I just upgraded to AutoCAD Lt 2012. In the settings, I was able to figure out how to automatically get a landing line and how long I want it to be. But! When I draw the leader to left of center, it puts the landing on the left side of the line. How can I turn that auto-directional thing off?
View 4 Replies
how to have an option for the landing direction at the end of a leader line, or a way to edit one that has been created.
View 8 Replies View RelatedI want to force the Multileader landing to go left when the program wants to automatically form it to the right. How can you choose/change the direction of the landing line and side on which the text will be placed.
AutoCAD 2011
How do I make a leader, no text, no landing, grippers on both ends. Every time I go to grab the gripper on the non-arrow side of the leader it moves away from me . The line just moves away from the pointer at an ever increasing speed and distance).
View 9 Replies View RelatedJust a quick (but possibly hard?) question. I have a multileader set up, but I also want it to automatically include a line which spans the vertical breadth of the text at the end of the landing. It's hard to explain, so I've put an image below.
Currently it's set up as a block that can change in height, depending on how many levels of text I tell it to fit to. Problem is, if I rescale my Multileader, I'll have to go back and rescale the block separately.
Now, possible to include such a feature in a Multileader such that it autoscales and auto lengthens, depending on the height of text?
How to make Multi Leader end line landing or turn 90 degree vertical? I just want to use the leader point to the part and no text at the end of the leader. I guess the only way i know how to do right now is to exploded the M-leader and draw a line vertical down which is not recall proper way . Some people like to use just Leader not Multi leader but i like to use M-leader so i can enter the text in difference line. (See Pic below)
1e.jpg
why doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
Is there anyway to prevent AutoCAD from converting a MTEXT leader with a block element attached to a BLOCK leader when doing a copy/paste? See screen shot.
2012-04-05 3-09-00 PM.jpg
I have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.
Here is the string I used for the linetype.
*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12
I have cut several sections at different points along a road alignment. The sections are cut facing the same direction as the alignmnet. Is there a way to reverse the section direction without changing the alignment direction?
View 6 Replies View RelatedIs there a way to have the Arrow leader convert to Loop leader in one click. Our company standards use diamond tags and sometimes i have to change the arrow to loop by inserting a leader.
View 9 Replies View RelatedC3D 2012 running with 64 bit Win7 all up to date on a capable Dell Precision
I want to add the leader part to the leader that is created when I drag a Station Offset label. This would be the part in a three point leader that goes horizontal for a short distance before the label text begins, similar to how a multi-leader is created. Looks weird having the C3D labels be the only "leadered" noted be without the landing.
I have a drawing of a stone railing section and I have to change direction in the run direction of the baluster panel. Is there a way that I can move the details without changing th Y direction of the details. Please refer to the attached CAD file for details. I am trying to avoid having to redesign the panels if possible. railing detail.dwg
View 6 Replies View RelatedWhen I use qleader with mtext annotation , The arrow and texts are inserted as two unit. I can rember there was a facility to use this two objects as a one unit.
View 3 Replies View RelatedI have a path with a smooth point. The two direction points form a direction line with any non-45-degree-angle - say 11.8 degrees. I want to drag one direction point while keeping the angle of exactly 11.8 degrees.
Is there a key combination for that (Mac OS)?
I have an mleader with a single vertices point.
There's a thing called a doglength which enables a grip point that allows the leader to be repositioned.
Dim ml As MLeader = TryCast(Entity, MLeader)
ml.SetDatabaseDefaults()
m_leaderIndex = ml.AddLeader()
m_leaderLineIndex = 0
ml.SetDoglegLength(m_leaderLineIndex, 2.5)
I have a problem with the dogleg length in that I can't rotate it according to the current UCS. Is this possible?
Ok, I'm sure there is a very simple way to fix this that I just haven't yet discovered. When I insert a stacked dimension in the top line of my leader text, the spacing gets automatically adjusted for the hight of the stacked dimension and it adjusts the leader line up so that it actually passes through my top line. Can this be avoided? I have attached a picture for reference.
