How do I make a leader, no text, no landing, grippers on both ends. Every time I go to grab the gripper on the non-arrow side of the leader it moves away from me . The line just moves away from the pointer at an ever increasing speed and distance).
Just a quick (but possibly hard?) question. I have a multileader set up, but I also want it to automatically include a line which spans the vertical breadth of the text at the end of the landing. It's hard to explain, so I've put an image below.
Currently it's set up as a block that can change in height, depending on how many levels of text I tell it to fit to. Problem is, if I rescale my Multileader, I'll have to go back and rescale the block separately.
Now, possible to include such a feature in a Multileader such that it autoscales and auto lengthens, depending on the height of text?
How to make Multi Leader end line landing or turn 90 degree vertical? I just want to use the leader point to the part and no text at the end of the leader. I guess the only way i know how to do right now is to exploded the M-leader and draw a line vertical down which is not recall proper way . Some people like to use just Leader not Multi leader but i like to use M-leader so i can enter the text in difference line. (See Pic below)
I just upgraded to AutoCAD Lt 2012. In the settings, I was able to figure out how to automatically get a landing line and how long I want it to be. But! When I draw the leader to left of center, it puts the landing on the left side of the line. How can I turn that auto-directional thing off?
I want to force the Multileader landing to go left when the program wants to automatically form it to the right. How can you choose/change the direction of the landing line and side on which the text will be placed.
Is it true that you can't attach an Annotative Block to a MultiLeader?This is the message that I got when trying: "Specify leader arrowhead location or [leader Landing first/Content
first/Options] <Options>: OP Enter an option [Leader type/leader lAnding/Content type/Maxpoints/First angle/Second angle/eXit options] <eXit options>: C Select a content type [Block/Mtext/None] <Block>: Enter block name <DOORTAG>: LEGENDNOTE Invalid Input."
It's unfortunate because I would like the block to show up Annotative in my Legend, and then again to the proper scale with the Multi Leader
I have a road construction ahead sign where I have hatched the background orange (color 30) as a mask since I am using an air photo for the drawing background. The block is fine until I try to use it in a multi leader, then the hatch color switches to block and I can't read the text. The block was created on the same layer as it is inserted. How do I get the orange hatch to show as orange in the multi leader block? See the attached screen shot.
All of my multi leaders (mleaders) worked great in 2012 with the added "extend leader to text" for leaders on the end of a text string, but in 2013, they now attach to the end of the box again.
Some appear as though they are "trying" to extend, but the beginning of the leader without the extension now starts at the end of the box on the FIRST line.
See the attached examples:
Top one - Mleader is on the end of a text box larger than the actual text (NOTE: I have many drawings like this, opening them in 2013 is a nightmare)
Version #2 - Note what the leader does in this example, the "extend to end of text" is the correct length, but it starts at the edge of the box, not the end of the first line of text. Again, this worked fine in 2012.
Version #3 - This is what should happen, only happens if you adjust the text box size. I don't really want to spend my clients money updated dozens of multileaders on hundreds of drawings to force the mleader to work.
I have a multileader with attributed labels in a block, see included png file. The attributes are indicated by the rectangled text. As you can see the block looks fine, but the leader attaches itself to the insertion point of the block. I want the leader to justify automatically left or right, depending on the drag position of the block. One thing I noticed is that if the block contains an odd number of text lines the leader will automatically self justify. An even number of text line produces what I have here.
I am using Arial font. When I use a multi leader and snap to a line the text is BOLD. How do I change the properties of the multi leader to elevation 0.00 so the text will not be bold. I tried moving the multi leader to a line with elevation 0.00, but it is still bold.
I have various multi leader styles set up in my drawing. I place a multi leader (arrow and text not seperate mtext) then decided to change it to a different leader style let's say from ML48 to ML96. The problem happens when I try to change it again. It doesn't update to my new multi leader style. Example....from ML96 back to ML48 or any other style. It seems like I only get one opportunity to apply a different style.
I have recently, and reluctantly, purchased LT2012 and have learned to hate it with an unbridled passion. I have a client that uses Acad R14dwg still and when I open their dwg files the multileader style is set to some arbitrary "standard" instead of matching the existing dimstyle of "3-16 Letters" that the file was created with. When editing old files it makes it silly to add a leader and have to create a new multileader style with every single dwg I open. Can it be done once and never be done again for all subsequent dwg files regardless of when they were created? Can it be 'matched' to an existing leader that was created years ago?
For that matter, why did Autodesk pull some dimension leaders OUT of the dimstyle options at all? All dwg files are ONLY in model space, they never use layout or paper space, but that's another topic.
is there an way to display attribute data using a multi-leader inside a single dynamic block.
