AutoCAD Civil 3D :: Showing Features In Profile Bands

Oct 29, 2012

I'm currently making a profile view where i want my features/objects to be shown in the bands for chain age elevation etc.

I have fences footpaths & vegetation lines that i can show in my profile view by 'projecting objects to profile view', but i was wondering if I could show these in the bands instead as it would be more convenient.

From what i can see in my bands I can label at Major Stations, Minor Stations, Horizontal Geometry Point, Vertical Geometry Point, Station Equation & Incremental Distance.

I've attached a picture showing what it currently looks like.

[URL]...........

View 1 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Profile View Bands

Jan 11, 2014

I'm having difficulty adding bands to a profile view in Civil 3D 2013 in that the bands appear to be come corrupt in not showing the data (the check box to show is unselected, even if I set it to show) and when I go into the UI and turn the bands to show the bands don't show the information correctly. 

 Alignment align = profileView.AlignmentId.GetObject(OpenMode.ForRead) as Alignment;
Profile prof = profObjId.GetObject(OpenMode.ForRead) as Profile;
if (!profileView.IsWriteEnabled) profileView.UpgradeOpen();
profileView.StyleId = profViewStyleObjId;ProfileViewBandItemCollection bottomBandItems =

[Code] ..........

View 7 Replies View Related

AutoCAD Civil 3D :: Profile View - Bands

Oct 21, 2013

I've been trying to set up a profile view to look like the Section i've attached (Done Manually) but having great difficulty with the bands.

Any detailed long-sections of a pipe network done with C3D that i could work off.

View 1 Replies View Related

AutoCAD Civil 3D :: Profile Data Bands For Pipes?

May 15, 2012

In order to have a data band at the bottom of my profile label the station and invert of my sewer pipe I just created a profile along the pipe and then have a data band in my profile that labels that profile.  I have that profile style set to not plot so this way I can leave it on all the time.  This is all fine and well.  I have labels every 100' that label the station and invert elevation but at times I want to label miscellaneous locations along my pipe such as a bend or something.  How do I add an addition data band label to achieve this?  Everything I have found only lets me have these labels at a specified increment set in the band style.

View 2 Replies View Related

AutoCAD Civil 3D :: Profile Bands - EG Elevations Blank

Jun 28, 2011

Civil 3D 2011: 

I have 7 roads in my drawing and all of the profile data bands except one are correct.  We first started with an overall profile with the EG created from a surface and the FG created by drawing in profile, then created multiple profile views.  The only thing wrong with the one road profile is the data band is not showing the EG elevations.  The strange thing is under Profile View Properties - Bands Tab, Profile 1 is set to EG and Profile 2 is set to FG, so it recognizes it is there and is also shown in the profile, however no elevations.  I have tried recreating the multi profile views.  Attached is a screen shot to give you a visual. 

View 2 Replies View Related

AutoCAD Civil 3D :: Profile View Bands Customization

Jan 10, 2014

set up my profile view and profile view styles as per attached pdf and dwg?

View 3 Replies View Related

AutoCAD Civil 3D :: Copying Profile View Bands

Apr 26, 2012

I've created a profile view with a specific set of bands.  is there a way to copy this set of bands to another profile view?

View 1 Replies View Related

AutoCAD Civil 3D :: Adding Data Bands Below Profile View

Apr 10, 2013

I want to show the information on the attached document in the drawing also attached in civl 3d. The final outcome layout of band data i want is titled wanted outcome and the drawing is preliminary vertical long section.

View 9 Replies View Related

AutoCAD Civil 3D :: Profile Data Shift Above Bands In Viewports

Aug 10, 2011

I have profiles in viewports were the data from the bands are shifting to a point above my bands.  The profiles are correct in model space but not in paperspace, when I return to a layout tab.  If I go into the viewport and regen then the data will temporarily go back to its correct location. If I switch between layouts the data shift. If I try to select the band data the pick point are above the bands, where they default to.  This affect not one band but all bands associated with that profile;elevations, stations, pipe data.  This wasn't an issue at first it just started happening to the drawing.  The drawings were fine and I plotted out a check set to review and when I go back to fix a couple of things this started happening. 

I have three profiles all set to 1:5. Two viewports are 1:500 and a third is 1:250, three different layouts.  The 1:250 profile only affect the pipe data only and not the elev or the stations data.  I have attached a screen shot showing the same profile in two viewports the left one shows the new default position of the band data and the right one is a regenerated viewport showing were the data should be.

View 6 Replies View Related

AutoCAD Civil 3D :: Profile View Horizontal Geometry Bands

Sep 9, 2013

I'm using C3D 2012.  I created a profile view for a straight horizontal alignment.  The band label for the horizontal won't appear for this particular straight aligment.  I have a few other alignments that has curves in it and the profile view displays the labels fine.

I tried to create a new straight alignment again, create a profile view but I get the same results.I also tried it on a new drawing using the NCS metric template with same results.

I can think of (if this is a bug) is to extend my alignment by say 0.1m and add a new IP at the correct alignment end, mask that on plan and end my profile view to the right length. 

View 5 Replies View Related

AutoCAD Civil 3D :: Plan And Profile Bands Are Shrinking - 2010?

Jun 15, 2011

When I am doing my plan and profiles I have come across a couple of instances where when I am ready to plot or just switching over to the layout tab that the bottom bands of my profile have shrunk.  Is thereanything that i can do to stop this or to easily restore them back to normal size?  Could this be a Civil 3D 2010 issue or more likely an issue with the template that we had built for our company.

View 6 Replies View Related

AutoCAD Civil 3D :: Data Bands - Multiple Surfaces Sampling From One Design Profile?

Jun 26, 2013

I have 2 different surfaces (Existing Ground & Proposed Pipe Invert) that I want to have the elevations shown for in a profile data band, but I want them to show at the design profile's PVIs (Proposed Road).  Is it possible to set up a data band style that samples at one profile's geometry points but displays the elevations from these points from a different profile?  My workaround is to set the data bands to all sample from the design profile first and label over the design profile's data band but I'm hoping for a cleaner solution.  Attached is an image showing the profile view in question.

View 5 Replies View Related

AutoCAD Civil 3D :: Proposed Profile And Existing Surface Not Showing In Profile

Jun 17, 2013

I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.

View 3 Replies View Related

AutoCAD Civil 3D :: Showing Profile Elevation Differences Right Above Profile 2

Jul 17, 2012

differences in elevations of points along Profile 2 (the proposed new road elevation) and Profile 1 (the existing elevation/surface) should be computed and shown right above the Profile 2 line. For example, if at a certain point PT 1 the elevation of the proposed road is 132.44 meters and the elevation of the existing surface is 132.45 meters, the difference is -0.01 meters and it should be shown exactly above the Profile 2 line (or a little bit above it) but not on it. The same should be done for every chosen point along the proposed profile.

So far, I have done this manually, by dragging the difference (already automatically computed and shown in one of the bands below the profiles) to the correct place for every single point. However, I don't know how to do this automatically.

View 6 Replies View Related

AutoCAD Civil 3D :: Missing Data From Profile View Vertical Geometry Data Bands?

Sep 9, 2011

i have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.

View 4 Replies View Related

AutoCAD Civil 3D :: Assembly Not Showing On Profile

Aug 1, 2013

I can’t seem to manage to get the profile working, the assembly seems to look ok but it doesn’t show on the profile!

The assembly just follows the line of existing ground and does not show the height of the assembly (barrier). Also, if you take a quick section through the alignment/corridor it shows the assembly but doesn’t show it fully?

View 6 Replies View Related

AutoCAD Civil 3D :: Surface Not Showing On Profile

Jan 23, 2013

I have the profile of my pressure network and storm crossings converted into ellipses but I can't get my surface to show on the profile to show the amount of cover I have between the existing ground and top of pipe.

View 1 Replies View Related

AutoCAD Civil 3D :: Lateral Pipe In Profile Not Showing Up

Sep 27, 2012

I have created a pipe network and a couple of the manholes have laterals coming in at 90 degrees to the main line. I haven't been able to get these to show up in my profile views although they are listed in the manhole invert labels.

View 9 Replies View Related

AutoCAD Civil 3D :: Showing Super Elevation In Profile View

Jun 1, 2012

We don not show CL profiles and only show the gutters on the CL profile view. We also do not used profile bands.

I need to show Superelevation on both left and right profiles complete with labeling.

Short of creating a seperate alignment for each, sampling the corridor surface, superimposing it onto the CL profile view and then creating a layout profile by drawing over the sampled surface.

View 2 Replies View Related

AutoCAD Civil 3D :: Design Profile Actively Selected With Grips Showing

Oct 24, 2013

We have recently installed Civil 3D 2014 Service Pack 1, and while for the most part it works great, we are noticing one significant issue with profiles.  In particular, when we have a design profile actively selected with grips showing, and then select one of the grips, the PVI you are editing becomes offset from the cursor.  When you select a point with the cursor, the profile syncs back up as you would expect.

Just thinking out loud, but it seems like it would be some sort of graphic card issue, but we are seeing it across multiple machines.

View 9 Replies View Related

AutoCAD Civil 3D :: Projecting Objects To Profile View And Showing Point Of Intersection

Nov 11, 2013

Say I'm projecting some 3D polylines to a profile view I have, and the 3D polylines cross the alignment defining the profile view. Is there a way to format the projections such that the point of intersection is identified, and that the points will be updated if I change either the alignment or the 3D polylines?

View 1 Replies View Related

AutoCAD Civil 3D :: Vertical Cure Data Not Showing On Super Imposed Profile

Jan 14, 2013

Im currently having problems with my profiles showing vertical curve data on a superimposed profile. The data shows on the normal profile however when i superimpose it to another profile i cant get the program to show it. 

