AutoCAD 2010 :: Copy Font Settings From One Installation To Another?
Sep 9, 2013
I recently moved a user to a new PC and setup AutoCAD 2011 after resetting the license through the helpdesk. All works well, however when the user opens her drawings created in the old installation, all the fonts are too big and possibly the wrong type. There are other installations in the office which open the same files/drawings and the fonts/tect appears perfect.
So the question is, how do I transfer the settings from an existing installation, or better yet, how do I specifiy the default font for all drawings?
View 9 Replies
ADVERTISEMENT
Jan 28, 2010
How to convert standalone installation of AutoCAD 2010 to network one without uninstalling the existing standlone version.
View 9 Replies
View Related
Dec 30, 2012
I'm trying to install the EPS font file in Corel Draw X6 and can't seem to get it to work. The Font Navigator can't find the font and the "Install EPS" function in CDX6 just dumps an image of the whole font into whatever I'm working on.
View 2 Replies
View Related
Jun 29, 2007
I am doing a website for a client whose logo font uses a font that I think is by Adobe called Sacker-H The designer sent a zip file containing about 5 files, one of which is AdobeFnt07.lst The others are .bmap files. I am clueless how to intall these on my system?
View 3 Replies
View Related
Aug 6, 2011
what to copy from my home installation of Coreldraw 12 so I can put it on the installation I use at work. I want to save EVERYTHING, hotkeys, default new documents, default and custom palletes, macros, command customizations were I have applied certain hotkeys like ctrl+m or whatever to run those custom made macros/vba scripts, things like snap to grid, snap to object, wether or not to save backups and if so how often, etc... Bascialy ABSOLUTLEY EVERYTHING.
I tried copying CorelDrw.ini, coreldrw.env, and GlobalMacros from my home computer from the folder:
C:Program FilesCorelCorel Graphics 12Draw
and then pasting it into the same folder on my work machine, clicking OK when asked if I want to replace the already existing files there. Some things worked, some things seemed not to. For example, the macros i wrote copied over fine, but the hot key association i made for them didnt, i had to set that up again in Customization.
I would love to find out how I can really back up all my settings so I can simply copy them over to my work machine instead of taking a couple hours to re-enter everything in. Also, I think all serious corel users would want to keep a backup copy handy in case they ever have to re-install corel or if they buy a new computer, etc.
View 12 Replies
View Related
Nov 10, 2013
What are the folders of my current CorelDRAW installation i can back-up and use them to replace the folders of a new installation so to retain all my settings (workspaces, customizations, shortcuts, settings, plugins, etc)
I need to uninstall and re-install my current installation
View 4 Replies
View Related
Jan 11, 2013
i have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
View 4 Replies
View Related
Feb 11, 2012
The installation process presented an error during the stage of FARO LS 1.1.406.58.
View 2 Replies
View Related
Jun 6, 2013
wizard installation error on visual studio 2010
View 1 Replies
View Related
Aug 9, 2012
I am facing problem for installing AutoCad 2011.I am getting this type of error
installation failed
autocad 2011
failed - fatal error during installation
View 1 Replies
View Related
Jun 15, 2009
When I try to open any of the Hydraflow extensions, I get the following message: "Installation error Invalid installation. Program ending." I ran a repair from Windows, but get the same result. How to successfully open/use any of these Hydraflow components in 2010?
View 6 Replies
View Related
May 23, 2012
I cannot find my point settings.
View 7 Replies
View Related
Jan 16, 2012
I have been asked to do a workshop away from our offices and have been issued with a laptop.
My only issue is that I would like to copy all my settings, workspaces (including toolbars), plotter settings and drawing template files (.dwt) files from my desktop to the laptop.
View 1 Replies
View Related
Jul 26, 2013
I'm the first one in my office to start using Inventor - I've gotten mine set up how I like it with our company standards and templates.
How can I transfer all of the customizations from my PC to the several new Inventor users in my office?
Is there a way for Inventor to pull things off of the network instead of off of my hard drive to keep all of our systems uniform?
View 9 Replies
View Related
Aug 23, 2012
I have a user who will be moving to a new Windows 7 computer, for which I have installed AutoCad Civil 3D 2012. They would like it so that all of their settings and preferences are copied over from their current version of AutoCad Civili 3D 2008. Currently the user has windows XP professional.
how to do this as I am unfamiliar with AutoCad.
View 2 Replies
View Related
Jul 2, 2012
I would like to copy the settings of Profile1 & Profile2 in bands from one ProfileView to another ProfilView.
