Photoshop :: Page Bend
Apr 8, 2007How would I go about distorting an image to match the bends of a page in a book?
I'd like to be able to make an image match the page on the left side of the book,
ADVERTISEMENT
GIMP :: Make Open Book Page - How To Bend Image
Aug 7, 2012I'm trying to compose an image of an open book. I want to place an image I have into the book [URL]
So, I want to know how I could "bend" the image so that it lays on the curved page of the book properly, appearing as if it is part of the page itself.
Photoshop :: How Do I Do A Page Curl BUT With The Edging And Texture Of The Page?
Aug 30, 2005I have found loads of tutorials showing how to do this with a normal single tone page but I am having trouble getting the curl to work well on the bottom right hand corner with the texture and also the torn edge. I have tried distorting it but it just goes all blurred.
View 3 Replies View RelatedPhotoshop :: Bend Shape
Dec 6, 2004Is it possible to bed a rectangle in Photoshop 7.0?
I have searched and searched the internet but got nowhere.
Any ideas?
Photoshop :: Text Bend
May 3, 2007I drew up a piece of paper with a slight bend to it. The text should go over top as if it's written on the paper. The problem is, I need the text to bend along with the curve on the bottom left of the page as it gets closer.
View 2 Replies View RelatedPhotoshop :: How Do I Bend A Brush Along A Path?
May 30, 2008I've recently learned how to bend a brush along a path in illustrator, but would love to be able to do the same in photoshop. Is it possible, and if so how?
View 3 Replies View RelatedPhotoshop :: Bend A Straight Graphic
Nov 2, 2006i have a graphic of a zebra stripe, a long rectangle with the various stripes going vertically down in various shapes and sizes. I need to "bend" it into a circle. I tried just creating a pattern out of it and filling a circle selection with it but it's not evenly bent because of the way it fills.
View 1 Replies View RelatedPhotoshop :: How To Bend An Image Into A Semicircle
Jul 12, 2005how to bend an rectangular image into a semicircle?? i.e. creating a clock face type image.
I am using photoshop CS (8)....Windows version
Photoshop :: Warp/bend Text
Feb 26, 2007bending text around the outside of a circle. The arc command under warp text doesnt quite arc it as much as I want it to. Is there another way to arc/bend text?
View 9 Replies View RelatedPhotoshop :: How To Bend A Linear Extruded 3D Object In CS6
Dec 30, 2012A method to bend a linear 3D extruded object in Z space? I'm wanting to bend an object such as this (created in Photoshop CS6):
Into an object such as this (achieved in a dedicated 3D application), but I want to be able to do it in Photoshop.
Photoshop :: How To Evenly Bend Streight Lines.
Apr 13, 2006You know how you can create a streight line with the line tool, well is there a way to start to bend it as you wish. For example to get a symetrical ) type curve.
View 4 Replies View RelatedPhotoshop :: How Do You Bend A Straight Line (path)?
Sep 3, 2007I want to bend a line in photoshop. I create a path with the line tool, but then what? If I add an anchor point, it creates a new line that closes the shape.. I can position that line over the bend line, but i can be done more simple I recon..
View 2 Replies View RelatedPhotoshop Elements :: How To Turn Off Project Bend
Jul 8, 2013Everytime I switch to "Quick Edit", it turns on "project bend". I turn it off, but each time I switch back to "Quick" its back on?
View 1 Replies View RelatedAutoCad :: Remove Model Page Setup Entry From List Of Page Setups
Feb 1, 2012Using Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
CorelDRAW Graphics Suite X5 :: Change Ruler Scale Per Page In Multi-page Document?
Oct 16, 2010I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
CorelDRAW Graphics Suite X5 :: Print Merge Documents - Many To One Relationships To Flow From Page To Page
Feb 10, 2013Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
GIMP :: PDF (single Page Doc) Convert To Page Sized PNG With Quality Good Enough To Read Text
Jan 28, 2012Several times a week I need to take a PDF (single-page doc), then convertto a page-sized PNG with quality good enough to read the text (and atransparent border), and then convert to a SWF. I have a PNG-to-SWFutility, but when I used it on the PNG saved after I opened my PDF andexported from GIMP, the end result was not good enough. A co-worker saidGIMP couldn't make a PNG (w/transparency) with enough quality. He said we'dhave to use some other software. Part of the issue was not being able toresize without losing quality before the PNG export. True or false?
