I need to create detail views in a 2d layout drawing. What I mean is that a 'zoomed' view inside a "circle". The view magnifies the specific part of a drawing, but the dimension value keep the same. What command should I use?
View 9 RepliesSometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies View Relatedis it possible to create a detail view of an Iso view which is created with perspective camera? I tried it but it does not seem to let you have the option of selecting the connection line or detail view boundary?
View 5 Replies View RelatedI've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I have a detail view of a groove on a cylinder. I want to dimension a diameter in which I only see one side, the other side is not in the detail view.
From some posts I see that I should auto insert a centerline then dimension from centerline then choose options "dimension linear".
First when I try to auto insert centerlines it does not insert the centerline for me. Perhaps because my detail is smaller. If I make the field for the detail view larger it makes a centerline, but I dont want to do that. I have tried making a sketch of the other side and the centerline. When I dimension from here I do not have the right click option of dimension linear, instead only arrowhead options.
Using Inventor Professional 2012
How do I turn this circle off?
View 6 Replies View RelatedIs there a property or method that can control the location of the name for a detail view? For example the picture below. Detail "B" represents the api default. Detail "C" representes where I want to put the text. All the properties, aside from "Name" apparently deal with the detail view itself.
View 1 Replies View RelatedI have a flat pattern with ordinate set dimension, taken detail from one end.
parent view having ordinate dimension from left end and i have taken detail view of right end.
i need detail view dimension with same origin dimension as like parent view.
How can I move a detail view to another sheet in a drawing in 2009? I have only been able to copy the detail and it's parent view to the 2nd sheet and then suppress the parent view on the 2nd sheet so that only the detail view is visible.
However, when I go back to the first sheet and try to suppress or delete the detail view, it also deletes / suppresses the detail circle from the parent view.
I know I'v done this before but I'm having trouble getting a detail view to just show the jagged cut lines where it crosses the part only & not all the way around it. See images attached to show the problem.
Inventor Suite 2013 Ultimate
While creating a drawing yesterday, I noticed that the RMB Options to modify a detail view has disappeared?
- Cutout Shape
- Detail Boundry
- Connecting line
I am not sure how long this has been like this, What I do know is that I had a corrupt model, (Broke when it migrated to 2013) I restored from backup and tested the model in ver 2012.
I can not say if bouncing between the two versions of inventor has perhaps changed something, or of this option has not been available for a while?
Autodesk Product Design Suite Premium 2014 SP1 Build 222
Intel Core i7 (950@3.07GHz)
Windows 7x64 (Home) - 12GB Ram
Nvidia GeForce GTX 560 Ti (1Gig - Ver:331.65)
How does one remove the boundary box for a detail view? I don't want it sitting in my main view, as this is a conveyor and it's very obvious at to where the drive arrangement is sited. See attached.
I'm guessing changing it to another layer that does not print is one option, or?
I've created a view in my presentation file and tweaked all my components to where I want them. How do I change the level of detail associated with a particular explosion already created? I know when you create the view you can select which representation and level of detail to use, but how do you change these after the exploded view is created?
View 6 Replies View RelatedHow to use ellipse as boundary for detail view? I can only see rectangles and circles as my choices.
View 4 Replies View RelatedIs there a way so that in the window Detail View,
I will permenantly get a
Fenche Shape: rounded
cutout Shape: Rounded
Disyplay full Detail Boudary: at on
Display connection line: at on
Unless, I have to change them each time...
In my assembly drawing I have been able to add random dimensions anywhere I needed them.
Except for the detail view. How come I can select the two end points for my dimension, but it wont let me place it?
(Colossians 3:23-25)
All the 'whats new' info talk about the Detail View Tools as a Tab etc in the ribbon
but it doesnt appear on the ribbon...
How do you access it?
I've had this issue now for quite a while. Seems to only happen with wires that are made in the Cable & Harness module. And the odd part is that not all wires do this and not all View Rep/Detail views do this.
Regardless of wether I have a wire visible or not in a locked View Rep it still shows up in the Detail View on the .idw. And yes, I have the 'associative' check box checked.
I've unchecked the check box, nothing. Rechecked the box, nothing. Updated the views individually, nothing.
I have a blown out detail on one of my Inventor drawings, I would like to toggle the visibility of some parts in this detail view however when I RHMB these under the browser I can't turn off the visibility
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Can I have an assembly cut and make a couple of view reps or level of details so that one has the assembly cut and one does not.
View 5 Replies View RelatedHow can I turn it off permanently? Or change the default to off? It's always on when I open my drawings.
I save the files with it off, but when I reopen, it's still on. A real pain in the butt when plotting since if I batch plot, all of my contours are off, which eliminates using batch plot entirely. Luckily, I only have 5 figures at the moment, but once we get to design phase I will have many more and require batch plotting.
I'm using civil3d 2013, I have never run into this before with any other versions.
It seems that Views are easier to use, are there any benefits of View option over Level of Detail and vice versa?
View 3 Replies View RelatedI can find a method to copy a Design View to a Level of Detatil (DesignViewRepresentation.CopyToLevelOfDetail)
But the opposite way (i.e. LevelOfDetailRepresentation.CopyToDesignView) doesn't seem to exist - it is possible in the GUI.
Will I have to traverse the complete structure and set visibillity one by one to obtain the function then? Or are there a better/faster way to go?
What controls the line weight of the break lines in the detail views? Have tried everything, but still have them shown very thick.
View 2 Replies View RelatedWe have a large assembly that we've been trying to get details views off of and it's taking anywhere from 15 to 45 minutes to create each detail view. IDW. We're using LOD and derived assemblies as it's 5000+ parts, but Inventor is simply bogging down and sucking system resources in the creation process. I've used every trick in the book that I know, butIt's taken me all day to get one drawing done.
View 9 Replies View RelatedIn a detail view, how can I change the line type? The contour of the detail view?
View 5 Replies View Relatedwhen i have a detail view on the layout, the text and the border line have the same line thickness. I want that the text will be bold (0.5mm thick) and the border line will be thicker (0.13mm thick).
i have tried to change the layer's line thickness, but it effected both the text and the line border. how can i separate between them?
Is it possible to alter the Fence Shape of a detailed view from circular to rectangular after the view has been created?
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
I am trying to do a detail view on an isometric and i would like a long sausage shape angled with the isometric. the detail views are round or rectangular horizontal, i would even be happy with a rectangle on the piss in line with the isometric.
i tried putting on a sketch of my sausage shape and performing a breakout view but it will only take away the components within the sausage, i want to flip this. I then tried putting a big rectangle on the same sketch in the hope that it would leave the sausage as an island, (much like a hatch) .
Background: Our company has decided to switch from drafting in AutoCAD to Inventor (which we already use to model) and we have started looking at making our templates intuitive using iProperties, parameters, and functions to reduce manual entry of part information in turn to reduce human error. None of us have any experience coding besides a bit of LISP.
Problem: Perhaps it is a pipe dream, but one thing I would really like resolved is we have no connection between the Parts list information (specifically item number and quantity) on the assembly sheet and the part detail on another sheet. Our custom part detail title block pulls the material information and "Inventory Part Number" from custom iProperties we have set up at the part level, but we still need to reference the parts list in the other sheet and then manually enter the item number and quantity. Is there a way to use the "Inventory Part Number" property (which shows up in the parts list on a different sheet) to populate our custom block?
What line weight changes the thickness of the border around a Detail View in 2012?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot