AutoCAD 2013 :: Multi Leader - Landing Attachment
Aug 28, 2013
Just a quick (but possibly hard?) question. I have a multileader set up, but I also want it to automatically include a line which spans the vertical breadth of the text at the end of the landing. It's hard to explain, so I've put an image below.
Currently it's set up as a block that can change in height, depending on how many levels of text I tell it to fit to. Problem is, if I rescale my Multileader, I'll have to go back and rescale the block separately.
Now, possible to include such a feature in a Multileader such that it autoscales and auto lengthens, depending on the height of text?
View 7 Replies
ADVERTISEMENT
Apr 23, 2013
How do I make a leader, no text, no landing, grippers on both ends. Every time I go to grab the gripper on the non-arrow side of the leader it moves away from me . The line just moves away from the pointer at an ever increasing speed and distance).
View 9 Replies
View Related
Aug 23, 2013
How to make Multi Leader end line landing or turn 90 degree vertical? I just want to use the leader point to the part and no text at the end of the leader. I guess the only way i know how to do right now is to exploded the M-leader and draw a line vertical down which is not recall proper way . Some people like to use just Leader not Multi leader but i like to use M-leader so i can enter the text in difference line. (See Pic below)
1e.jpg
View 2 Replies
View Related
Apr 17, 2012
All of my multi leaders (mleaders) worked great in 2012 with the added "extend leader to text" for leaders on the end of a text string, but in 2013, they now attach to the end of the box again.
Some appear as though they are "trying" to extend, but the beginning of the leader without the extension now starts at the end of the box on the FIRST line.
See the attached examples:
Top one - Mleader is on the end of a text box larger than the actual text (NOTE: I have many drawings like this, opening them in 2013 is a nightmare)
Version #2 - Note what the leader does in this example, the "extend to end of text" is the correct length, but it starts at the edge of the box, not the end of the first line of text. Again, this worked fine in 2012.
Version #3 - This is what should happen, only happens if you adjust the text box size. I don't really want to spend my clients money updated dozens of multileaders on hundreds of drawings to force the mleader to work.
View 9 Replies
View Related
May 10, 2013
I just upgraded to AutoCAD Lt 2012. In the settings, I was able to figure out how to automatically get a landing line and how long I want it to be. But! When I draw the leader to left of center, it puts the landing on the left side of the line. How can I turn that auto-directional thing off?
View 4 Replies
View Related
Sep 13, 2013
Ok, I'm sure there is a very simple way to fix this that I just haven't yet discovered. When I insert a stacked dimension in the top line of my leader text, the spacing gets automatically adjusted for the hight of the stacked dimension and it adjusts the leader line up so that it actually passes through my top line. Can this be avoided? I have attached a picture for reference.
View 4 Replies
View Related
May 14, 2012
how to have an option for the landing direction at the end of a leader line, or a way to edit one that has been created.
View 8 Replies
View Related
Jan 7, 2012
I want to force the Multileader landing to go left when the program wants to automatically form it to the right. How can you choose/change the direction of the landing line and side on which the text will be placed.
AutoCAD 2011
View 1 Replies
View Related
Mar 27, 2013
Please see attachment. There are two structure label styles in the attachment. The one on the bottom has the leader attached to the edge of the structure and the one on the top has the leader attached to the centre of the structure. How do I change the attachment point for the top label so the leader attaches to the edge of the structure as the bottom label does? Can't seem to find the parameter to change??
View 3 Replies
View Related
Jul 25, 2012
I would like the arrowhead for the leader labaling my structure in a pipe network to attach to the outside edge of the structure. Right now it attaches to the middle of the structure and is covered by the block representing my structure.
View 9 Replies
View Related
May 8, 2012
I would like the Leader Attachment for a structure in dragged state to be at the bottom of the top line. I have underlined the top line and would like the leader to extend from the underline.
Is there a way to add a "bottom of the top line" to the pull down menu, or control the leader attachment point in another way?
View 2 Replies
View Related
Jun 20, 2012
Where do you find the Leader Attachment Option in the Marker Style. I've looked but don't see it.
Civil 3D 2011
View 4 Replies
View Related
Jun 9, 2011
Is it true that you can't attach an Annotative Block to a MultiLeader?This is the message that I got when trying: "Specify leader arrowhead location or [leader Landing first/Content
first/Options] <Options>: OP
Enter an option [Leader type/leader lAnding/Content type/Maxpoints/First
angle/Second angle/eXit options] <eXit options>: C
Select a content type [Block/Mtext/None] <Block>:
Enter block name <DOORTAG>: LEGENDNOTE
Invalid Input."
It's unfortunate because I would like the block to show up Annotative in my Legend, and then again to the proper scale with the Multi Leader
View 4 Replies
View Related
Dec 31, 2012
I have a road construction ahead sign where I have hatched the background orange (color 30) as a mask since I am using an air photo for the drawing background. The block is fine until I try to use it in a multi leader, then the hatch color switches to block and I can't read the text. The block was created on the same layer as it is inserted. How do I get the orange hatch to show as orange in the multi leader block? See the attached screen shot.
View 5 Replies
View Related
Oct 1, 2013
I have a multileader with attributed labels in a block, see included png file. The attributes are indicated by the rectangled text. As you can see the block looks fine, but the leader attaches itself to the insertion point of the block. I want the leader to justify automatically left or right, depending on the drag position of the block. One thing I noticed is that if the block contains an odd number of text lines the leader will automatically self justify. An even number of text line produces what I have here.
View 3 Replies
View Related
Mar 20, 2012
I try to created new multi leader style with custom block but I don't see my block on list.
