I keep trying to package an Indesign file for print, it seems to have everything present but I keep getting a window that says: "Cannot copy necessary font(s)'. It hasn't happened before.
View 13 RepliesEvery time I place text into the InDesign document it is automatically converted to Arial Unicode MS Bold with underlines. I want to turn this off, but can't figure out how.
View 2 Replies View RelatedIn Indesign (cs4): When I have marked the textbox and wish to alter the font, I have the last couple of days experienced that I click on the new font I desire, but the font does not change. I have to close down Indesign and then I can change the font. ... for a while, then it happens again, and I have to close down Adobe again. (there is plenty of space in the textbox, that is not the problem). (I have had this CS4 for many years, and not till this last week have I had this probem).
View 5 Replies View RelatedI keep running into this issue in InDesign. I never notice the issue until I go to package it, but I will outline all of my fonts, and when I go to the packaging screen it will say I still have 1 font in the document. It is always Minion Pro (the default). After investigating further, it always seems as if a text field has been "attached" to a shape. Once I delete the shape, when I go to package it it says there are 0 fonts.
So this causes all sorts of problems when I'm packaging because I can't outline the "minion" font because its not actually there (I've tried selecting the shape and clicking outline, but it wont let me). Also the only way around this I have is to delete the shape, and completely rebuild it (which is impratical for many reasons).
how to delete the type? (I have also tried Type on Path > Delete and its greyed out and won't let me choose that option)
I'm using ID CC ME. Much of my work contains a Hebrew word or pharase within an English sentence. Using the standard method to switch to Hebrew in Windows 7 usually give me the Adobe Hebrew font (and I think sometimes Myriad Hebrew). Is there any way to predefine which Hebrew font will be used when making the switch when I want a different font used? I know I can (and do) set a character style for it, but then I must first switch to Hebrew, then type the word or phrase, then use the character style to change the font (it doesn't usually work if you set the character style before switching to Hebrew), then change the character style back for the rest of the text.What is the simplest way to get the Hebrew in the font I want?
View 9 Replies View RelatedSomeone sent me a zip drive with links to fonts used in the original document being worked on, how do I link the font from the files saved on the zipdrive?
View 7 Replies View RelatedI use certain ttf font for creating documents in office products as well as in Adobe Products like InDesign. Since there is a newer version of that font available, I uninstalled the older version in Windows -> Control Panel -> Fonts folder an installed the newer version of that font.
Now all office applications as well as some Adobe applications (PS, Illustrator) show the new font from the fonts menu. But InDesign refuses to deal with that font. InDesign still shows the old version. Therefore I checked the fonts folder of InDesign. But this one is empty. How can I convince InDesign to accept the new font?
I'm on Mac OSX 10.6.8.
I am placing a Word document into InDesign CS6, and no matter what options I choose in the import options, the font styles are not imported into InDesign At the same time, InDesign CS3 imports all the styles perfectly from any Word file.
When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).
I recently moved a user to a new PC and setup AutoCAD 2011 after resetting the license through the helpdesk. All works well, however when the user opens her drawings created in the old installation, all the fonts are too big and possibly the wrong type. There are other installations in the office which open the same files/drawings and the fonts/tect appears perfect.
So the question is, how do I transfer the settings from an existing installation, or better yet, how do I specifiy the default font for all drawings?
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View RelatedI have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
I've a problem with "DWGtoPDF"-Plotter of Acad2013. I give the textstyle "arial" in Acad and plot it to PDF. In the PDF-Sheet i see the Fontname "ArialMT" in the document-options. I want to give the PDF's away and fear, that he gets an error while opening.
View 1 Replies View RelatedI'm using Photoshop CS5. How can I replace all instances of a missing font with a font of my choice?
View 2 Replies View RelatedFont is fuzzy no matter what font type I choose, why is this happening? Using Photoshop CS6.
View 1 Replies View RelatedI want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies View RelatedAfter opening a file from another designer, this Chinese font has taken over my "omens – regular" font file. Anytime I use it, it converts to this font and each time I need to change a font weight, I must do it manually. As you can imagine, I use our company font all day so this slows me down quite a bit. Have you heard of this? It seems like some sort of font virus. I've researched removing it, yet can't seem to find the original font file to get rid of, which is even weirder."
