid using Illustrator CC. All the tutorials I have found have been telling me I need to create a custom bevel, but the Bevels.ai file is not in the plugins folder as it used to be. How do I create a custom bevel in Illustrator CC?
View 9 Replies
View Related
Oct 30, 2013
How do you draw a truncated pyramid from scratch; notwithstanding the Revit family pyramid?
View 2 Replies
View Related
Sep 17, 2013
I have two picture files and I just want to create one file, displaying both pictures side by side. I have been reveiwing all of the functions in my Adobe Photoshop Elements Version 11 and I can't figure out how to do it.
View 2 Replies
View Related
Jan 13, 2014
I want to create a banner heading from two pics side by side, but mixing together at the centre with about a 15% overlap into each other.
View 1 Replies
View Related
Oct 28, 2013
i want resize solid, but just one side, like in photoshop. It is possible? When i try, its resize my solid in whole dimension.
View 4 Replies
View Related
Feb 6, 2013
How to do the automatic creation of 3D solids based on plans and sections element. How 3D objects are created in prosteelu.
View 9 Replies
View Related
Aug 23, 2012
I want to create a command:
My selection set consists of dbpoints that exists on my drawing and they are more or less in line
I create a new point3dcollection with this db points
I want to create a 3d polyline based on this point3d collection
My problem is : how to sort this point3d collection based on a picked start point and picked end point?
The only idea I have is:
from start point i calculate the distance to each point3d from collection and based on the results i sort the point3d collection based on distances.
View 2 Replies
View Related
Jun 14, 2012
My vision is when someone inserts "block A", a promt will come up and ask "how many of "block A" do you need?" Based on how many you need, it will insert the block along with the arrayed amount the user has typed in.
View 1 Replies
View Related
Jan 17, 2012
how to create a selection set based on a specific Multileader style? I can currently creating a typedvalue array to define the filter criteria, but cannot find the DXFCODE for the Multileader style.
Ex.
TypedValue[] acTypeValAr = new TypedValue[1];
acTypeValAr.setvalue(new TypedValue(DXFCODE, "Multileader Style"),0);
View 2 Replies
View Related
Oct 10, 2012
I developed a program in VBA that used a form to allow users to create new dwg files based on selected criteria the vba program would then create and open the new dwg file and in the case of sheet files, it would populate title block attributes as well.
In vba, the forms focus was carried to the new file so the application would fill in the attributes, etc. as described above,
However in vb.net, I have not been able to get the form to recognize the new file. The program creates and opens the file, however the forms focus is still on the initial file so any actions to be applied to the new file are not carried out.
View 3 Replies
View Related
Jun 29, 2012
Here's something that should be simple, I want to create a template for cutting a square hole 125 mm on a side.
I have gone into Drawing Utilities and set the units to millimeters. I drew a square 125 units on a side.
In paper space, I selected a template that is 11" X 17". I set the scale to 1:1. I thought that that would give me a sheet I could print out ledger size with a 125mm square drawn on it, but no, it is not even close. As near as I can figure, the square is 125" on a side in paper space.
View 5 Replies
View Related
Oct 19, 2011
I have a macro that I acquired somewhere (possibly these boards, can't remember now) for placing a parts list. I have modified it somewhat to change the location on the sheet where the list gets placed, as well as a sub that starts the autoballoon command afterward.
The macro is set up to place the parts list in the upper left corner, by adding the parts list width to the Mini Point of the border. This works perfectly well, except that we have two parts list styles, and they are differently sized.
What I would like to do is have the macro detect the parts list style, and change the offset value depending on which style it finds. I am an extreme novice with the API, who basically knows just enough to tweak sample code a bit, and have not been able to find anything close enough to use as an example.
How I should go about this, or even post some samples of something similar? Current code is shown below.
Public Sub CreatePartsList() On Error Resume Next ' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument 'Set a reference to the active sheet. Dim oSheet As Sheet Set oSheet = oDrawDoc.ActiveSheet ' Set a reference to the first drawing view on ' the sheet. This assumes the first drawing ' view on the sheet is not a draft view. Dim oDrawingView As DrawingView Set oDrawingView = [code].......
The macro does not have to set the parts list style - that is controlled by the drawing Standard. It just needs to detect what it is, and place the list accordingly.
View 7 Replies
View Related
Dec 19, 2012
make a LISP that will work with my room dimensioning? I'd like to be able to specify the width and depth of the room using a command similar to the "dist" command, and then click a point to place a text based on the distances gathered. I'd also like the text to be formated into architectural units and displayed like this: 12'-0" X 13'-5". Also, if possible, round the result to the nearest inch (to avoid 1/2" and 1/4" dimensions).
View 9 Replies
View Related
Apr 10, 2012
I am trying to create an assembly with a U channel (side ditch) that's top will follow the sidewalk it is next to but I need the profile of the U channel to be different than that of the roadway. Is there a way to create a custom subassembly part that will do this? Can I create a different allignment/profile for the bottom of the U channel that can then link to the other assembly?
The only other think I can think of is to use a dynamic block to add the U channel to my cross sections, but that will take a lot of time to do.
