AutoCad :: Error / Invalid Or Incomplete DXF Input - Drawing Discarded
Aug 10, 2009
I received the drawings with comments from consultant.The cad drawings are infected with stamps.I was ordered to use such drawing to update the routing of the services.When I use DXFOUT to change it to the DXF version 2000.I can't open it the dxf drawing.the error like below when i tried to open the dxf:
Undefined shape 4
Invalid or incomplete DXF input -- drawing discarded.
Press ENTER to continue.
what can i do now?
View 9 Replies
ADVERTISEMENT
Jun 9, 2011
I get the above error message when i try to open a DXF file which was exported from LSS. The survey data from TPS seems to export fine, but the GPS data won't open.
I've read the previous posts on this error messages, but most seem to be relevant to autocad 2007. However tried the remedy suggested (through MS word) but that didn't work.
View 9 Replies
View Related
Jan 4, 2013
While opening a dxf file, i find the message:
Syntax error or premature end of file on line 943.Invalid or incomplete DXF input -- drawing discarded.
I have a approx. 10000 dxf files. Is it possible to know which files are invalid without opening them?
View 7 Replies
View Related
Jun 11, 2013
"Unknown value "AC1027" encountered in drawing version.Invalid or incomplete DXF input -- drawing discarded. Press Enter to continue." (then the file disappears)
MY workflow:I am opening up DXF files created by me with RASPLOT 2.5 and RASPLOT 3.0 (an Army Corp of Engineers Hyrdraulic model extraction program) I bring the DXFs into AutoCAD for better cleanup of the 2D graph it creates of flood profiles.
OBSERVATIONS:Others in my office have opened the same engineering models in RASPLOT and been able to bring DXFs into AutoCAD 2011/2012 in with no problem. It had worked for me in the past, but I can't recall what happened to all of a sudden make it not work, EVER. My co-workers can work with the RASPLOT DXFs in Windows XP and Windows 7.
ATTEMPTED SOLUTIONS:-I upgraded my RASPLOT version first from 2.5 to 3.0, then upgraded my AutoCAD2011 to 2012. No change.
-If I create the DXF on my computer, then open it remotely from another computer's AutoCAD, I still get the same error message. (My only solution has been to create my DXF by remotely logging into another computer with RASPLOT then it will open in my computer's AutoCAD.)
- I tried changing the .dxf file path to .dwg but that doesn't work.
View 2 Replies
View Related
Apr 29, 2012
A colleague of mine made the stupid mistake of using an unauthorized personal computer to save a work file, but she used an educational-licensed AutoCAD.
We do use legally purchsed and registered ACAD 2012 in the office. However, as expected, the file has been marked as being made by an educational version of ACAD and, therefore, cannot be sent back to our client.
A superficial search shows the solution as saving to dxf and back to dwg.
However -and herein lies my problem- when I save as dxf, the following error occurs:
"Error in LTYPE Table
Linetype name with vertical bar is not marked dependent on line 9540.
Invalid or incomplete DXF input -- drawing discarded.
Press ENTER to continue:"
And then nothing happens. I used both the "save as" features, as well as the "dxf out/in" and, since both seem to be the same, neither worked.
View 2 Replies
View Related
Aug 23, 2011
I am getting a Error with this
Autodesk.AutoCAD.ApplicationServices.Application.SetSystemVariable("DIMSCALE", 12.0);
I am getting a "eInvalidInput" error.
View 3 Replies
View Related
Jan 15, 2013
I'm trying to use an expression for text height and everytime I enter the name of the expression I get "Invalid Input". Is there a trick to doing this?
I even changed a style that "HAD" allowed me to use an expression, to a number then tried to reenter the same expression name that was there and get "Invalid Input".
Civil 3D SP2.1
64 bit
windows 7
View 6 Replies
View Related
Aug 20, 2013
I am receiving an invalid input message when trying to create a curve between two lines. My drawing units are set to architectural. The problem is summarized as follows:
1- In Lines/Curves menu, select curve between two lines.
2-Select first tangent
3- Select second tangent
4-Select radius option
5- Enter 8'6"
6- After entering the radius I receive an invalid input message.
7- But if I enter the radius as 102 (102 inches) the curve is created without any problem.
View 2 Replies
View Related
Mar 15, 2013
I am UNABLE to follow a tutorial on how to make a repeatable pattern using 'texture transfer' on some fire I want to make into a pattern!!! every time I select the area I want to use and the 'input map' and paste as new image and I tell Resynthesizer to use that image it ALWAYS errors out as "The Input Map Should Be The Same Size As The Input Texture Image" according to the tutorial another person gave me on this forum he said NOTHING about being the same size!!! in fact, his selection was SMALLER than the actual image that he was using Resynthesizer on!!!
View 4 Replies
View Related
Sep 1, 2009
Size of Drawing file is 4.33 mb. But Can not Open. A message appears " Drawing File Invalid"
Can I Retrieve the data.? No backup file is available in my system. I have tried with recovery tool but unable to get original data
for Any other option .
View 9 Replies
View Related
May 15, 2012
Using VB2010 Express to practice writing code to run things in Inventor 2012. I am an extreme beginner at this, and I am trying out a simple program that opens up Inventor, and when you click a button, it will open up the filename listed in the subroutine. I have attached a .jpg of my code. The program will open Inventor, and open the file, but as soon as the file is finished loading and displays on the screen, it throws the error you see in the .jpg.
View 2 Replies
View Related
Jun 13, 2012
I recently installed Inventor Premium 2012 and I am not able to make a bolted connection or creat a tapped hole. I get this error message: Invalid thread data table. Please check Thread.xls file.".
View 4 Replies
View Related
Mar 4, 2013
I have a baseplan I was sent for senior design project and it was previously created in an earlier version of autocad. However Im not sure which version it was created in. There are almost 3000 points and contours but I can not use these points to create a surface. I am ultimately trying to create a surface and then a profile for a road to design vertical curves throughout.
I cut out a few points and copied them into a new drawing due to the size of the actual file
View 3 Replies
View Related
Sep 26, 2012
I'm currently getting the "1324 Error. The folder path 'My Documents' contains an invalid character."
when trying to run AutoCad 2010. It had been working fine previously, but now it gives this error and won't allow me to use it. I am also unable to uninstall or reinstall the program without getting the same error.
I have confirmed that the profile is not set to roaming. I have also tried deleting the registry entries as recomended here:
[URL]
The user account is local administrator. The OS is Windows 7 64bit.
View 1 Replies
View Related
May 9, 2012
I'm trying to import files from my GoPro's, i can watch the video's on Quick Time player, but when i go to import them to either V4 or V5 it comes up with a invaild file error.
View 1 Replies
View Related
Apr 29, 2013
Just installed 2014 and have a few issues right away. I checked out the New Features webpage and attempted to change the Viewport Layout using the new Menu dropdown. When I click on any other layout other than the default the whole UI begins to flicker and Max completely locks up and I have to end the process to close it.
Now when I load Max I get an error box that says: "Invalid flyout button ID!" After clicking OK on 6 identical successive Error boxes they are all gone and Max is OK.
I uninstalled my display drivers and installed the latest Max Performance driver 311.50 for my Quadro 4000.
Update: I removed a custom toolbar that I created thinking it might be throwing the error and then relaunched Max. Same error. Then I reinstalled Max using the Repair/Reinstall feature instead of completely uninstalling and reinstalling. When I open Max I still get the "Invalid flyout..." error. FYI, upon my initial install and first opening of Max it opened normally. It was only after I had the switching workspace event that this error stated. The Reinstall feature did not solve it.
3ds Max Design (3D Studio thru Max 2014), ASUS P9X79 Motherboard,
Intel i7-3960x, Hydro H80 CPU Chiller, 32GB DDR3 Ram,
Quadro 4000 Display Adapter
View 4 Replies
View Related
Oct 22, 2011
Whenever I switch renders layers I get the following error
/ Error: ...cameraMaskChange(unifiedRenderGlobalsWindow|rgMainForm|tabForm|mentalRayTabLayout|mentalRayCommonTab|scrollLayout|commonTabColum //
// Error: Invalid use of Maya object "unifiedRenderGlobalsWindow|rgMainForm|tabForm|mentalRayTabLayout|mentalRayCommonTab|scrollLayout|commonTabColumn|rgRenderableCamerasFrame|renderableCamerasSW|mayaSoftwareCameraLayout|columnLayout27|columnLayout28|columnLayout29|checkBoxGrp71". //
[code]....
Error: Invalid use of Maya object "persp"..it will happen for every camera in the scene until I close and re-open the scene! I do not know what causes it but it seems like whenever I delete a render layer it starts happening and it is driving me positively bonkers!
View 2 Replies
View Related
Aug 12, 2011
I have got a problem about getting user input. In a function i am first getting a selection from the user by editor.getselection(...)
then i show a palette set with my user control in the same function. everything is fine so far.
but after showing paletteset i try to get a string from the user by editor.getstring(...) in the same function but statement continues as i never request it. when i check the PromptResult status it is equal to cancel.
i mean
Transaction acTrans = null;
Document acDoc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
Database acCurDb = acDoc.Database;
acDocLock = acDoc.LockDocument();
using (acDocLock)
[code].........
i tried to lock the document but it doesnt work either. when i comment out "showpalette(true)" it works correctly. i realized that if my document window s state is not WindowState.Maximized then my code works just fine but if it is WindowState.Maximized it does not work.
View 4 Replies
View Related
Sep 6, 2013
In the middle of a photoshop session the application spontaneously quit (when changing colour palette). This is a totally legal copy of CS2, recently successfully transferred to a new-ish Mac running Snow Leopard. When I tried to restart P'shop it came up with an error message "Your Adobe Photoshop user name, organisation, or serial number is missing or invalid. The application cannot continue and must now exit."Subsequent attempts to launch p'shop came up with a supposedly humorous "Space Monkey" splash screen.