We tried moving the font family to the trash, emptying the trash, rebooting the machine, and re-adding the font family and it still is happening.
I had posted in another thread about wanting to clean up a signature and make it look more font like. I tried that and it seemed to be pretty difficult due to the amount of random in a hand written signature.
So I think I'd like to approach this from the other direction. I have a font I like but I don't want it to look like the font (way too common). Is there a way to alter the font (not the entire font set or even to create a new font but just for a one word Logo)?
I'd ideally like to connect two of the letters and also modify the shapes of the letters just a bit.
my font is so small and its font size is at 72pt how can i make it big again
View 5 Replies View RelatedIs there a way to specify a given system font that should be substituted for a given missing font? For example, the document I'm working with contains CourierStd and CourierStd-Bold which are not installed on my system. I would like to set Illustrator so that any time a document that contains these fonts is opened, Courier New and Courier New Bold are substituted automatically.
View 3 Replies View RelatedAn eps file opens without any problem with the preview as .pdf on Mac OS 10.7.5In illustrator when I open the same file, the main font is not recognized and no warning said the font is not available.
View 7 Replies View RelatedWhen I make a text, and if I like to change the font style how can I do this with out having to click on the new font,
every time I choose a different font I have to click on that font, and if I don't like I have to click on a different one
I like to do it like in Flash MX I move the pointer over the list of fonts and may text change the font style with out click on it
I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 Replies View Relatedi have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
I have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
I recently upgraded to Civil 3D 2011 from C3D2010. I have used the same ACAD.PGP file for years that includes the shortcut C for the COPY command. Up until C3D2011 this would always allow me to copy an entity multiple times, (the default when COPYMODE is set to 0).
I am running C3D2011 64bit on WIN 7 64bit OS. It happens with other commands too that use a dialog box normally, i.e. INSERT - it only brings up the command line version of it.
I am trying to make an assembly copy as separate project using the iLogic Design Copy feature.
Everything seems fine except I do not have my involved in assemblyContet Centerparts in this copy.
I am also have no any possibility to chose the Content Center folder in the iLogic Design Copy feature as it does not showup there.
[URL]
For this example let's take in account that I have 2 identical in every aspect copies (meaning size and content at this point) of the very same image.
1st remains unedited,
2nd is edited only as far as concerning the image > adjustments menu through changing mostly channel mixer, selective color, saturation etc values and had an object attached to it atop of the original depiction before being edited as a whole.
What I want to do is to edit the 1st image, compare in some certain ways the colors of it I guess with the ones of the 2nd, match for instance where color hex value X (and horizontal/vertical X,Y coords - is it needed in order to be more precise and avoid mistakes?) (I guess again) from the 1st image is edited into color (or even additional settings atop of that?) hex value Z, do that automatically for all the combinations and immediately apply the same changes I applied from 2nd pic when unedited (and looked exactly like 1st pic) to the very same 2nd pic in start, TO the 1st pic in the present case. Also in order to do this "color matching" before applied or not I need to set out-seperate the area where I have added an additional object in the 2nd picture and fill it possibly with the original content from the 1st(can it be done in one move) in order for the process to be complete?
That means I turned the 2nd image into a combination of blue-green-red colour (and other) from orange-yellow-cyan (just an example) I want to do the very same to my 1st pic which is orange-yellow-cyan etc.
I am having a problem with memory. I am running Windows XP with 4GB ram. when i start laying out in paper space, i copy the window in one page or copy multiple pages, every time i copy a page of window my memory builds up & up & up with each one until it gets to over 2 GB & the it tell me that if i continue with this next process CAD will crash because i have maxed out the virtual memory. This is usually not a problem when i am doing smaller one off drawings with a few pages of windows but when i am doing a bigger project with 20+ pages or windows i run out of memory.
I gave the latest file to my business partner & he does not have this problem at all. He can open up many windows & as many pages as Cad will allow. His memory always fluctuates around the same 2GB. He is running Windows 7 with 4 GB ram.
I'm upgrading to a Zenbook which has no optical drive so I won't be able to install PS via the disk that I purchased a couple years ago. Would the key from my hard copy work with a downloaded copy of PS?
View 1 Replies View RelatedI'd like to replace all occurrences of font A with font B in my Xara document. Can this be done is a more efficient manner than by hand?
View 3 Replies View Related