Not able to change the units of tap drill and depth in .idw.
My part is in inch and the style too, is it a bug or a setting? I don't know...
Even if I change the style, custom of default, always the same.
When setting up a new project, I'm unable to change the bit depth for the project. It's set to 8-bit and ghosted. The graphics render button has a selector but when clicked it doesn't bring up the drop down.
My guess is that it has something to do with my hardware configuration (read: I need to upgrade my GPU) .
I created an idw and annotated all the dimensions in default to inches. Is it possible to switch all of the units from inches to mm at one time? If so, how?
View 2 Replies View RelatedMy drawing template title block has a section for estimated weight. This value and overall size is used to determine shipping methods of our products. This value is pulled from the Type->Physical Properties-Model and Property->MASS. There is no option to turn off units. When our clients look at the drawing, they often get confused with lbmass unit. example; When someone asks what the weight of the product is, we dont say it is 1300 pound mass, we say it is 1300 pounds. I have looked around all different forums and found no complete answer or solution to this.
The only thing closest to a solution that I found on this forum is to create a rule that creates a custom iproperty within the model. [URL]........
You then have to create a text field in your title block that populates from that custom iproperty but can only be done when a base view is inserted from a model that has the custom iproperty rule applied.
From what I have tried, you can create a .ipt template to save you from creating that rule to create a custom iproperty each and every time, but to populate the title block field, a user needs to create that text field and draw from that custom iproperty once the base view is set on the drawing.
I also found a way to incorporate mass without units but the information will be put into the parts list. So instead of the weight being "automatically" entered into the title block after inserting base view, I could create a parts list for every drawing. (Not a good solution) [URL].........
One last solution that I found, is there used to be a tool called iProperty Collection[URL]....... that gave users the ability to customize some Inventor functions. One being the ability to change the unit displayed for MASS. I haven't tried using this tool because the last update off the website stated in 2009; says the software is not compatible with Inventor 2009 64bit, since I am using Inventor 2012 64bit, I think this is a dead end.
how can I change Von mises units, MPa ( Default) to another one?
View 3 Replies View RelatedI am after a rule to change the unit type of all .ipts from cm to mm.
This has to go down to all levels in hierarchy but only change .ipt files
Is it possible to change the units of measure in the iProperties from lbmass to tons for instance? I deal with very large, heavy concrete objects and tons is the way we show mass. Also use cubic yards instead of cubic inches.
View 7 Replies View RelatedI am creating a custom table in a .idw through VB. I was looking for the code that would tell it to make a column have units formattng. For example, instead of my thickness to be 0.5, I want it to show 1/2 in. I know you can do this manually in the table editor, but I cannot find any bits of code that will do it in VB automatically.
View 1 Replies View RelatedSee attachment. I can't get the units off of inch.
View 1 Replies View RelatedHow do I change the document units using iLogic rules.
View 3 Replies View RelatedWhenever I start a new part, I have to change the units in 5-6 clicks to metrics. And next time I have to do the same all over again.
Is there a way to do this permanently?
how to change default units to metric for inventor2013? Now I have them set as imperial.
View 3 Replies View RelatedHow to change the units to metric in material editor? See attached picture
View 1 Replies View RelatedI am drawing an adjustable drill stop. I have basically chamfered a cylinder to create a point. I know what the sweep profile looks like, I just cannot seem to angle the plane to be tangent with the chamfer.
IV2011 Professional 32-Bit
Within an IDW file, you can go to the Styles Editor, then click on a standard. On the General tab, there's a drop down for the unit of length.
Provide the code so that I can change this setting from Inches to mm with an iLogic rule?
I am struggling to drill holes at an angle on shaft in assembly level. I cant drill at part stage as forging called up in assembly.
View 4 Replies View RelatedThe "tap drill" option in hole note in idw drawing is gray out. so I was playing around with it and fix the problem luckily.
I go to hole feature model and change thread class from 2B to 3B. then, the "tap drill" option is turn on in idw drawing.
is this correct way to do it? i have few drawing to fix it. is there a faster way?
inventor 2013 sp2 and window 7
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
I want to make a new function in my own add-in to drill holes in cupboard panels for a dowel connection.
I used to make holes in other "own" functions where the user selects the faces.
In this function the user must select 2 parts in an assembly and then find the adjacent (planar) faces. I need this faces to make the sketch for the holes.
How to find these adjacent faces?
I want to make a subassembly in SAC 2013 to change the slope after require depth,see attached example.
View 5 Replies View RelatedI have about 100 manhole structures with a 0.5' sump. I want them all to 0.0'. Is there a way to change the sump on more than one structure at a time?
The only way I have found to change the sump depth is one at a time through the structure properties.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
is there a way to change units, lets say i am making a wall with a unit of meters and suddenly i want to make a sofa with a unit of inches or a bed with a unit of feet.. is there a way to do this?
even if i change the units of the FORMAT tab, it stays the same...
In my autocad i draw in mm, how can i draw in m?
View 4 Replies View RelatedAll the values I put in to set my tolerance are being rounded to three decimal places even though the value is four place and I am setting the dimension precision to four place.
For Example: I have a hole of diameter 2.0466. It is to have a tolerance of +.0005/-.0000. When tolerance.setToDeviation is called, the .0005 is strangely forced to .001 and is set as this in the part file. The precision value had already been set to 4 at this point.
I am using the following code in Inventor 2010:
'Create hole feature
Call oCompDef.Features.HoleFeatures.AddDrilledByThroughAllExtent(oLinearPlacementDef, dDiameter, kExtentDirection)
'Get hole feature just created
Dim oHole As HoleFeature
Set oHole = oCompDef.Features.HoleFeatures.Item(oCompDef.Features.HoleFeatures.Count) ' need most recent index
[code]...
In the Autodesk Inventor drawing (.idw) I am unable to change the font size when i dimension a hole and thread. I have tried going into "Edit Hole Note" and "Text" when you right click on the dimension.
View 3 Replies View RelatedI have been trying to draw in mm, i.e, when i draw a line 1000 i want it to be 1000 mm. but currently when i do that i'm getting a line way too long, cant even zoom out to see it fully. i can only draw shorter lines (ex. 30) to be able to see it fully.
View 2 Replies View RelatedI got a unitless model! So, I changed it to Inches (Format/ Units). However, it does sound like nothing has been changed!
View 9 Replies View RelatedWhen opening photos through Bridge into Photoshop CS5, all photos open in 8 bit mode. Bridge shows my photos in 16 bit Mode. How can I change the default settings in Photoshop CS5 to open into 16 bit Image Mode?
View 2 Replies View RelatedI cannot change the leader text position to be aligned next to the leader line, the text is positioned offset from the line, how do I correct this .
See attached image.
I'm using sendcommand to draw various shapes in autocad.
the problem is my application (wpf) uses pixel units while autocad uses inches by default.
how can I change autocad units to pixel programmatically?
I have revived an old project that was started about 2 years ago. I went to attach my title block in paper space and the drawing was itty bitty.
Seemed unusual because in another layout the title block is there with the same page setups etc.
Then I looked at the block units and they were set to mm. Can it be changed? If so how? Or am I completely hooped?
ACA2011
Win7 64
I have a query on the units for Autocad, every time i start Autocad up it defaults to inches, i have to change the units manually to mm using in units. is there a way to set this that i don't have to keep doing this?
View 2 Replies View Related