View 4 Replies View Related

AutoCAD Civil 3D :: Vertical Curve Information Not Showing Up On Profile Created From Corridor Line?

Aug 9, 2012

I created a road centerline profile and corridor and then created a profile of the two curb lines from the corridor. The road profile that I made has a vertical curve in it but the curb profiles do not show that information, just grade breaks every 25 feet based on the corridor sampling distance.

I would like to have the vertical curve information on the curb profiles.

View 3 Replies View Related

AutoCAD Civil 3D :: White Bands In Sections

Sep 1, 2013

Every now and then I open a model and the sections/profiles all solid white 'hatch' within the bands.

I have closed down and regenerated in the hope it has something to do with re-freshing the model, but no luck.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Set More Bands In Section View

May 31, 2012

I have a problem to set more bands in section view.

Normaly I word with 3 bands (existing elevations, designed elevations and the distances between them), but now I need another 2 bands:

1) is the diference between the top surface of the coridor and the existing surface

2) is the diference between the bottom surface coridor and the existing surface

I want ot ask maybe there is a setting to not let me make more bands?

In fact I make the 2 more bands but the Civil 3D 2012 and 2013 is not giveing me the data in these bands.

I uplloaded a picture for example to be more clear.

View 3 Replies View Related

AutoCAD Civil 3D :: Cross Section Data Bands

Jan 2, 2009

I am creating a data band for Finished Ground. I have created a Top surface from my corridor and have sampled that as well as my original ground. I am trying to add data bands to an existing cross section view. When adding data bands for the cross section, I first go to the Section View Properties, add the data band, in this case, "FG Elevations", In the "Section1" column, I pick the Corridor surface that was sampled.

The data band does not display data. I know the data band works, because I picked the original ground as the "Section1" and it gave me the elevation.

I have noticed that under the "Sections" tab of the Section View Properties, and in the "Type" column, the original ground surface has a different symbol than the corridor surface. I have also noticed that if I have only the "Draw" boxes for the sampled corridor surfaces in the section view checked, nothing is drawn the section view. The corridor surfaces seem like they are not really there. Am I not able to retrieve data band data from a corridor surface?? If this is the case how do I go about making the corridor top surface something I can get data from?

View 4 Replies View Related

AutoCAD Civil 3D :: How To Add Data Bands To Minor Stationing As Well

Oct 3, 2012

We are doing a waterline, approximately 5 miles worth, and I was curious how to add the data bands to the minor stationing as well.  We want to show EG elevations every 25' but so far I'm unable to find a way to make it show. The major stations are fine, I'm just not seeing the "switch" to get the minor ones on as well.

View 2 Replies View Related

AutoCAD Civil 3D :: Duplicate Geometry Point Labels In PV Bands

Apr 29, 2012

I do know that tere is supposed to be an algorithm in C3D that will recognise when two geometry points are coincident on a profile view...that is, say a profile vertical geometry point happens to occur on a major station (for example).

I have never seen this actually work. When I have this situation, the labels stagger and I get two columns of identical data on my PV.

I know I can remove individual labels bY CTRL+select and eIther erase or turn visibility to false, but I would rather that C3D figured it out for me and removed the duplicate data.

Viideo link explains what I mean..

[URL]....

C3D2011
Win XP
Dell Precision t1600 4Mb RAM
C3D 2011, Win 7, Dell M6500, 8Gb RAM

View 4 Replies View Related

AutoCAD Civil 3D :: Copy The Settings Of Profile1 / Profile2 In Bands

Jul 2, 2012

I would like to copy the settings of Profile1 & Profile2 in bands from one ProfileView to another ProfilView.

I succeed to read Id (and name) for each ProfilViewBandItem form the source ProfileView, then I select the target ProfileView.

I open it in Write mode, and for each ProfileViewBandItem, I replace the Profile1Id and Profile2Id by good Id, but when I commit transaction nothing appears, the profilview is not updated, bands stay with their original settings.

How can I force the ProfileView to be updated after assigning new Id for Profile 1 & 2?

View 1 Replies View Related

AutoCAD Civil 3D :: Section View Bands Shows Wrong Elevation?

Feb 25, 2013

Elevations existing ground gives in the band not the correct value, I putted everything in meters but it still doesn t match with the label that gives the correct elevation, same problem with the offset distance in the band.

View 4 Replies View Related

AutoCAD Civil 3D :: Adjustment Of Section View Data Bands 2013?

Jan 14, 2013

I have many section views of a road where I want to calculate ground volumes. I have a curb in a section view and I want that Civil showed me just an elevation at the top of the curb and at the top of the road cover. Is it possible to do that? And also distances: I want that Civil just show me a distance from the center of a road to a curb and from a curb to the edge of the road.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved