AutoCAD Civil 3D :: Autodesk 360 Showing Up Out Of The Blue?
Dec 2, 2013I never used 360 sor put these project file in the cloud whay would I get this notification?
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
ADVERTISEMENT
Photoshop :: During Editing Blue Is Showing Up As Black
Jul 15, 2013While I am editing, blue is showing up as black...it renders in a JPG, PNG, PDF and prints with the correct color.
View 1 Replies View RelatedMaya :: Frame Showing In Blue Outline?
Apr 10, 2013I applied a painted texture to my character and now he has a blue mesh frame. How can I remove this frame?
View 4 Replies View RelatedGIMP :: Strange Blue Scribble Showing On Some XCF Files Opened
Sep 16, 2013OS: Windows XP
Gimp v 2.8
Not sure when this started happening since the last time I used Gimp was about a week or so ago and everything was fine at that point... Now when I open these ".xcf" files I've been working on in Gimp I see this strange Blue Scribble that is showing in the same location for pretty much all the xcf files I opened.
I went through every layer in the "Layers" window and made each one NOT visible in an attempt to see if it was something on one of the layers, but it remained there even after ALL layers were no Longer visible. I also created a new xcf file, saved it, then re-opened it in Gimp and NO scribble was there...
If I export one of the files showing the Blue Scribble into any other format and then re-opened it in Gimp the Blue Scribble is gone too.
Corel PHOTO-PAINT X6 :: Text Showing Up As Blue Dotted Line On Projects And Not Staying?
Mar 31, 2013My text was working fine til today, now when I try typing text, it is showing as a blank box, until I click outside of it, then it shows as a blue dotted line on the text. Then when I send it to the laser, it is not there!( laser engraver or the printer). I just want the text to be normal, like it was 2 days ago! Before, I could click anywhere, type, and it showed up with no problems!
View 7 Replies View RelatedAutoDesk Smoke :: Amplitude Turns Light Blue When Move Audio
Feb 4, 2013I'm trying to line up some audio with my cuts. I can see the the amplitude but as soon as I hold and move the audio it turns "light" blue. And I can can't see the waveform, which is useful a lot.
All I want to do is line up the cuts with the a back ground beat.
AutoCAD Inventor :: Autodesk Material Not Showing Correct Appearance
May 8, 2013Recently I have Installed Autodesk Inventor Proffessional 2013 SP 1.1 Update 2 on few new systems, it is not showing correct Material Appearance (Customised Material). I observed that it is not browsing images from correct folder location.
Following image showing error.
Older systms showing correct appearnace and it takes picture from following location shown in image.
I checked Application Options>File>Design Data (Styles, etc.) for new systems showing correct folder location i.e. From User>Public Documents.
System: Autodesk Inventor Proffesional 2013 SP 1.1 Update 2
AutoCAD Civil 3D :: Lines And Polylines - Blue Flag Flyout
Dec 11, 2012What is the blue flag flyout? I cannot move any lines or polylines without it moving whatever is attached. I do have service pack 1 installed.
View 7 Replies View RelatedAutoDesk Smoke :: FBX Scene Only Showing As One Node?
Mar 24, 2013I'm exporting a simple fbx scene making sure to use the 2010 fbx version but when i import it into smoke through the import node only one node shows in the action schematic which reads 'fbx scene'.
Also it isn't showing the mesh properly, more like bounding boxes...
AutoDesk Smoke :: Macbook Isn't Showing Up As Server In Localhost
Feb 18, 2013So I've installed Smoke for Mac 2013.2 on my macbook and everything has been working great up until a day ago. Now when I go to localhost/ backburner no servers show up. When I try to import something into smoke with cache media enabled, I get the error "Cannot connect to backburner manager 'localhost' on port 0" Also my Backburner Manager seems to be stopped in the service monitor and everytime I restart it, it shuts back off again.
What I've tried
Going through "mikes_backburner_guide.pdf" and a few others to get the networking right. Uninstalling and reinstalling smoke 2013 multiple times and restarting my computer many, many times.
AutoDesk Smoke :: Local Projects Not Showing Up In Startup List
Jun 5, 2013I have been learning smoke on various machines and different versions of the prereleases and service packs. I'm using SP2 now and II see older local projects listed in the media hub but they don't show up in the start-up screen listing of projects. how to regain access to these projects?
View 7 Replies View RelatedAutoDesk Smoke :: Blackmagic Site Showing Support For Ultrastudio
Apr 12, 2013Just noticed this at Blackmagic Design's web page for it's Ultrastudio line.It clearly shows Autodesk Smoke in the supported software! Something in the next release maybe?
View 2 Replies View RelatedPhotoshop :: Image Blue And White - Batch Command That Will Change Blue To Black
Aug 16, 2012i have 1000 eps files to work with and i dont have the time to go to each one and change the color from blue to black! all are different shapes so i need a batch command that will keep the white, white and change any other color to black!
View 1 Replies View RelatedPhotoshop Elements :: How To Make Blue Skies Less Turquoise And More Blue
Aug 8, 2013I'm using PSE 11 on a MacBook Pro. My Blue Skies have too much green in them for my preference. I'm sure there is a way to change this, but how? Also, can I change the default 'blue skies' to something more to my liking for a long-lasting remedy?
View 1 Replies View RelatedAutoCAD Civil 3D :: DWF Not Showing Objects
Nov 21, 2013When plotting to DWF my Civil Objects don't plot.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
AutoCAD Civil 3D :: Pipe Network Not Showing Up?