View 8 Replies
View Related
Sep 27, 2012
I am using Arial font. When I use a multi leader and snap to a line the text is BOLD. How do I change the properties of the multi leader to elevation 0.00 so the text will not be bold. I tried moving the multi leader to a line with elevation 0.00, but it is still bold.
View 1 Replies
View Related
Nov 8, 2011
I have various multi leader styles set up in my drawing. I place a multi leader (arrow and text not seperate mtext) then decided to change it to a different leader style let's say from ML48 to ML96. The problem happens when I try to change it again. It doesn't update to my new multi leader style. Example....from ML96 back to ML48 or any other style. It seems like I only get one opportunity to apply a different style.
View 9 Replies
View Related
Sep 23, 2013
Is there a way to make the box, and thus the ext within the box block out anything behind it on the drawing. Making the boxed text opaque?
This would be real handy in a complicated drawing if the lines, etc. behind a text box on a multileader did not show through the text box.
View 2 Replies
View Related
Mar 19, 2012
I have recently, and reluctantly, purchased LT2012 and have learned to hate it with an unbridled passion. I have a client that uses Acad R14dwg still and when I open their dwg files the multileader style is set to some arbitrary "standard" instead of matching the existing dimstyle of "3-16 Letters" that the file was created with. When editing old files it makes it silly to add a leader and have to create a new multileader style with every single dwg I open. Can it be done once and never be done again for all subsequent dwg files regardless of when they were created? Can it be 'matched' to an existing leader that was created years ago?
For that matter, why did Autodesk pull some dimension leaders OUT of the dimstyle options at all? All dwg files are ONLY in model space, they never use layout or paper space, but that's another topic.
View 3 Replies
View Related
Sep 16, 2013
is there an way to display attribute data using a multi-leader inside a single dynamic block.
To elaborate, I'm trying to create a borehole dynamic block that I can enter the ground level and end of borehole level as attributes, and have them show up in a multi-leader. The reason for the multi-leader is that I can add a background mask to it and it automatically adjusts the length of the outline obox around it.
I just want to insert the borehole block from a tool palette, enter a couple of attributes, stretch the bottom down to whatever level, and I'm done.
I've been playing with it all weekend trying to get fields to show the attributes and I can get it to work if I use another block for the levels (multi-leaders), but even then I have to into the fields an mess with them. It's go to be east so my CAD guys can do it without slowing down, otherwise they may as well carry writing everything out long-hand as they do now.
I'm using Civil 3D 2012, if that matters.
View 4 Replies
View Related
Apr 9, 2013
Is there a way to change attribute properties (ex. text width factor) when the block is inside a multi leader? Double click on it only show the attribute value, not the enhanced attribute editor.
View 2 Replies
View Related
Nov 16, 2012
Is there a way to modify the text insertion point of multileaders using lisp? We have a problem with some of our multileaders getting a landing distance set to a negative value. My lisp routine will correct these to a default value, but then the text jumps a bit. If I could get the insertion point prior to changing the landing distance then I could restore that point after changing the landing distance.
;;-------------------------------------------------------------------------------------------------(defun c:zld (/ e th dogleg doglegllength sf ss c mlss mlcount) (setqss (ssget (ssget "X" (list (cons 0 "MULTILEADER"))))DWATxtHgt (getvar "userr1")sf 1dogleg (/ 3 32.0)th (if dwatxthgt dwatxthgt dogleg)c 0mlcount 0mlss (ssadd)) (IF ss (while (< c (sslength ss)) (setq e (vlax-ename->vla-object (ssname ss c)) c (1+ c) ) (= (vla-get-ObjectName e) "AcDbMLeader") (progn;;change the dogleglength if
[code].......
View 7 Replies
View Related
Feb 15, 2012
I am trying to find a way to control the leader line of a multi-category tag such that the second line of the leader is horizontal - my users are spending too much time to make our leaders look better than "sloppy".
I do have a Keynote family that can accomplish this but I cannot find the same for the multi-category tag. And I cannot find a way to make my Keynote tag a multi-category tag.
View 1 Replies
View Related
Apr 5, 2012
Is there anyway to prevent AutoCAD from converting a MTEXT leader with a block element attached to a BLOCK leader when doing a copy/paste? See screen shot.
2012-04-05 3-09-00 PM.jpg
View 0 Replies
View Related
Jul 17, 2013
I have some difficulty in reversing the text on a leader to the opposite side. As per the picture below, it is on the right side, but I would like to move it to the left. When I drag it, the whole leader goes with it. The text in reference here is the one with ".06 x 45.
View 4 Replies
View Related
Feb 27, 2013
Customizing the leader style further,I’m not sure if the leader style can be further customized to obtain the style shown in the attached screenshot.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
Jul 13, 2013
I want to have a line connecting a block with an attribute, much like how a leader connects text to a basepoint. Is this possible?
I want to make it so that a line is always pointing to the attribute, even if the attribute is moved around.
View 9 Replies
View Related
Jan 23, 2013
I am trying to create a leader that reads the block "name" and then places it into circle, or square at the end of a leader.
I see it in the "other" programs but I have plain ole Autocad.
Should be simple enough except my brain is locked in the clouds and im spinning around in circles.
Which may not be a bad thing, except NASCAR hasnt started yet.
View 1 Replies
View Related
May 21, 2013
how to rotate the architectural tick of a leader line ? I don't use ACAD on a daily basis and have forgotten the command.
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 7 Replies
View Related
Jun 1, 2006
Is there a way to have the Arrow leader convert to Loop leader in one click. Our company standards use diamond tags and sometimes i have to change the arrow to loop by inserting a leader.
View 9 Replies
View Related
