AutoCad :: Invalid Or Incomplete DXF Input Error Message
Jun 11, 2013
"Unknown value "AC1027" encountered in drawing version.Invalid or incomplete DXF input -- drawing discarded. Press Enter to continue." (then the file disappears)
MY workflow:I am opening up DXF files created by me with RASPLOT 2.5 and RASPLOT 3.0 (an Army Corp of Engineers Hyrdraulic model extraction program) I bring the DXFs into AutoCAD for better cleanup of the 2D graph it creates of flood profiles.
OBSERVATIONS:Others in my office have opened the same engineering models in RASPLOT and been able to bring DXFs into AutoCAD 2011/2012 in with no problem. It had worked for me in the past, but I can't recall what happened to all of a sudden make it not work, EVER. My co-workers can work with the RASPLOT DXFs in Windows XP and Windows 7.
ATTEMPTED SOLUTIONS:-I upgraded my RASPLOT version first from 2.5 to 3.0, then upgraded my AutoCAD2011 to 2012. No change.
-If I create the DXF on my computer, then open it remotely from another computer's AutoCAD, I still get the same error message. (My only solution has been to create my DXF by remotely logging into another computer with RASPLOT then it will open in my computer's AutoCAD.)
- I tried changing the .dxf file path to .dwg but that doesn't work.
I received the drawings with comments from consultant.The cad drawings are infected with stamps.I was ordered to use such drawing to update the routing of the services.When I use DXFOUT to change it to the DXF version 2000.I can't open it the dxf drawing.the error like below when i tried to open the dxf:
Undefined shape 4 Invalid or incomplete DXF input -- drawing discarded. Press ENTER to continue.
I get the above error message when i try to open a DXF file which was exported from LSS. The survey data from TPS seems to export fine, but the GPS data won't open.
I've read the previous posts on this error messages, but most seem to be relevant to autocad 2007. However tried the remedy suggested (through MS word) but that didn't work.
I am receiving an invalid input message when trying to create a curve between two lines. My drawing units are set to architectural. The problem is summarized as follows:
1- In Lines/Curves menu, select curve between two lines.
2-Select first tangent
3- Select second tangent
4-Select radius option
5- Enter 8'6"
6- After entering the radius I receive an invalid input message.
7- But if I enter the radius as 102 (102 inches) the curve is created without any problem.
I recently installed Inventor Premium 2012 and I am not able to make a bolted connection or creat a tapped hole. I get this error message: Invalid thread data table. Please check Thread.xls file.".
I have a baseplan I was sent for senior design project and it was previously created in an earlier version of autocad. However Im not sure which version it was created in. There are almost 3000 points and contours but I can not use these points to create a surface. I am ultimately trying to create a surface and then a profile for a road to design vertical curves throughout.
I cut out a few points and copied them into a new drawing due to the size of the actual file
I am using Corel Graphic Suite X3. I created one file of 330 MB. It contains text and images....
But now when i am opening this file it say "File contains Invalid Object" "IGNORE:ABORT:RETRY"..I chose every option but nothing seems to happen and corel draw gets hanged..I tried importing it..also i tried re installing it but nothing seem to work...
this file is very imp and i have to open it...Wht to do? Also any future precautions, if any?
And am i using the right version? Im mean is is because this is the lower version and i need 2 upgrade?
I'm trying to use an expression for text height and everytime I enter the name of the expression I get "Invalid Input". Is there a trick to doing this?
I even changed a style that "HAD" allowed me to use an expression, to a number then tried to reenter the same expression name that was there and get "Invalid Input".
I am UNABLE to follow a tutorial on how to make a repeatable pattern using 'texture transfer' on some fire I want to make into a pattern!!! every time I select the area I want to use and the 'input map' and paste as new image and I tell Resynthesizer to use that image it ALWAYS errors out as "The Input Map Should Be The Same Size As The Input Texture Image" according to the tutorial another person gave me on this forum he said NOTHING about being the same size!!! in fact, his selection was SMALLER than the actual image that he was using Resynthesizer on!!!
When I try to open any of the Hydraflow extensions, I get the following message: "Installation error Invalid installation. Program ending." I ran a repair from Windows, but get the same result. How to successfully open/use any of these Hydraflow components in 2010?
Using VB2010 Express to practice writing code to run things in Inventor 2012. I am an extreme beginner at this, and I am trying out a simple program that opens up Inventor, and when you click a button, it will open up the filename listed in the subroutine. I have attached a .jpg of my code. The program will open Inventor, and open the file, but as soon as the file is finished loading and displays on the screen, it throws the error you see in the .jpg.
