AutoCAD Civil 3D :: Copy The Settings Of Profile1 / Profile2 In Bands
Jul 2, 2012
I would like to copy the settings of Profile1 & Profile2 in bands from one ProfileView to another ProfilView.
I succeed to read Id (and name) for each ProfilViewBandItem form the source ProfileView, then I select the target ProfileView.
I open it in Write mode, and for each ProfileViewBandItem, I replace the Profile1Id and Profile2Id by good Id, but when I commit transaction nothing appears, the profilview is not updated, bands stay with their original settings.
How can I force the ProfileView to be updated after assigning new Id for Profile 1 & 2?
View 1 Replies
ADVERTISEMENT
Aug 23, 2012
I have a user who will be moving to a new Windows 7 computer, for which I have installed AutoCad Civil 3D 2012. They would like it so that all of their settings and preferences are copied over from their current version of AutoCad Civili 3D 2008. Currently the user has windows XP professional.
how to do this as I am unfamiliar with AutoCad.
View 2 Replies
View Related
Sep 1, 2013
Every now and then I open a model and the sections/profiles all solid white 'hatch' within the bands.
I have closed down and regenerated in the hope it has something to do with re-freshing the model, but no luck.
View 2 Replies
View Related
May 31, 2012
I have a problem to set more bands in section view.
Normaly I word with 3 bands (existing elevations, designed elevations and the distances between them), but now I need another 2 bands:
1) is the diference between the top surface of the coridor and the existing surface
2) is the diference between the bottom surface coridor and the existing surface
I want ot ask maybe there is a setting to not let me make more bands?
In fact I make the 2 more bands but the Civil 3D 2012 and 2013 is not giveing me the data in these bands.
I uplloaded a picture for example to be more clear.
View 3 Replies
View Related
Jan 11, 2014
I'm having difficulty adding bands to a profile view in Civil 3D 2013 in that the bands appear to be come corrupt in not showing the data (the check box to show is unselected, even if I set it to show) and when I go into the UI and turn the bands to show the bands don't show the information correctly.
Alignment align = profileView.AlignmentId.GetObject(OpenMode.ForRead) as Alignment;
Profile prof = profObjId.GetObject(OpenMode.ForRead) as Profile;
if (!profileView.IsWriteEnabled) profileView.UpgradeOpen();
profileView.StyleId = profViewStyleObjId;ProfileViewBandItemCollection bottomBandItems =
[Code] ..........
View 7 Replies
View Related
Oct 21, 2013
I've been trying to set up a profile view to look like the Section i've attached (Done Manually) but having great difficulty with the bands.
Any detailed long-sections of a pipe network done with C3D that i could work off.
View 1 Replies
View Related
Oct 29, 2012
I'm currently making a profile view where i want my features/objects to be shown in the bands for chain age elevation etc.
I have fences footpaths & vegetation lines that i can show in my profile view by 'projecting objects to profile view', but i was wondering if I could show these in the bands instead as it would be more convenient.
From what i can see in my bands I can label at Major Stations, Minor Stations, Horizontal Geometry Point, Vertical Geometry Point, Station Equation & Incremental Distance.
I've attached a picture showing what it currently looks like.
[URL]...........
View 1 Replies
View Related
May 15, 2012
In order to have a data band at the bottom of my profile label the station and invert of my sewer pipe I just created a profile along the pipe and then have a data band in my profile that labels that profile. I have that profile style set to not plot so this way I can leave it on all the time. This is all fine and well. I have labels every 100' that label the station and invert elevation but at times I want to label miscellaneous locations along my pipe such as a bend or something. How do I add an addition data band label to achieve this? Everything I have found only lets me have these labels at a specified increment set in the band style.
View 2 Replies
View Related
Jan 2, 2009
I am creating a data band for Finished Ground. I have created a Top surface from my corridor and have sampled that as well as my original ground. I am trying to add data bands to an existing cross section view. When adding data bands for the cross section, I first go to the Section View Properties, add the data band, in this case, "FG Elevations", In the "Section1" column, I pick the Corridor surface that was sampled.
The data band does not display data. I know the data band works, because I picked the original ground as the "Section1" and it gave me the elevation.
I have noticed that under the "Sections" tab of the Section View Properties, and in the "Type" column, the original ground surface has a different symbol than the corridor surface. I have also noticed that if I have only the "Draw" boxes for the sampled corridor surfaces in the section view checked, nothing is drawn the section view. The corridor surfaces seem like they are not really there. Am I not able to retrieve data band data from a corridor surface?? If this is the case how do I go about making the corridor top surface something I can get data from?
