Please see attachment. There are two structure label styles in the attachment. The one on the bottom has the leader attached to the edge of the structure and the one on the top has the leader attached to the centre of the structure. How do I change the attachment point for the top label so the leader attaches to the edge of the structure as the bottom label does? Can't seem to find the parameter to change??
View 3 Replies
I would like the arrowhead for the leader labaling my structure in a pipe network to attach to the outside edge of the structure. Right now it attaches to the middle of the structure and is covered by the block representing my structure.
View 9 Replies View RelatedI would like the Leader Attachment for a structure in dragged state to be at the bottom of the top line. I have underlined the top line and would like the leader to extend from the underline.
Is there a way to add a "bottom of the top line" to the pull down menu, or control the leader attachment point in another way?
C3D 2012 running with 64 bit Win7 all up to date on a capable Dell Precision
I want to add the leader part to the leader that is created when I drag a Station Offset label. This would be the part in a three point leader that goes horizontal for a short distance before the label text begins, similar to how a multi-leader is created. Looks weird having the C3D labels be the only "leadered" noted be without the landing.
Where do you find the Leader Attachment Option in the Marker Style. I've looked but don't see it.
Civil 3D 2011
Ok, I'm sure there is a very simple way to fix this that I just haven't yet discovered. When I insert a stacked dimension in the top line of my leader text, the spacing gets automatically adjusted for the hight of the stacked dimension and it adjusts the leader line up so that it actually passes through my top line. Can this be avoided? I have attached a picture for reference.
View 4 Replies View RelatedI do not want the leader and label to flip. Is there a setting to keep the leader and label on one side? When I drag the left to a certain point the right note is the result. I want the bottom note to be the result.
View 5 Replies View RelatedI created this label for my pipe crossing. I want to be able to start the vertical line at the invert, and be able to move the text up and down and have the line adjust.
Currently my dragged state has the arrow head size as 0 and visibility as false, since it starts the leader at the centerline of the pipe. But without using the leader, I cannot adjust the vertical line dynamically.
Just a quick (but possibly hard?) question. I have a multileader set up, but I also want it to automatically include a line which spans the vertical breadth of the text at the end of the landing. It's hard to explain, so I've put an image below.
Currently it's set up as a block that can change in height, depending on how many levels of text I tell it to fit to. Problem is, if I rescale my Multileader, I'll have to go back and rescale the block separately.
Now, possible to include such a feature in a Multileader such that it autoscales and auto lengthens, depending on the height of text?
I have dragged station offset and multileaders next to each other in the drawing. Everything is set to go on the same layer. I am using named (stb) plot styles. The layer's lineweight is set to .25mm. However, I usually make the leaders be lighter in weight - .13mm. I am using text borders on both of these objects.
I can't get both the text and border to be the same in both objects unless I set everything to Bylayer. Given that I want lightweight leaders, and heavier text, this is unnacceptable.
It seems that the StaOff label style text and border weight in DRAGGED state are controlled by one lineweight setting.
In a multi leader, the text weight is always, apparently, Bylayer, and the text border is controlled by the lineweight set for the leader.
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
My dragged state leader does not display properly. The attachment runs through my first line of text. My display is set to "As Composed" I do not want the stacked text setting.
View 9 Replies View RelatedI have a leader that I do NOT want to explode with text at the end of it. Problem is, I need the leader part to be on a layer with a certian line type and a certain layer and I need the text on a different layer. How is this possible!? Also, I have AutoCad LT if that makes a difference (no express tools for example).
...Maybe some way to create a new text style that is linked to a certain layer since that is the only option in the props for the leader that seems like it would control that...?
I'm have a long span of conduits in this tunnel and need to label each of the conduits its 3-4 digit assignment in each viewport of each page. I made a center line to each of these conduits in the layer named that 3-4 digit code (ex, Centerline of ET23 is in layer ET23).
way to make a leader that will just tell me the layer of the object (centerline) I attach it to? Or any way to label the layer of an object?
Is there anyway to prevent AutoCAD from converting a MTEXT leader with a block element attached to a BLOCK leader when doing a copy/paste? See screen shot.
2012-04-05 3-09-00 PM.jpg
I've attached a PDF to my drawing and when I zoom in a bit it shows horizontal bars all over the PDF. The bars show up when printing as well. This is the first time it has ever happened to me.
My PDF Underlay contrast is set to 100, fade to 0, monochrome No, and Adjust colors for background Yes.
Can a expresion be use for text anchor point or Attachment?
I looking at using the ML or MR based on if the distance is Plus or Minus.
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedC3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedI'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
Is it possible to pin a label to another label ? Or pin a label to an object so that when the first label (or object) is moved, the other moves with it ?
View 2 Replies View RelatedIs there a way to have the Arrow leader convert to Loop leader in one click. Our company standards use diamond tags and sometimes i have to change the arrow to loop by inserting a leader.
View 9 Replies View RelatedBelow is a screenshot of the a label i have made dragged, green, and default, white. I want the leader to stay at the lowpoint when i drag it away.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
Here is the setup, I received a survey base from another firm. All of there leaders of text are actually cogo points with labels. I have xrefed the file into my sheet file and rotated the view, so obviously nothing looks like I want. Typically I bring the text forward into my sheet and manipulate it here, but it is attached to a cogo point. I could copy the points and label styles into my current drawing, but this doesn't sound like the best practice. What is a good way to overcome this challenge?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
When I use qleader with mtext annotation , The arrow and texts are inserted as two unit. I can rember there was a facility to use this two objects as a one unit.
View 3 Replies View RelatedI have a road construction ahead sign where I have hatched the background orange (color 30) as a mask since I am using an air photo for the drawing background. The block is fine until I try to use it in a multi leader, then the hatch color switches to block and I can't read the text. The block was created on the same layer as it is inserted. How do I get the orange hatch to show as orange in the multi leader block? See the attached screen shot.
View 5 Replies View RelatedWhen I drag text away from my point there is no leader. I have gone thru everything I can think of in Label and Point styles. I know its probably a simple fix. Somewhere down the rabbit hole is a box that needs/or not a check.
View 2 Replies View RelatedI have been trying for weeks and still cat get it to work. I am trying to make my drag out leader to look like a pline with a width of 0 on one side and a width of 4 on the other for civil 3d 2012. See attached .
View 4 Replies View RelatedI am updating a map and besides manually creating my own block for the "arrow" of the leader. Is there more then one generic leader style I am unaware of to make life easier?
View 1 Replies View RelatedI am using Arial font. When I use a multi leader and snap to a line the text is BOLD. How do I change the properties of the multi leader to elevation 0.00 so the text will not be bold. I tried moving the multi leader to a line with elevation 0.00, but it is still bold.
View 1 Replies View Relatedhow to have an option for the landing direction at the end of a leader line, or a way to edit one that has been created.
View 8 Replies View Related