I'm currently getting the "1324 Error. The folder path 'My Documents' contains an invalid character."
when trying to run AutoCad 2010. It had been working fine previously, but now it gives this error and won't allow me to use it. I am also unable to uninstall or reinstall the program without getting the same error.
I have confirmed that the profile is not set to roaming. I have also tried deleting the registry entries as recomended here:
[URL]
The user account is local administrator. The OS is Windows 7 64bit.
I'm trying to import files from my GoPro's, i can watch the video's on Quick Time player, but when i go to import them to either V4 or V5 it comes up with a invaild file error.
Just installed 2014 and have a few issues right away. I checked out the New Features webpage and attempted to change the Viewport Layout using the new Menu dropdown. When I click on any other layout other than the default the whole UI begins to flicker and Max completely locks up and I have to end the process to close it.
Now when I load Max I get an error box that says: "Invalid flyout button ID!" After clicking OK on 6 identical successive Error boxes they are all gone and Max is OK.
I uninstalled my display drivers and installed the latest Max Performance driver 311.50 for my Quadro 4000.
Update: I removed a custom toolbar that I created thinking it might be throwing the error and then relaunched Max. Same error. Then I reinstalled Max using the Repair/Reinstall feature instead of completely uninstalling and reinstalling. When I open Max I still get the "Invalid flyout..." error. FYI, upon my initial install and first opening of Max it opened normally. It was only after I had the switching workspace event that this error stated. The Reinstall feature did not solve it.
3ds Max Design (3D Studio thru Max 2014), ASUS P9X79 Motherboard, Intel i7-3960x, Hydro H80 CPU Chiller, 32GB DDR3 Ram, Quadro 4000 Display Adapter
Whenever I switch renders layers I get the following error
/ Error: ...cameraMaskChange(unifiedRenderGlobalsWindow|rgMainForm|tabForm|mentalRayTabLayout|mentalRayCommonTab|scrollLayout|commonTabColum // // Error: Invalid use of Maya object "unifiedRenderGlobalsWindow|rgMainForm|tabForm|mentalRayTabLayout|mentalRayCommonTab|scrollLayout|commonTabColumn|rgRenderableCamerasFrame|renderableCamerasSW|mayaSoftwareCameraLayout|columnLayout27|columnLayout28|columnLayout29|checkBoxGrp71". // [code]....
Error: Invalid use of Maya object "persp"..it will happen for every camera in the scene until I close and re-open the scene! I do not know what causes it but it seems like whenever I delete a render layer it starts happening and it is driving me positively bonkers!
I have got a problem about getting user input. In a function i am first getting a selection from the user by editor.getselection(...)
then i show a palette set with my user control in the same function. everything is fine so far.
but after showing paletteset i try to get a string from the user by editor.getstring(...) in the same function but statement continues as i never request it. when i check the PromptResult status it is equal to cancel.
i tried to lock the document but it doesnt work either. when i comment out "showpalette(true)" it works correctly. i realized that if my document window s state is not WindowState.Maximized then my code works just fine but if it is WindowState.Maximized it does not work.
In the middle of a photoshop session the application spontaneously quit (when changing colour palette). This is a totally legal copy of CS2, recently successfully transferred to a new-ish Mac running Snow Leopard. When I tried to restart P'shop it came up with an error message "Your Adobe Photoshop user name, organisation, or serial number is missing or invalid. The application cannot continue and must now exit."Subsequent attempts to launch p'shop came up with a supposedly humorous "Space Monkey" splash screen.
When I try to open the program, it gives me the following error: "Could not initialize photoshop because the preferences file was invalid (it has been deleted). I've uninstalled and re-installed the program.
In my acaddoc.lsp I have it load an autoload.lsp file that contains many lisp routines (attached). I am getting the "extra right paren on input" error. It appears to error after the third line in the autoload file "san18"....I removed everything after the third line and no error, I put them back and it errors and only loads first three?
I am using Civil 3D 2014 and I have added all neccesary paths to the trusted locations.
I'm using AutoCAD 2012 LT and have having problems inserting/updating/editing fields. This is the error that appears
"There are no registered modules to edit fields or demand loading is currently disabled". When I click OK the Field pop-up appears empty! (see attached)
The BEDIT command is also not working. It was all working up until a few days ago! I have downloaded the most recent Service Pack and it's still not working.
A user is having issues with plotting from AutoCAD LT, when trying attempting a normal plot to PDF the program crashes and he is forced to close it, also when changing the way he plots to plot to DWG PDF it starts to work correctly but brings up a fatal error message as below and attached:
FATAL ERROR: Unhandled Access Violation Writing 0x0014 Exception at 778e224dh
When i try to convert my .dwg to a pdf on my laptop (second computer) i get an error message that the drawing might be password protected. it happens on all my autocad drawings