View 4 Replies
View Related
May 31, 2013
When I try to open the program, it gives me the following error: "Could not initialize photoshop because the preferences file was invalid (it has been deleted). I've uninstalled and re-installed the program.
View 3 Replies
View Related
Feb 7, 2013
I've been designing for 3 days. A very important design but power cut in the apartment. I tried to recover the file. I've failed.
Should I save a picture? I look on the picture and can draw. I using Adobe Photoshop CS5.
View 2 Replies
View Related
Jan 28, 2013
I must have this item working.
No I don't have Google Chrome or the anti-virus programs mentioned I have Kaspersky Pure
View 7 Replies
View Related
Jun 18, 2013
In my acaddoc.lsp I have it load an autoload.lsp file that contains many lisp routines (attached). I am getting the "extra right paren on input" error. It appears to error after the third line in the autoload file "san18"....I removed everything after the third line and no error, I put them back and it errors and only loads first three?
I am using Civil 3D 2014 and I have added all neccesary paths to the trusted locations.
View 4 Replies
View Related
Jul 5, 2013
I'm getting this error in the middle of launching Civil 3D2014 x64 hotfix1 from the uncustomized Civil 3D 2014 Imperial icon (see command history):
Loading AEC Base...
Loading AECC Base...
Loading AECC ETransmit...
Loading AEC Base Extended...
Loading AEC Core...
Loading AEC Application...
Loading AEC Project Base...
Loading AEC Base GUI...
Loading AEC Project UI...
Loading AEC Utilities...
Loading AEC Layer Manager...
[code]....
Civil 3D appears to run o.k., no error messages upon opening a drawing...
View 3 Replies
View Related
Jan 23, 2010
I am using Corel Graphic Suite X3. I created one file of 330 MB. It contains text and images....
But now when i am opening this file it say "File contains Invalid Object" "IGNORE:ABORT:RETRY"..I chose every option but nothing seems to happen and corel draw gets hanged..I tried importing it..also i tried re installing it but nothing seem to work...
this file is very imp and i have to open it...Wht to do? Also any future precautions, if any?
And am i using the right version? Im mean is is because this is the lower version and i need 2 upgrade?
View 11 Replies
View Related
Jun 4, 2008
I have use the Photoshop CS and i appear error when i open it
it prompt up a alert box and said'Could not complete your request because of missing or invalid personalization information'
i try to uninstall it and reinstall it, but it still appear.
View 9 Replies
View Related
Jan 12, 2014
Is it possible to create subassembly from C3D Stock Subassemblies.dll programmatically using .NET? I need call procedure (Basic Lane for example), set all input parameters and create subassembly in drawing.
View 7 Replies
View Related
May 10, 2011
We recently switched to 64-bit ACAD on dell M6500 laptops. I used to use dynamic input all the time, but after the switch I noticed when using Dynamic input turned on, when you go to draw a LINE, after you pick the first point, the mouse "lags" and becomes "glitchy". I had the problem "fixed" once by our IT guy, he updated the driver or something and everything was fine.
But now it is doing it again.
View 4 Replies
View Related
Jul 4, 2013
I would like to automate drawing process for certain data. Using some LISP codes User will be asked to provide some data and using that data an automatic drawing needed to be developed at Drawing editor of AutoCAD. For example;
Enter the width of Sheet: 50 mm
enter the length of Sheet: 200 mm
Enter the sheet thickness: 5mm
Enter type of feed: Automatic
Are there holes in Strip: Yes/No
Specify nu of holes: 5
Position of holes Centre: 5,5
Distance between the holes: At an interval of 20mm each
I just need a LISP code for such program.
View 9 Replies
View Related
Nov 20, 2012
Background: We have a correctly functioning installation of Win XP, and PS CS3 Extended which appears to work normally in every other regard. No obvious errors; no crashes, no start-up complaints; nothing seemingly out of order. I use several installed languages in Windows (Eng UK, Russian, Swedish, etc). All of these work normally. All of my installed fonts work correctly in every application on the system except for CS3.
There would appear to be something wrong with CS3's keyboard mapping in foreign languages. When typing with a non-English keyboard setting (any other language) and using True Type fonts (not Open), only 'missing character' boxes appear in the artwork. The Layers menu displays the typed text correctly, but this will not appear in the artwork. If I use an old install of PS7, I can type using these same fonts correctly in any language. These layers can be imported into CS3, and these WILL display correctly on the artwork. However, the Layers menu in this case displays nonsensical characters. Ergo, I suspect that CS3's keyboard input data is errant.
Where does PS3 keep its information regarding language / keyboard layout? It is possible to edit this file(s)?
View 2 Replies
View Related
Jan 30, 2013
Currently have an iLogic rule in my drawing template that base on user input brings up the Drawing View dialog box (as though you click on base view). I want to know if there is some coding I can do to control or handle what happens if the user clicks the cancel command inside this dialog box. Possibly show a message box. Or even run another rule after the cancel button has been clicked?
View 1 Replies
View Related
