issue regarding attributed text updating when reinserting a DB. I have text override in a dimension, inserted a field into the text override but whenever I reinsert the block and change the values, the text does not update.
View 5 Replies
I am currently using AutoCAD 2011 but there is a couple in our office using 2012. When they open a drawing with attributed text it shifts the text, usually to the right. The text height stays the same as well as the vertical position. It appears the text letter spacing (kerning I think it is called) is adjusted to be closer and it shifts to the right. If I click on the text and then click on the grip for the text twice it puts it back to what it is suppose to be or was. This doesn't happen in any logical order it is random through out the drawings, making it harder to find and fix them all. I can save the file close it, re-open it and the text shift happens again, randomly.
We have only noticed this on drawings that have been opened with 2012. Is that a problem with 2012? Is there a fix for it? I found while GTS that someone clicked on the annotate>annotation scaling>sync scale positions so I tried that and it didn't adjust the text/attributes back to where they are suppose to be/where. The shift happens as stated while re-opening a drawing, also when doing a regen, I also noticed it happening while doing a simple copy/paste of a part that isn't shifting. I hope this makes sense as to what is happening, I would post a drawing but they REALLY frown on us "sharing" our drawings.
I have a dynamic block with attributed text that I want to remain horizontal right reading even when the block is rotated. I have set up the parameters and the actions how I was taught and even revisited one of AU's downloadable lessons to try to get it correct. my settings are the same as in the lesson. I have the rotate parameter / action set to only the geometry and did not select the attributed text. I also have the attribute locked. Nothing I do gets the text to rotate with the block and stay horizontal and right reading. It will either rotate the text along with the block or just leave the text stationary. I have tried adding a point parameter to the text but that doesn't seem to work either. I am using Base ACAD 2010 I have also attached the block for troubleshooting.
View 2 Replies View RelatedIs there a way to change the text styles, lets say from "Standard" to "Romans", all at once within an attributed block, or do you have to update each tag attribute individually?
View 2 Replies View RelatedThis is the command line responce I get when i attempt to enter text. All teh numeric expressions of all my dimensions have been replaced with a backslash. Along with all text including infomation on the attributed title block.
I have exhausted my options for figuring it out, do I need to reload the program? is there a restore default option? ( I haven't found one yet) I am running 2011 LT
I am creating a border and making it attributed. I have the drawing number showing up in the title block and in the opposite corner of the page. I want to link the two somehow so that when one is edited the other automatically changes to match. Is this possible to do?
View 6 Replies View RelatedIs is possible to have an attributed block in a marker style or note style? I would like to have editable text upon insertion of the marker or text? I have tried unsuccessfully to get it to work. Does the fact that C3D displays the marker and note as objects prevent it from being editable? Is there a workaround?
View 1 Replies View RelatedI am trying to speed up some basic drafting of text revisions. In the P (plumbing) we call out the fixture units for a water pipe, along with the fixture units, the pipe size changes.
Is there any way to add numbers in an attributed block? (I have a lisp that works on text & mtext, but not attributes)
1.1. Example: Like if you have a block with two attributed text fields, the 1st field {x} is a number (fixture unit), and the 2nd field {y} is a number (pipe size). I would want it to only add the 1st text fields. [If possible then change the 2nd text field according to a changeable chart. (see #2)]
1.1.1. This is how the block looks like: x (y")
1.1.1.1. x could be any number from 0.5 – 10,000 (only using 1 decimal place, and only as needed)
1.1.1.2. y could be any number from the following list: ½, ¾, 1, 1¼, 1½, 2, 2½, 3, 3½, 4, 5, 6
Is there a way like in excel that you can set up a formula that will give a numerical result depending on other input? Like pipe size that change depending on the number of fixtures. There would need to be two different formula, one for hot and one for cold values (The value would be set at the beginning of the job; typically these values would not change later in the job). This could be separate text or if possible using the attributed block as described in #1.
2.1. Example: Like if you have a block with two attributed text fields, the 1st field {x} is a number (fixture unit), and the 2nd field {y} is a number (pipe size). I would want it to change the 2nd text fields according to the value in the 1st text field. If the value in {x} is 0.5 – 1.0, it would result in ½; 1.5 – 7.0 = ¾; 7.5 - 17 = 1; 17.5 – 36 = 1¼; ect.
2.2. In excel it would be =IF(x)<1,"1/2",IF(x)<7,"3/4”,IF(x)<17,"1",…{all #’s in between} …IF(x)>5000,"6")))))
I accidentally deleted the major and minor station labels along my alignment. Is there a way to re-insert them?