I succeed to read Id (and name) for each ProfilViewBandItem form the source ProfileView, then I select the target ProfileView.
I open it in Write mode, and for each ProfileViewBandItem, I replace the Profile1Id and Profile2Id by good Id, but when I commit transaction nothing appears, the profilview is not updated, bands stay with their original settings.
How can I force the ProfileView to be updated after assigning new Id for Profile 1 & 2?
View 1 Replies
View Related
Feb 14, 2014
I keep trying to package an Indesign file for print, it seems to have everything present but I keep getting a window that says: "Cannot copy necessary font(s)'. It hasn't happened before.
View 13 Replies
View Related
Feb 10, 2014
I just recently reformated my computer and I've been having an issue with copy and paste from Illustrator to Photoshop. Before I could copy a 2"x2" vector box from Illustrator into photoshop making a new document and the size and resolution would match. That is the new document would say 2"x2" at 300 ppi in photoshop and the preset would read "clipboard". I would then hit ok and paste and it would match perfectly. Now since I've reformated, photoshop always creates a new document with the wrong size regardless of the settings I enter in Illustrator or photoshop. I have document raster and effects set at 300 ppi in Illustrator and I have the new document set at 300 in photoshop, but it always transfers the 2"x2" box at 72 dpi regardless of settings. Again this used to work before so I'm assuming there is some setting I forgot about.
The main issue is the clipboard preset is not matching the document size, its almost as if Illustartor is telling photoshop it's a different resolution when it's not. Copying to 72 ppi seems to have no issue, which makes me think Illustrator just isn't sending it out at 300 ppi, but I don't know why as I have the document set at 300 ppi. I confirmed this as I can make a 2"x2" box in photoshop and paste into Illustrator and it reads as 2"x2" at 300 ppi in Illustrator, but if I copy from Illustrator back to photoshop it pastes it at 72 ppi. Changing the settings to 300 ppi in Illustrator seems to have no effect. Might be a bug. Should I try reinstalling?
View 2 Replies
View Related
Jun 8, 2013
My issue is that I have a number of presets-brushes, tools, actions, workspace setup, etc, that allow me to have speed and focus on getting the job done. I also work with a wacom tablet, and although that is 3rd party, I need know that photoshop is set up to maximize the brush sensitivity of the tablet.
Is there a way for me to export my settings from one machine to another? And a way for them to revert back to thier own after I finish?
View 1 Replies
View Related
Oct 5, 2013
I recently had to remove some sensor dust spots from three bracketed images I was using for HDR. I used the "Makeover" tool on each image. I understand that in Lightroom, you can copy setting like this from one image to others. That would save a lot of time rather than removing the spots from each individual image.
View 3 Replies
View Related
Jun 19, 2004
I have an action that creates an adjustment layer (curves) which stops and prompts you to load the saved curves file.
If I double click that step to edit, I can load the "saved" curves file and it will run flawlessly. BUT...if I move the curves file or share this action with someone, the action will no longer function since the saved path is incorrect.
Is there any way to open up the saved curves file and just write that into the action? There are a lot of settings and I would have a very hard time recreating the curves adjustment from scratch.
View 4 Replies
View Related
Jan 21, 2014
I have corrected my saturation on a photo in the Develop module and would like to copy that saturation to other photos. I click 'copy' in the lower left and get the dialog to select my choice of settings, so I only check saturation. I then move to my desired recipient image and click 'paste' and nothing happens. Same result in Library module when I use Photo > Develop Settings > Copy Settings and Paste Settings.
I am using LR 5.3 on Windows Pro 7
View 6 Replies
View Related
Jun 22, 2012
Recently upgraded to LR 4.1.The copy and paste settings and also synchronize setttings in LR 4.1 has stopped working. Rebooted, nothing new added.
View 14 Replies
View Related
Aug 19, 2013
For example you take 2 shots of a model, but with slightly different position, it sucks having to redraw a whole new brush on the next photo. Would be great to be able to sync then just drag the brush pin into place. Like how you can with the radial fand ND filter. And it would be awesome to be able to copy the settings of one, and the paste them onto another pin on another area or another photo.Right now its so time consuming having to sync brush adjustments, erase them, then repaint where I want the same settings applied to a different part of another picture.
Second, need to be able to select multiple or all pins, to be able to move them at the same time. Same for for the ND, radial, spot healing pins.
Third, we need to be able to copy brush settings via right clicking the pin, as well as maybe in the brush panel at the top so its something like like:
Mask: New | Edit | Copy | Paste
View 4 Replies
View Related
May 29, 2011
When starting acad with Startup set to 0 or when launching from a drawing on file, I do not have any problems, however, when Startup is set to 1, not only does the startup menu appear as a blank pop -up, but the AutoCAD splash screen just hangs without the program launching.