View 4 Replies View RelatedI would like to add a Leader Text to lable a part- referencing the Part Number or whatever, move the text close to the edge of the part, to remove the leader/arrow and make the txt rotate 90deg to be vertical. I have messed with style settings for a new Vertical Txt style, and Vert Dim style -(pointed to the Vert Txt style and adjusted Notes and Leaders tab)
i don't understand why in the Format Text window the "rotation" box is always grayed out. can you unlock it?
what the difference is between the landing and a dogleg of a mleader? What is the difference between the properties:
EnableDogleg
DoglegLength
EnableLanding
LandingGap
At a multileader when "automatically include landing" is set to "NO" or unchecked, then a small point (like that at the end of a dimension line) is inserted in the callout block, such as the circle, which then prints. This makes for less than clean drafting to say the least--is this normal? If so, (why?!), is there any way to NOT have those points print/show up?
View 7 Replies View RelatedI have a weird issue with Mleader landing lines.In AutoCAD 2012, I get only one arrow grip on mleader landing lines when I select an mleader (see image below) In AutoCAD 2010 - when I open the same exact drawing - I get TWO arrow grips when I select an mleader.
View 2 Replies View Relatedhow I keep the three risers shown in the image below, but extend the landings on the first and third run to avoid creating the angled corners. The angled corners show up when I manually edit the edges to bring the second run width down to match the first and third run width.
If I extend the landings, it tends to push one of the second run risers around the corner to the third run, and that screws up my design.
I need to know how to eliminate my first tread being part of the landing. I have tried every possible combination of varibles I can find. It happens randomly. when it does if I adjust anything it comes back.
View 4 Replies View RelatedIn 2010, when you did a multileader, on the landing you had an arrow grip on both ends and then the box grip in the middle.. Now in 2012 they have the landing set to where there is an arrow grip at one end closest to the text and the box grip at the other end....
Is there any way to set the multileader grips on the landing in 2012 the way they were set up in 2010?
I'm having a frequent but random problem with Multileaders where the landing distance will change on its own from its initial standard 1/8 inch to some relatively large negative distance which also causes the landing to disappear altogether. If I use the move trick for resetting all elevations to zero (Move 0,0,10e99 then 0,0,10e-99) the landing will reappear connecting the landing grip at the strange negative offset.
The problem seems only to happen when the leader is connected to the bottom right of the note.
When I remove the leader and add a new leader it appears correct but as soon as I save the drawing the affected Multileaders will again present this problem.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
I am having a problem adding a top landing to an external staircase. see below image.
Every time i try and add the top landing i either get boundary error messages or railings surround top landing.
how to create awesome landing page in adobe edge animate cc..and awesome circule count town timmer.
View 1 Replies View RelatedI'm having quite a bit of trouble with achieving a desired effect with CC Page Turn
I'm attempting to make it look as if an open books page is being turned with the centre of the book acting as the Page Turns limit.
When I pull the fold position out fully the page lands way out, I've toyed around with the layers anchor point, and adjusting keyframes of CC Page Turn halfway but no success.
I've included a quick gif to indicate where all is going wrong. I basically want the page to land flush on the left side
I can't believe that in Acad 2006 there's no way to scale an object in one direction only e.g. in x direction scale = 1.15, in y direction scale unchanged i.e 1.0. Mstation does it - surely there must be at least a workaround in Acad?
View 9 Replies View RelatedI am now using Autocad 2010, but cant find the "LEADER".
View 9 Replies View RelatedHow to make a type of material go in one direction or by another degree . Ex: if you click on a wood type material, it goes up or down and right or left depending which side of that object is. On the picture below, it goes up and down, side to side no all sides go in one direction. I need to know how to mange the direction of the way of where the material go.
View 7 Replies View Related