View 5 Replies View Relatedcreating a lisp or pulldown with some standard features in it.
what i would like to do is be able to quickly insert a template (layers/linetypes/colours etc) which is the same used in our initial drawing. I'm a big fan of constantly purging and auditing my drawings to keep them clean and in a previous workplace we had the ability to reinsert all the default layering.
Long ago, everything was done in Imperial and now we are converting to Metric, the issue is that the drawings we have no schedule of members and we (a colleague and I) are constantly discovering new members, this is causing no end of trouble with our numbering system.
What we would like to do is set up a master-table with 5 categories (UB, UC, PFC, EA and UA) and then have the labels for all the members dependent on this table. If we were to change the value in the table, the label would automatically update. Is this at all possible? I looked into the Xref and RText commands and they seem close but not quite there. Ideally the table would be in a separate dwg so we can work on drawings at the same time.
I've got some Text Layers in my CS6 document.
In CS5, if I had Text Layers and changed the text on the layer (by double-clicking the "T" icon of the specific Layer in the Layers palette), the name of the Layer would change to reflect the new text I entered.
For some reason this behavior is gone in CS6. So, for example:
• I have a Text Layer with the word "Email" on my canvas. The Text Layer name also reads "Email".
• I double-click the "T" icon of the Email Layer to edit the text on canvas.
• I enter new text, "Contact". The text on canvas updates to "Contact", but the Layer Name remains "Email".
So, for accurate Layer names, I find myself having to change the text twice: once on the canvas, and then manually updating the Layer name as well. Is there an option or preference somewhere that I'm missing that would re-enable the behavior from CS5?
I have around 700 pieces of dtext that all need to have their values raised by 10 is there any easy way of doing this?
View 3 Replies View RelatedI have multiple of the same drawings. The drawing will stay the same but the device names will be different for each drawing. Is there a way to have a excel lookup table for each device and each drawing can reference to ?
View 1 Replies View RelatedI have some sample lines that highlight utilities needing a section view. I've now moved my sample line to highlight the true cross section stationing for these crossings. Why doesn't the station value update for the sample line once this is moved. For some reason I remember the station text on the sample line updating itself automatically in the past.
View 2 Replies View RelatedI am using Mech 2007. I have created a template to use with new drawings, and want to know if there is a way to update all the drawings at the same time when updating the template.
View 3 Replies View RelatedI extracted a dynamic feature line from the gutter flowline of my Corridor. I labeled Multiple Segments for the feature line with a grade and vertex style that uses the "General Segment Grade" text component.
I am overiding lane cross slopes in the Section Editior and the segment grade labels for the extracted feature line do not update after I Update Corridor in the Section Editior.
If I raise/lower the CL profile of the corridor, the label updates. Just not reacting to these Corridor edits.
Peculiar behavior: The label will update to reflect the Corridor update if I Isolate it.
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
I am trying to get DText objects to update width factor when I change the Width Factor of the Text Style. We have one style (Simplex) & I hoped to be able to set the width factor of that style to 0.8 or 1.2 depending on what is required and then just insert objects from the tool palette so they have the correct width factor.
This seems to work for MText but not for DText or Attributes. Short of using lisp is there a to update the width factor of DText & Attributes? (hoping to be able to do this on LT also)
Only way I can see for DText is to qselect text and change style to something else and back to Simplex. Only way for attributes I've found is to advance edit block and change text style to something else and back.
AutoCad 2013 & LT 2013
I am using ACA 2009 and am experiencing something new with attributed blocks. When I insert the block, a copy of the block is placed at what seems to be an arbitrary distance away. As I fill in the boxes for each attribute, it appears in the image away from the insertion point. After I am done, the completed block appears filled out where it was inserted. I have never seen this before. Is there a setting affecting this?
View 2 Replies View RelatedBasically I have a rectangle and want to change the dimensions of it. There are a couple of attributed definitions that I want to stretch the and change it length but I alsowant the attributed definitions to move with the right hand side of the rectangle and the stay a constant distance from the right hand side. Unfortunately when I use the stretch action it filters out the attributed from the object that I can stretch, any way to include these AD’s with the stretch action
View 3 Replies View RelatedI have recently been forced more to use customer supplied drawings in inventor that contain attributed AutoCAD blocks, I have been looking for a way to automate filling out these and add some consistency since they sometime ask for the same thing to be updated in several places. I have been using the "dwgblk.GetPromptTextValues(sTags, sAttr)" to get the values of these attributes but I don't know how to update the value from a property back into the attribute.
I have even thought about doing this in iLogic so that it would be easy to change from customer to customer.
what is the easiest wqy to extract information from an attrbuted block into a spreadsheet (excel)?
View 1 Replies View RelatedHow do you get a point marker that uses a block with attributes to show the attributed text?
We are using tree symbols that have the size of the tree as an attribute, but when the points that use that block come in...the block shows up w/out any attributed text. Tried to edit the "block" or point marker with attedit command, but C3D tells me it is not a block. Understand that it is a "marker" for the point. But, what is stopping the text size of tree from showing up?
I would like to extract a furniture schedule by using attributed blocks. I would like attributes like Item #, Color, Size, Location, Description, Manufacturer, etc…. The problem with the data extraction system that I am having is that in order for a chair with a tag to be considered the same chair and be counted correctly all the block attributes have to be exactly the same/ match.
For example, if I have the same chair (CH-01) but the location of the chair changes, cad treats it as 2 different chairs.
Is it possible to make a pull down inside of a attributed block?
For example: if I a have engineering code section of a title block and I want to be able to choose from a list of codes:
ASME A17.1-2004
ASME A17.1-2007
ASME A17.1-2010
ASME A17.1-2012
Can I set up the block to let me do that?
1) Problem about viewports :
I am using 2011, I have created 17 viewports in one paper space, there are 2 viewports not showing anything. I deleted 2 viewports with content, then the 2 viewports which were not showing is now showing images.
I started a new drawing, drew something very simple for testing, I could create 63 viewports the 64th is not showing.
I would like to ask what it is to control/affect the number of viewports I can create in one paper space.
2) To Edit an Attributed Block
When double click an attributed block (command = eattedit), the dialog box "Enhanced Attribute Editor" disappeared !
Using CS5 and Win7. I just noticed something with my text in CS5 which is different from CS3 and as far as I'm concerned, a step back.
I made a text layer with some words. The words appeared as the layer name in the layers palate (say I typed "TEXT" on the screen and the text layer was named text). Then I double clicked on the text icon and this selected the word on the screen. I then changed the word "TEXT" to some other word say "WORD". However, this new word I typed in was not carried over to the layer name so the old layer name remained.
In CS3, the layer name is updated when the words on the screen are changed. I'd really like to have the new text update on the layer name. Is there some way to fix this or is this just something in my system.
I am using CS2 on a XP64 machine. I am editing a .psd originally created in Photoshop 7 but saved under a different file name in CS2.When I open the file, a dialog box with this text appears: "Some text layers need to be updated before they can be used for vector output. Do you want to update these layers now?" The options are No and Update.Updating the layers changes all the text layers from font "Times New Roman" to "Radioactive", which I'm sure isn't a standard installed font. To avoid the problem in future edits, I saved the .psd under a different name through CS2 and then deleted all the offending text layers and recreated them using "Times New Roman" again. However, after saving the file and reopening it, I get the same problem as before. Should I perhaps delete the "Radioactive" font? I'd really rather not have to enter all the text in again.
View 5 Replies View RelatedI have the drawing I'm working on, who's scale is set to "unitless". I'm attempting to insert a series of attributed blocks (containing titleblock information) into the paperspace of my drawing. The attributed block is also set to unitless.
Two of these blocks require editing to suite the drawing, the other two are to be edited at a later date by a third party.
Everything HAD been working fine, however, it appears the wheels have fallen off ~ I'm now experiencing a periodic error where, I insert a block to the 0,0 at a scale of 1 (as per procedure) but the block comes in at a fraction of the correct scale. I have to scale the block up by 25.4. (The imperial / metric conversion.) (Note, I'm working in Metric)
Even stranger - its not happening on all blocks. Just the two that have to be edited "in house".
I've checked measureinit within the blocks and it is set to metric. I'm limited in my ability to purge / audit the drawings as they don't want template information deleted from the drawing - but I don't know what other system variables i should be looking at.
I'm using CivilCad 2012 with Windows 7,
Editing attributed blocks causes them to disappear from the screen. Edits include changing attribute values, moving attributes, or moving the entire block. The block is not gone, so saving and re-opening the drawing will display it again, but this is a terrible workaround when moving and editing many blocks in a large drawing.
We do not use annotative or dynamic blocks, so these are just good old-fashioned attributed blocks.This behaviour is being seen on both Windows 7 and older Windows XP systems with various hardware specs, and it is only in the 2013 product. We still have some stations running Map 2012 that do not experience this issue even when working in the same drawings.
I have an Illustrator document I created some time back, probably in CS4 (but could have been CS2). It shows a road map and has lots of road names that follow the path of the associated road. When I open this doc in Illustrator CS6 I am told that the legacy text must be updated before it can be edited.
If I open the file without updating the text then everything looks fine but if I choose to accept the offer to update all the text then my road names appear with irregular character spacing that looks very ugly.
How I can update the text to CS6 without messing up the appearance?