Could it be due to the fact that I am running a 64 bit System?
View 2 Replies
View Related
Apr 5, 2014
I have a bunch of Fuji X-T1 raw images that I have converted to DNG form. Once Lightroom supports X-T1 raw images directly, I would like to replace the DNG files by the corresponding raw files (which I have saved) without having to redo all of my edits.
I've tried an experiment with a NEF file, which Lightroom supports: If I convert it to a DNG file, import the DNG file, then replace the DNG file with the corresponding NEF file, Lightroom still thinks the file is named DNG. This behavior makes me nervous. So what I would like to do is to import all of the Fuji raw files, then transfer the develop settings from each DNG file to the corresponding raw file, then finally archive and delete the DNG files.
Is there any way to do this other than by hand? That is, if I have a folder with a few hundred DNG files, is there any way to tell Lightroom to take the develop settings of every file in the folder and transfer them to the correspondingly named file in the folder of raw files?
way of accomplishing this that does not involve copying and pasting the data for every image by hand?
View 3 Replies
View Related
Apr 11, 2012
We have a problem with long (like 10 minute) saves.
If we go to Tools / Options / Open and Save / Thumbnail Preview Settings, in the "Sheets and Views" panel, the "Performance-Accuracy Slider" is set all the way to the right, which the Information Panel lists as "Update thumbnails when saving drawing".
If we manually slide it to the center, listed in the Information Panel as "Update thumbnails when accessed", the Save times become less than a minute.
This setting is not saved and we need to reset it each time each drawing is opened.
There has to be a setting because MY STATION did not have this problem with ANY drawing until our Supplier's Support Team got onto my computer yesterday. NOW it's a problem on my computer also.
Setting the UPDATETHUMBNAIL to "0" works, but then we have no Previews.
Setting the UPDATETHUMBNAIL to "1" does not work.
View 3 Replies
View Related
Aug 22, 2012
I have many named UCS settings in the base file but have to apply this setting to at least 30 files... It would be nightmare if I have to do this all one by one.
View 1 Replies
View Related
Mar 11, 2012
How to modify the settings of more than one layout in one go?
I wanted to choose the same printer for many layouts but I found out that I need to modify them one by one.
Some of these layouts have “Adobe pdf converter”, others have the “DWG TO PDF.pc3”. What I need is to set the printer “DWG TO PDF.pc3” for all the layouts in one go.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 7 Replies
View Related
Jul 16, 2011
I am trying to move to a new computer and when I try to export the settings from my old computer using the 'Export AutoCAD 2012 Settings' command I get the following:
An error occured during the xport process. Please try again.
ERROR: There was am error generating the XML file.
Environment:
Windows XP Pro SP3
MS Office 2007
AutoCAD 2012 (part of AutoCAD Revit Architecture Suite 2012)
Otherwise, I have no problems with AutoCAD. I cannot work without my own AutoCAD setup?
View 7 Replies
View Related
Nov 2, 2012
I am having an issue with my Sheet Sets keeping the settings I have entered after closing them out.
For example, I create a new Sheet Set (from Existing Drawings) add my layouts to it, organize them, then I right-click on the Sheet Set name and select Publish > Sheet Set Publish Options
In the dialogue box that opens I change four things:
1. Location: I point it to the network location where I want the DWFs stored.
2. File Format: change from DWFx to DWF (this is due to a limitation with our printing equipment)
3. Type: changed to Single-sheet file
4. Merge Control: changed to Lines Merge
It seems to maintain all of these setting until I close the sheet set out (change drawings, close C3D, etc.) Then when I reopen the Sheet Set later, it will revert the File Format back to DWFx and the Merge Control back to Lines Overwrite.
The reply given did not answer the issue but was mistaken for use with the plot dialogue box, which this is not about. The issue we are having is the sam as above with the "lines merge" ALWAYS reverts back to "lines overwrite" after the sheet set is closed and re-opened. I have seen a thread suggesting that If the PC3 files are read only this may be the problem, but as a cad manager in even the smallest of firms, having the pc3 files read only is just about a must to keep from accidental changes from occuring. Is this the reason? I dont see what conection the pc3 files would have with the settings in the sheet set manager. (all of our pc3 plotter setting are set to "lines merge" in each of the printer settings as well) so, where and why it keeps reverting back to "lines overwrite".
View 1 Replies
View Related