View 2 Replies
View Related
Apr 26, 2013
I need to create a triangular grid of injection boreholes with side lengths of 2m and can't think of a slick way to do it.
I've created two linear arrays of polyline at the correct spacings and MAPCLEANed to break all the crossing lines so I now have line segments at the correct locations.I now need to put a point at each vertex to show the locations of the holes.
I'm sure there must be a better way of doing this - just thinking while typing: if the two array are on different layers, I could JOIN the polys on each layer and then add POINTS at vertices??
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 9 Replies
View Related
May 23, 2013
WS with R2013 & R2014 installed side by side.
R2013 is stating on start up that the Geotechnics module has been loaded and displays the Tab for it.But I haven't installed the Geotechnics module for 2013 yet and it doen't work.
View 2 Replies
View Related
Jan 3, 2014
I downloaded AutoCAD on my windows 7 home premium,but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 1 Replies
View Related
Mar 15, 2012
I've got to plot several "half-size" sets of drawings (originally 24x36 drawings) and I am trying to minimize paper waste. I thought there was a way to set the drawings to fit multiple copies side by side but I am at a loss right now.
Civil 3D 2011 Version 2.1
Win 7 x64 SP1
Intel Core i5 3.33 GHz
4 GB RAM
View 4 Replies
View Related
Jan 3, 2014
I downloaded AutoCAD architecture 2014 on my windows 7 home premium, but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect.see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 2 Replies
View Related
Nov 12, 2013
I have just updated to Windows 8.1,(32 bit) and when I try running Autocad 2013 I get this message:
C:Program FilesAutodeskAutoCAD 2013acad.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
what the "application event log" is or the "command-line sxstrace.exe".
View 2 Replies
View Related
Jul 25, 2012
Is it possible within the drawing to have model space and paper space displayed side-by-side like two vertical split screen viewports?
View 3 Replies
View Related
Nov 27, 2012
I am trying to invoke AutoCAD 2012 and am gettting the following error: CUsersatillgrenDesktopAutoCAD.exe "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
View 2 Replies
View Related
Dec 29, 2011
the expression in question is part of larger lisp routine to create and rotate text based on the object selected and the viewtwist variable (we use dview twist to rotate our views when needed)
So the expression in question:
(< (/ pi 2) ang (* pi 1.5)
where ang is the total angle used to determine proper rotation of the text.
Now the problem. In most cases where ang = 90 (or 1.5708 radians) this works fine. the two exceptions i have encountered
in testing are a line at 70 degress, viewtwist 20, and line at 50, viewtwist 40. For whatever reason at these two conditions the expressoin evaulates True instead of nil and rotates the entire text object incorrectly (180 degrees). So question is how exactly is this being evaluated? i know its comparing ang (* pi 1.5) to (/ pi 2). is there some sort of rounding error? or maybe the expression needs a wee bit more definition? attached image and full lisp routine for reference of what is happening, blue text is angle of the line as created by routine at viewtwist 0.
View 1 Replies
View Related
Mar 24, 2013
i am trying to use a seamless vector pattern i created in illustrator in photoshop, however when i resize it it is rasterized. is there a way to keep it a vector and use it as a layer effect?
View 1 Replies
View Related
Oct 23, 2008
With any lens, there is an inherent distortion. I've seen grids at photozone.de in their lens reviews. If possible, I want to use Photoshop to create the same distortion my lens would create. For example, if I photograph a sheet of graph paper, the result would be a distorted grid. Can I get photoshop to take an UN-distorted grid, and distort it in the same manner? How complicated is this, if possible?
View 1 Replies
View Related
Apr 17, 2013
I'd like to either use Grid view sorted by dimensions, or create a Collection based on dimensions. I can do this in Adobe Bridge, but thought Lightroom would add functionality to this.
View 28 Replies
View Related
Dec 8, 2011
I am creating three shapes out of a pyramid. I figure if I split the pyramid in half, I can create two, then mirror them and blend the two together to make the final design. I have figured out how to create a pyramid by extruding a cube with a taper.
My pyramid is 40mm x 40mm x 40mm. I need to cut it in half, diagonally, top to bottom.
When I have the pyramid in the workspace, I see nothing that I can select - that will allow me to create lines where I need to - to cut them out.
I'll add a logo in 3-d that I am trying to create. (also, I am using this project to familiarize myself with the software.)
View 9 Replies
View Related
Sep 29, 2013
Assume that I have an odd pyramid 3D-solid say with a polygon basis that lies on a "floor". The apex was higher than the ceiling, so I "sliced" the pyramid to fit it right under the ceiling.
Now, I change my mind and want to make the ceiling slightly higher (say, 1"): after raising the ceiling I am left with a sliced pyramid that is cut 1"below the ceiling. Question is : what is the best way to re-extend the pyramid (and make it look like it was cut by the higher ceiling) ?
I cannot just "undo" because too many things happened in the meantime.
I can imagine re-creating the unsliced pyramid by press-pulling the upper sliced surface and then slice this extension with each side of the original sliced pyramid and ultimately re-slice with the new ceiling. Can I do better / faster than that ?
View 7 Replies
View Related