View 4 Replies
View Related
Oct 3, 2012
We are doing a waterline, approximately 5 miles worth, and I was curious how to add the data bands to the minor stationing as well. We want to show EG elevations every 25' but so far I'm unable to find a way to make it show. The major stations are fine, I'm just not seeing the "switch" to get the minor ones on as well.
View 2 Replies
View Related
Jun 28, 2011
Civil 3D 2011:
I have 7 roads in my drawing and all of the profile data bands except one are correct. We first started with an overall profile with the EG created from a surface and the FG created by drawing in profile, then created multiple profile views. The only thing wrong with the one road profile is the data band is not showing the EG elevations. The strange thing is under Profile View Properties - Bands Tab, Profile 1 is set to EG and Profile 2 is set to FG, so it recognizes it is there and is also shown in the profile, however no elevations. I have tried recreating the multi profile views. Attached is a screen shot to give you a visual.
View 2 Replies
View Related
Jan 10, 2014
set up my profile view and profile view styles as per attached pdf and dwg?
View 3 Replies
View Related
Apr 26, 2012
I've created a profile view with a specific set of bands. is there a way to copy this set of bands to another profile view?
View 1 Replies
View Related
Apr 10, 2013
I want to show the information on the attached document in the drawing also attached in civl 3d. The final outcome layout of band data i want is titled wanted outcome and the drawing is preliminary vertical long section.
View 9 Replies
View Related
Apr 29, 2012
I do know that tere is supposed to be an algorithm in C3D that will recognise when two geometry points are coincident on a profile view...that is, say a profile vertical geometry point happens to occur on a major station (for example).
I have never seen this actually work. When I have this situation, the labels stagger and I get two columns of identical data on my PV.
I know I can remove individual labels bY CTRL+select and eIther erase or turn visibility to false, but I would rather that C3D figured it out for me and removed the duplicate data.
Viideo link explains what I mean..
[URL]....
C3D2011
Win XP
Dell Precision t1600 4Mb RAM
C3D 2011, Win 7, Dell M6500, 8Gb RAM
View 4 Replies
View Related
Aug 10, 2011
I have profiles in viewports were the data from the bands are shifting to a point above my bands. The profiles are correct in model space but not in paperspace, when I return to a layout tab. If I go into the viewport and regen then the data will temporarily go back to its correct location. If I switch between layouts the data shift. If I try to select the band data the pick point are above the bands, where they default to. This affect not one band but all bands associated with that profile;elevations, stations, pipe data. This wasn't an issue at first it just started happening to the drawing. The drawings were fine and I plotted out a check set to review and when I go back to fix a couple of things this started happening.
I have three profiles all set to 1:5. Two viewports are 1:500 and a third is 1:250, three different layouts. The 1:250 profile only affect the pipe data only and not the elev or the stations data. I have attached a screen shot showing the same profile in two viewports the left one shows the new default position of the band data and the right one is a regenerated viewport showing were the data should be.
View 6 Replies
View Related
Sep 9, 2013
I'm using C3D 2012. I created a profile view for a straight horizontal alignment. The band label for the horizontal won't appear for this particular straight aligment. I have a few other alignments that has curves in it and the profile view displays the labels fine.
I tried to create a new straight alignment again, create a profile view but I get the same results.I also tried it on a new drawing using the NCS metric template with same results.
I can think of (if this is a bug) is to extend my alignment by say 0.1m and add a new IP at the correct alignment end, mask that on plan and end my profile view to the right length.
View 5 Replies
View Related
Jun 15, 2011
When I am doing my plan and profiles I have come across a couple of instances where when I am ready to plot or just switching over to the layout tab that the bottom bands of my profile have shrunk. Is thereanything that i can do to stop this or to easily restore them back to normal size? Could this be a Civil 3D 2010 issue or more likely an issue with the template that we had built for our company.
View 6 Replies
View Related
Feb 25, 2013
Elevations existing ground gives in the band not the correct value, I putted everything in meters but it still doesn t match with the label that gives the correct elevation, same problem with the offset distance in the band.
View 4 Replies
View Related
Jan 14, 2013
I have many section views of a road where I want to calculate ground volumes. I have a curb in a section view and I want that Civil showed me just an elevation at the top of the curb and at the top of the road cover. Is it possible to do that? And also distances: I want that Civil just show me a distance from the center of a road to a curb and from a curb to the edge of the road.
View 2 Replies
View Related
Jun 26, 2013
I have 2 different surfaces (Existing Ground & Proposed Pipe Invert) that I want to have the elevations shown for in a profile data band, but I want them to show at the design profile's PVIs (Proposed Road). Is it possible to set up a data band style that samples at one profile's geometry points but displays the elevations from these points from a different profile? My workaround is to set the data bands to all sample from the design profile first and label over the design profile's data band but I'm hoping for a cleaner solution. Attached is an image showing the profile view in question.