View 3 Replies View RelatedInDesign :: Moving A Page In Document The Master Page Elements No Longer Display On Screen Or In Print
Mar 14, 2014After moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies View RelatedInDesign :: Setup Datamerge File To Create Multi Page Spread Documents With Fields On Different Page
Apr 1, 2014Trying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
CorelDRAW X6 :: Copy / Paste Artistic Text From Page To Page
Mar 30, 2012If it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
AutoCAD 2013 :: Change Page Setup For More Than 1 Page At A Time?
May 6, 2013I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View RelatedIllustrator :: Save Page-tiled Document As Multi-page PDF In CS6?
Apr 4, 2013This was very easy to do in earlier versions of Illustrator, but now it seems like the only option is to make a separate artboard for each page tile!
View 1 Replies View RelatedIllustrator Scripting :: Getting Page Count For A Multi-Page PDF File?
Jun 25, 2009how to get the page count of a multi page PDF file? I know you can then open each page using the PDFFileOptions (pagetoopen). But I need to know up front how many pages there are to loop thru to open each page and process each page.
View 8 Replies View RelatedInDesign :: Master Page Items Shift After Page Insertion?
Mar 4, 2014Indesign CS6: I've years of extensive experience using Master Pages. Now, however, when I insert a single page in a facing page document, the headers shift off the page. I've tried everything I can think of to stop this. I'm not using liquid layout or any of those layout things.
This is very problematic as I do textbooks with hundreds of graphics and I either have to manually move all the master page items on every page after an insertion; or I have to shift all graphics manually to the next page after moving those to the next page, and the next, and so on.
I'm praying this is just a "hey, you must have X set to X and by deselecting it you'll be fine."
Photoshop :: Bending A Line Of Straight Bricks Around A Bend
Sep 29, 2005I'm working on some renderings for homes, and I need to plase some bricks over an arch on a window. I've got a pic of bricks all lined up, but they are straight, and I need them to bend around a curve.
View 8 Replies View RelatedCorelDRAW X6 :: How To Move Any Object From Far On The Page To The Page Border
Sep 9, 2013Untitled-1.jpg
i often do a very big and complex mix of logos names and so on.
i´d like to know if ther is any hotkey on how to move any object or a group of objects from far on the page to the page border.
Illustrator :: Second Page Of Two-page PDFs Printing Upside-down?
May 8, 2013In the past two days, two-page PDFs that I save out of CS6 are printing with the second page upside down. I have tried resaving the documents—didn't work. Tried saving the documents as individual PDFs and combining the PDFs in Acrobat—didn't work. I have had my colleagues print them, and the second page is upside-down too. When I print two-page PDFs that I saved last week or longer ago, I have no problem at all. It just seems to be happening with recently saved PDFs. I didn't update any software on my computer between saving the PDFs that are printing correctly and when this problem began.
View 11 Replies View RelatedXara :: Propagating Object Changes From One Page To Every Other Page?
Jan 16, 2011Does Xara Designer support the ability to change one object on for example page 1, and that the change propagates to all the same objects on all other pages? I'm doing a lot of web design work, so this would be quite handy, but I haven't found a way to do that.
View 2 Replies View RelatedLightroom :: 5 - Flow Text From Page To Page?
Aug 5, 2013A little + sign appears at the bottom right corner of a text cell when the text overflows. I find I cannot pick up the additional text by clicking the + sign to place it on the next text cell thus linking text from page to page. Am I missing something or is such a useful facility unavailable in Lightroom? If that's the case, is there a good reason for Lightroom not offering text linking between pages?
View 2 Replies View RelatedInDesign :: Add Page Numbers To 200 Page Document?
Feb 4, 2014I'm attempting to add page numbers to a 200 page document with no success. How do I add page numbers? This should be a simple process.
View 1 Replies View Related3ds Max :: Resize Bend Radius?
May 20, 2013Is there any way to resize the gizmo within the bend modifier so that I can change the bend to a different radius? Or is the bend radius dependent on the size of the piece its bending?
Windows 7
AMD A-6
4 GB Ram