Is there any way to resize the gizmo within the bend modifier so that I can change the bend to a different radius? Or is the bend radius dependent on the size of the piece its bending?
Windows 7
AMD A-6
4 GB Ram
I have been trying to bend a larger radius on a corner bend but i can not seem to be able to . I start out with a face of 46" x 82" i want to put a 1/2" bend up then a 1/2" bend out to make a z shape i'm using as a material .109 stainless steel and i want to end up with a 1/2" on the inside corners so that when i'm done i can flatten it out to get the proper sheer size for the piece the metal brake i'm using has a 1/2" die in thats why i trying to figure this out is their any way to put this kind of radius on the sheet metal bends.
View 2 Replies View RelatedIs there a way to preload information into Inventor in regards to the break press such as the dies being used or the ones available so the when the computer is deciding a bending radius,it know what tool we have?
Currently the bend radius is set to "radius", which i am assuming is default, but I can't figure out how to change that either, and depending on the thickness it will change, but like today it said I would need a 1/16th inch radius, but we don't have a 1/16th inch die,it is an 85 degree air bending setup,and has a 4 way die with smaller and bigger openings.
I have a large number of parts that are set with a "2mm" Bend Radius.
1. I wish to change it to "1.5mm" but manually takes time . Ways to automatize this?
2. What Bend Radius is recommended to be used for steel sheets (1.5 ; 2; 4; 5 mm).
I wrote an app some time ago that swaps out user parameters that drive sheet metal thickness and bend radius.
it appears to work about 60% of the time when it doesn't it does not give any warning but even though the FX table shows the new user parameters driving thickness and bend radius the "sheet metal defaults dialog" thickness input box is grayed out and shows no value what so ever. Clicking the Edit Sheet metal rule to display the "Style and Standard Edtior" the Thickness and Bendradius still show the Old userparameters. See attached Pic.
I am setting the parameters as follows.
Replaced "Chan_Th" with "chn_thk" in FX Userparameters
then...
[Code]
oSheetMetalCompDef.UseSheetMetalStyleMaterial = True oSheetMetalCompDef.ActiveSheetMetalStyle.Thickness = sThick
[/Code]
As you can see FX reports the change but sheet metal settings does not.
This code appears to work or not at random.
The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View RelatedI have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box.
I'm sure I've done this before and this hasn't happened?
It has come to my attention that the new drag-resize feature only changes the master diameter of the brush but leaves the dual-brush diameter intact. It is the only shortcut that does this resizing improperly.
I would like to know if everyone else experiences the same problem. Is it a bug or is this way of resizing intended?
I mainly do digital paintings and this small bug makes the feature useless for me. I hope that it will be fixed at least in cs5.
In previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
Is it possible to bed a rectangle in Photoshop 7.0?
I have searched and searched the internet but got nowhere.
Any ideas?
I drew up a piece of paper with a slight bend to it. The text should go over top as if it's written on the paper. The problem is, I need the text to bend along with the curve on the bottom left of the page as it gets closer.
View 2 Replies View RelatedHow would I go about distorting an image to match the bends of a page in a book?
I'd like to be able to make an image match the page on the left side of the book,
Is there any way I can bend a 2D object? I have a drawing of a hydraulic hose running straight in the x axis. What I want to do is to be able is to bend the hose around 90 degress (to fit in a case) without altering the overall length & width. I have attached a simple drawing that should explain the problem. I know the lengths don't match, this is purely for illustration
View 9 Replies View RelatedI have a picture of a pretty line (DNA if ur science-y) on a black background and I need this to bend halfway through the image so the line makes a curve with an almost 60' angle. You can just grab the corners of the image and move them where ever... nooo... u can't.
View 1 Replies View RelatedI'm trying to use the cut across bend feature on a sheet metal part. However, when I check cut across bend, it grays out all of the other cutout options, and only has thickness as the only option. This is perplexing to me, because I can't think of too many times I'd need this option other than when there is more than one thickness of material I need to manipulate the profile onto.
I was to understand that this "cut across bend" is for use similar to the "normal cutout" command in solid edge? Keeps the cut perpendicular to the sheet face in a sheet metal part.
Cybertron PC
Intel Core i5-3470 CPU @ 3.20 GHz 3.60 GHz
16.0 GB RAM
Windows 7 Professional 64 Bit
3D Connexion Space Pilot
Inventor Professional 2014
Autocad Mechanical 2014
I attached an IPT file that a customer sent us to manufacture for them.It's a rectangular aluminum tube with two bends.In the IDW when I try to place center points and dimension the radius it is not recognized.The original file was a STEP.
View 9 Replies View RelatedI've recently learned how to bend a brush along a path in illustrator, but would love to be able to do the same in photoshop. Is it possible, and if so how?
View 3 Replies View Relatedi have a graphic of a zebra stripe, a long rectangle with the various stripes going vertically down in various shapes and sizes. I need to "bend" it into a circle. I tried just creating a pattern out of it and filling a circle selection with it but it's not evenly bent because of the way it fills.
View 1 Replies View Relatedhow to bend an rectangular image into a semicircle?? i.e. creating a clock face type image.
I am using photoshop CS (8)....Windows version
bending text around the outside of a circle. The arc command under warp text doesnt quite arc it as much as I want it to. Is there another way to arc/bend text?
View 9 Replies View RelatedUnder the modify tab in a part file, I can drop down and click "bend part." We have a bunch of frames made out of stock tubing that are welded together, then bent as a whole. Is there a way to bend at the assembly? I want the model to represent the production process. I don't want to have to bend each tube alone, then reassemble. That would double my parts/part numbers.
View 9 Replies View RelatedI'd like to use the bend modifier to transform a square plane into a sphere with a diameter equal to the side length of the original plane (to reproduce the approach for UV mapping a sphere described here).
I've been able to bend a vertical, square plane into something very close to a sphere using two bend modifiers (the first bending the x axis by 180 degrees with a direction of 0 degrees and the second bending the y axis by 360 degrees with a direction of 90 degrees). It's necessary to move the center of the second bend modifier to obtain a sphere.
However, there are two problems with the result: the diameter of the sphere is not equal to the side length of the initial plane and it's difficult to position the center of the second bend modifier such that the sphere doesn't have holes at its poles.
The first problem occurs because (as far as I can tell) the bend modifier assigns its gizmo an initial scaling such that the object to which the bend modifier is being applyed is bent but not stretched. This is reasonable default behaviour and applying an FFD 2x2x2 modifier after the first bend modifier allows the (now bent) plane to be scaled such that the height of the sphere that ultimately results equals the side length of the initial plane. However, when the second bend modifier is applied, there doesn't seem to be an easy way to precisely position its center such that the sphere's width equals its height (the next step would be to weld the vertices at the two poles). This is also the cause of the second problem since positioning the bend modifier's center correctly would also remove the holes at the poles.I've attached a max file (in a zip file) for reference (also see the left-to-right sequence in the image below):
- Plane001 is the initial square plane
- Plane002 is after the first bend modifier has been applied
- Plane003 is after adjustments have been made with the FFD modifier
- Plane004 is after the second bend modifier has been applied
- Plane005 is after the center of the second bend modifier has been adjusted.
I am having a trouble when a try to bend a "Editable Mesh" element. I need to bend the "Peca1" and it need to looks like the "Peca2" (booth in attachment or in skydrive [URL]......
View 5 Replies View RelatedI have a simple character with two a leg. The IK chain goes from the top bone to the bottom nub. When I move the ik helper around, the knee does not bend, even though there is a joint for it. Instead the leg rotates only at the top.
Example:
Should happen: (notice bend in knee)
____
/
/
/
What happens:
/
/
/
/
/
/
The bones are all connected correctly as well.
I am using autocad 2d from last 5 years. i want to draw a rectangular bend at a given elevation as shown in enclosed sketch. How to draw the same.
View 1 Replies View RelatedI draw ventilation ductwork all day at work, just recently stumbled across dynamic blocks.
Attached is what i have done so far, the straight section works perfectly, just having some trouble with the radius bend. What I need is for the arc to stretch with the angle of the bend.
TEST.dwg
I am trying to make a exaust pipe for a semi i am making in autocad 2006 and the pipe bends at the top. so i was wondering how can i bend a 3d cylinder/pipe?
View 9 Replies View RelatedI want to sort of bend an image around another e.g. straight vines manipulated to warp around pipes.
View 2 Replies View RelatedUsing AI 6.
I took this picture, what I want to do. I have some poker card vectors I made. I want to be able to bend them like this picture.How to do this?
A method to bend a linear 3D extruded object in Z space? I'm wanting to bend an object such as this (created in Photoshop CS6):
Into an object such as this (achieved in a dedicated 3D application), but I want to be able to do it in Photoshop.
I'm working in on a dike alignment that has a 90° bend and the contours are following the side slope to existing grade and then goes back to center top of new grade of dike at the bend.
So the contours shows a dip in plan view. So the center of dike alignment doesn't follow top of new grade. Is there something I can use to the contours follow the alignment correctly instead of a dip?