View 5 Replies
View Related
Sep 9, 2011
i have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.
View 4 Replies
View Related
Jan 16, 2012
I have been asked to do a workshop away from our offices and have been issued with a laptop.
My only issue is that I would like to copy all my settings, workspaces (including toolbars), plotter settings and drawing template files (.dwt) files from my desktop to the laptop.
View 1 Replies
View Related
Jul 26, 2013
I'm the first one in my office to start using Inventor - I've gotten mine set up how I like it with our company standards and templates.
How can I transfer all of the customizations from my PC to the several new Inventor users in my office?
Is there a way for Inventor to pull things off of the network instead of off of my hard drive to keep all of our systems uniform?
View 9 Replies
View Related
Aug 3, 2011
I recently upgraded to Civil 3D 2011 from C3D2010. I have used the same ACAD.PGP file for years that includes the shortcut C for the COPY command. Up until C3D2011 this would always allow me to copy an entity multiple times, (the default when COPYMODE is set to 0).
I am running C3D2011 64bit on WIN 7 64bit OS. It happens with other commands too that use a dialog box normally, i.e. INSERT - it only brings up the command line version of it.
View 5 Replies
View Related
Sep 9, 2013
I recently moved a user to a new PC and setup AutoCAD 2011 after resetting the license through the helpdesk. All works well, however when the user opens her drawings created in the old installation, all the fonts are too big and possibly the wrong type. There are other installations in the office which open the same files/drawings and the fonts/tect appears perfect.
So the question is, how do I transfer the settings from an existing installation, or better yet, how do I specifiy the default font for all drawings?
View 9 Replies
View Related
Feb 10, 2014
I just recently reformated my computer and I've been having an issue with copy and paste from Illustrator to Photoshop. Before I could copy a 2"x2" vector box from Illustrator into photoshop making a new document and the size and resolution would match. That is the new document would say 2"x2" at 300 ppi in photoshop and the preset would read "clipboard". I would then hit ok and paste and it would match perfectly. Now since I've reformated, photoshop always creates a new document with the wrong size regardless of the settings I enter in Illustrator or photoshop. I have document raster and effects set at 300 ppi in Illustrator and I have the new document set at 300 in photoshop, but it always transfers the 2"x2" box at 72 dpi regardless of settings. Again this used to work before so I'm assuming there is some setting I forgot about.
The main issue is the clipboard preset is not matching the document size, its almost as if Illustartor is telling photoshop it's a different resolution when it's not. Copying to 72 ppi seems to have no issue, which makes me think Illustrator just isn't sending it out at 300 ppi, but I don't know why as I have the document set at 300 ppi. I confirmed this as I can make a 2"x2" box in photoshop and paste into Illustrator and it reads as 2"x2" at 300 ppi in Illustrator, but if I copy from Illustrator back to photoshop it pastes it at 72 ppi. Changing the settings to 300 ppi in Illustrator seems to have no effect. Might be a bug. Should I try reinstalling?
View 2 Replies
View Related
Jun 8, 2013
My issue is that I have a number of presets-brushes, tools, actions, workspace setup, etc, that allow me to have speed and focus on getting the job done. I also work with a wacom tablet, and although that is 3rd party, I need know that photoshop is set up to maximize the brush sensitivity of the tablet.
Is there a way for me to export my settings from one machine to another? And a way for them to revert back to thier own after I finish?
View 1 Replies
View Related
Oct 5, 2013
I recently had to remove some sensor dust spots from three bracketed images I was using for HDR. I used the "Makeover" tool on each image. I understand that in Lightroom, you can copy setting like this from one image to others. That would save a lot of time rather than removing the spots from each individual image.
View 3 Replies
View Related
Jun 19, 2004
I have an action that creates an adjustment layer (curves) which stops and prompts you to load the saved curves file.
If I double click that step to edit, I can load the "saved" curves file and it will run flawlessly. BUT...if I move the curves file or share this action with someone, the action will no longer function since the saved path is incorrect.
Is there any way to open up the saved curves file and just write that into the action? There are a lot of settings and I would have a very hard time recreating the curves adjustment from scratch.
View 4 Replies
View Related
Jan 21, 2014
I have corrected my saturation on a photo in the Develop module and would like to copy that saturation to other photos. I click 'copy' in the lower left and get the dialog to select my choice of settings, so I only check saturation. I then move to my desired recipient image and click 'paste' and nothing happens. Same result in Library module when I use Photo > Develop Settings > Copy Settings and Paste Settings.
I am using LR 5.3 on Windows Pro 7
View 6 Replies
View Related