To elaborate, I'm trying to create a borehole dynamic block that I can enter the ground level and end of borehole level as attributes, and have them show up in a multi-leader. The reason for the multi-leader is that I can add a background mask to it and it automatically adjusts the length of the outline obox around it.
I just want to insert the borehole block from a tool palette, enter a couple of attributes, stretch the bottom down to whatever level, and I'm done.
I've been playing with it all weekend trying to get fields to show the attributes and I can get it to work if I use another block for the levels (multi-leaders), but even then I have to into the fields an mess with them. It's go to be east so my CAD guys can do it without slowing down, otherwise they may as well carry writing everything out long-hand as they do now.
Is there a way to change attribute properties (ex. text width factor) when the block is inside a multi leader? Double click on it only show the attribute value, not the enhanced attribute editor.
Is there a way to modify the text insertion point of multileaders using lisp? We have a problem with some of our multileaders getting a landing distance set to a negative value. My lisp routine will correct these to a default value, but then the text jumps a bit. If I could get the insertion point prior to changing the landing distance then I could restore that point after changing the landing distance.
;;-------------------------------------------------------------------------------------------------(defun c:zld (/ e th dogleg doglegllength sf ss c mlss mlcount) (setqss (ssget (ssget "X" (list (cons 0 "MULTILEADER"))))DWATxtHgt (getvar "userr1")sf 1dogleg (/ 3 32.0)th (if dwatxthgt dwatxthgt dogleg)c 0mlcount 0mlss (ssadd)) (IF ss (while (< c (sslength ss)) (setq e (vlax-ename->vla-object (ssname ss c)) c (1+ c) ) (= (vla-get-ObjectName e) "AcDbMLeader") (progn;;change the dogleglength if
I am trying to find a way to control the leader line of a multi-category tag such that the second line of the leader is horizontal - my users are spending too much time to make our leaders look better than "sloppy".
I do have a Keynote family that can accomplish this but I cannot find the same for the multi-category tag. And I cannot find a way to make my Keynote tag a multi-category tag.
Is there anyway to prevent AutoCAD from converting a MTEXT leader with a block element attached to a BLOCK leader when doing a copy/paste? See screen shot.
Is there a way to have the Arrow leader convert to Loop leader in one click. Our company standards use diamond tags and sometimes i have to change the arrow to loop by inserting a leader.
C3D 2012 running with 64 bit Win7 all up to date on a capable Dell Precision
I want to add the leader part to the leader that is created when I drag a Station Offset label. This would be the part in a three point leader that goes horizontal for a short distance before the label text begins, similar to how a multi-leader is created. Looks weird having the C3D labels be the only "leadered" noted be without the landing.
When I use qleader with mtext annotation , The arrow and texts are inserted as two unit. I can rember there was a facility to use this two objects as a one unit.
Ok, I'm sure there is a very simple way to fix this that I just haven't yet discovered. When I insert a stacked dimension in the top line of my leader text, the spacing gets automatically adjusted for the hight of the stacked dimension and it adjusts the leader line up so that it actually passes through my top line. Can this be avoided? I have attached a picture for reference.
I would like to add a Leader Text to lable a part- referencing the Part Number or whatever, move the text close to the edge of the part, to remove the leader/arrow and make the txt rotate 90deg to be vertical. I have messed with style settings for a new Vertical Txt style, and Vert Dim style -(pointed to the Vert Txt style and adjusted Notes and Leaders tab)
i don't understand why in the Format Text window the "rotation" box is always grayed out. can you unlock it?
At a multileader when "automatically include landing" is set to "NO" or unchecked, then a small point (like that at the end of a dimension line) is inserted in the callout block, such as the circle, which then prints. This makes for less than clean drafting to say the least--is this normal? If so, (why?!), is there any way to NOT have those points print/show up?
I have a weird issue with Mleader landing lines.In AutoCAD 2012, I get only one arrow grip on mleader landing lines when I select an mleader (see image below) In AutoCAD 2010 - when I open the same exact drawing - I get TWO arrow grips when I select an mleader.
how I keep the three risers shown in the image below, but extend the landings on the first and third run to avoid creating the angled corners. The angled corners show up when I manually edit the edges to bring the second run width down to match the first and third run width.
If I extend the landings, it tends to push one of the second run risers around the corner to the third run, and that screws up my design.
I need to know how to eliminate my first tread being part of the landing. I have tried every possible combination of varibles I can find. It happens randomly. when it does if I adjust anything it comes back.