Apr 10, 2013I have lost the ability to create a pipe network in a single drawing. Sorta. I can create a pipe network, and label it, and see it in my toolspace, but it won't display it for any style in any format. I can bring in a data reference and label those, but can not see pipe or structure outlines or anything to that end. I have tried to recover, audit, purge. I am at the end, currently creating the pipe network, data referencing it in, and then just drawing lines between the labels.
View 9 Replies View RelatedAutoCAD Civil 3D :: Contour Labels Not Showing Up?
Dec 20, 2012Im working with 2013 Civil 3D. I have a site with polyline contours that have assigned elevations. I created my surface from the contours but when i try to label them with elevations, nothing. I label them by contour-mulitple with interval. All that is inserted are tic marks at the designated interval.
View 8 Replies View RelatedAutoCAD Civil 3D :: How To Suppress Showing Polylines
Jun 10, 2013How do you suppress viewing drawing polylines in the cross section editor in 2014. I never had this problem in 2013, now it shows all of my polylines in the cross section editor. I thought it would be under 'display objects'.
View 4 Replies View RelatedAutoCAD Civil 3D :: Contour Lines Not Showing
Jan 3, 2013We recently received a LiDAR data in the form of an .asc file. Brought it fine into Civil 3d.
However, the level data is in mm so levels are showing as 98450 instead of 98.45. The level ranges from 98450 to 166260.
When I create a surface and set the style to show contours, it only displays contour lines below 100,000. Is this a limit in Civil 3D or am I missing some setting somewhere? I'm using the UKIE template btw.
AutoCAD Civil 3D :: Sub-assembly Not Showing In Corridor?
Mar 25, 2013I have created a corridor of an exit ramp. Part way through the corridor, the left side slope isn't generated.
The subgrade doesn't exist. In the Sideslope to no side slope.png image that the corridor has a side slope and ditch at 10+600. Also in the 10+600.png image. But at 10+610 there is no side slope. There is OG surface out far enough, but it seems that in the 10+610.png image that there isn't enough OG surface. Orignally there was survey data missing in this area and it was added after the fact to the OG surface. Why doesn't the corridor recognize it, if that is the case. I have updated and syncronized the heck out of everything, but it still doesn't seem to work.
I should point out that this is in meters (the cross sections are 10m apart) and that it is the same Assembly being used for this area. Also all targets are consistant through this area as well.
AutoCAD Civil 3D :: TIN Triangles Showing Up On PDF - 2012 SP2.1
Aug 15, 2012Whenever I try to use the "DWG to PDF.pc3" driver, I'm getting TIN triangles in my PDF. They don't show up in the "Print Preview", just in the resulting PDF. They also don't show up if I print directly to a printer. Only in the PDF. Never saw this before installing SP2.1.
View 9 Replies View RelatedAutoCAD Civil 3D :: Xref Lines Are Not Showing
Jan 10, 2013I have x'ref a dwg. file in my current drawing. And when i print preview with the correct ctb style... The x'ref lines are not showing up?
I am having troubles showing the green, cyan and yellow color. when i print preview it doesnt show nothing. The true color is on RGB.
AutoCAD Civil 3D :: Does Not Showing Command Window
Mar 14, 2012it does not showing command window in civil in 3D 2011 after installing first time.How can i get it?
View 5 Replies View RelatedAutoCAD Civil 3D :: Templates Not Showing Up On Sections?
Jun 26, 2012How do i get templates which I have created, to show on the sections, when the sample lines were not drawn perpendicular to the alignment.
I am getting the template to show only at those sections which are perpendicular to the alignment.
AutoCAD Civil 3D :: Assembly Not Showing On Profile
Aug 1, 2013I can’t seem to manage to get the profile working, the assembly seems to look ok but it doesn’t show on the profile!
The assembly just follows the line of existing ground and does not show the height of the assembly (barrier). Also, if you take a quick section through the alignment/corridor it shows the assembly but doesn’t show it fully?
AutoCAD Civil 3D :: PDF Attachment Showing Bars?
Oct 7, 2013I've attached a PDF to my drawing and when I zoom in a bit it shows horizontal bars all over the PDF. The bars show up when printing as well. This is the first time it has ever happened to me.
My PDF Underlay contrast is set to 100, fade to 0, monochrome No, and Adjust colors for background Yes.
AutoCAD Civil 3D :: Subassembly Links Not Showing Up?
Mar 9, 2012I created a simple sub-assembly for a windfarm project but when I bring it into civils none of the links or points show up!
View 3 Replies View RelatedAutoCAD Civil 3D :: Surface Not Showing On Profile
Jan 23, 2013I have the profile of my pressure network and storm crossings converted into ellipses but I can't get my surface to show on the profile to show the amount of cover I have between the existing ground and top of pipe.
View 1 Replies View RelatedAutoCAD Civil 3D :: Showing Features In Profile Bands
Oct 29, 2012I'm currently making a profile view where i want my features/objects to be shown in the bands for chain age elevation etc.
I have fences footpaths & vegetation lines that i can show in my profile view by 'projecting objects to profile view', but i was wondering if I could show these in the bands instead as it would be more convenient.
From what i can see in my bands I can label at Major Stations, Minor Stations, Horizontal Geometry Point, Vertical Geometry Point, Station Equation & Incremental Distance.
I've attached a picture showing what it currently looks like.
[URL]...........
AutoCAD Civil 3D :: Showing North Arrow On Drawing?
May 23, 2012I would like to show a north arrow on my drawing, but i dont know where north is,
Does autocad know where it is, my site is in a very remote mountaineous area with nothing to reference off on goole earth or maps.
AutoCAD Civil 3D :: Surface Profiles Not Showing In XRef
Nov 2, 2012Existing surface profiles not showing in xref. Constantly have to reload xref for profile to show. Even on opening drawing, reloading xref is required.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600