I'm have a long span of conduits in this tunnel and need to label each of the conduits its 3-4 digit assignment in each viewport of each page. I made a center line to each of these conduits in the layer named that 3-4 digit code (ex, Centerline of ET23 is in layer ET23).
way to make a leader that will just tell me the layer of the object (centerline) I attach it to? Or any way to label the layer of an object?
C3D 2012 running with 64 bit Win7 all up to date on a capable Dell Precision
I want to add the leader part to the leader that is created when I drag a Station Offset label. This would be the part in a three point leader that goes horizontal for a short distance before the label text begins, similar to how a multi-leader is created. Looks weird having the C3D labels be the only "leadered" noted be without the landing.
I am having problems plotting out parcels and creating label settings. I think I am missing an important concept in the object and display tab of setting creation. I am not finding going through the documentation. What I have found is not well explained.
I started with the OOB alignment settings. I noted that the Basic setting has a description that states the object will take on the settings of the layer it is created on.
I noted that if I adjusted the alignment properities to "Basic". I could then move the 'roadway' alignments to P-RD-CL and the swale alignments to P-SWALE-CL. Freezing the P-SWALE-CL then turns off the swale CL's, but keeps the roadway ones on.
I am looking for a fast way to determine which styles this works for or the area of the documentation that better explains how this works.
I am starting to explore creating label styles the same way. That way I can double or triple label pipe networks such that identical styles are labeled on an E&S layer and a PCSM layer and the individual lables can be dragged on the two different sheet layouts in the same file to avoid text over writes.
Please see attachment. There are two structure label styles in the attachment. The one on the bottom has the leader attached to the edge of the structure and the one on the top has the leader attached to the centre of the structure. How do I change the attachment point for the top label so the leader attaches to the edge of the structure as the bottom label does? Can't seem to find the parameter to change??
View 3 Replies View RelatedI do not want the leader and label to flip. Is there a setting to keep the leader and label on one side? When I drag the left to a certain point the right note is the result. I want the bottom note to be the result.
View 5 Replies View RelatedI have a leader that I do NOT want to explode with text at the end of it. Problem is, I need the leader part to be on a layer with a certian line type and a certain layer and I need the text on a different layer. How is this possible!? Also, I have AutoCad LT if that makes a difference (no express tools for example).
...Maybe some way to create a new text style that is linked to a certain layer since that is the only option in the props for the leader that seems like it would control that...?
I created this label for my pipe crossing. I want to be able to start the vertical line at the invert, and be able to move the text up and down and have the line adjust.
Currently my dragged state has the arrow head size as 0 and visibility as false, since it starts the leader at the centerline of the pipe. But without using the leader, I cannot adjust the vertical line dynamically.
Is there anyway to prevent AutoCAD from converting a MTEXT leader with a block element attached to a BLOCK leader when doing a copy/paste? See screen shot.
2012-04-05 3-09-00 PM.jpg
I have a customized button to draw an ‘ac-arrow’. I created a lisp to create the layer “G-ANNO-LEDR”
if the layer name is not found. The advanced part I would like is:
Current layer: E-ANNO-WIRE
Ac-Arrow Leader: G-ANNO-LEDR
OPTION 1:
If, say I am on current layer “E-ANNO-WIRE” and need to draw my “ac-arrow” leader, and continue working
on the original layer “E-ANN-WIRE” (and have the leader be drawn [remain] on the layer “G-ANNO-WIRE”).
With this option, I have the block “ac-arrow” imbedded in my template drawing file to have the block at hand.
With this option, the layer “G-ANNO-LEDR” will be created IF it is not on the drawing.
OPTION 2:
- Currently be on layer “E-ANNO-WIRE”
- Bring in the block “ac-arrow” from my block library “L:AutoCADSymbols”
- Draw the “ac-arrow” leader which will be on layer “G-ANNO-LEDR” (this layer created IF it is not
on the current drawing).
- After the leader is drawn’
- Be put back to the layer I was, “E-ANNO-WIRE”, and continue working.
The OPTION 2 is what I would really like to have. A while back, I happen to see one like OPTION 2, but I cannot
find it anymore on the users groups. I have been searching for a while now.
Currently, I use the button in my customized toolbar (see image) and have to have the “ac-arrow” block in my drawing and have its layer created in the drawing.
I have dragged station offset and multileaders next to each other in the drawing. Everything is set to go on the same layer. I am using named (stb) plot styles. The layer's lineweight is set to .25mm. However, I usually make the leaders be lighter in weight - .13mm. I am using text borders on both of these objects.
I can't get both the text and border to be the same in both objects unless I set everything to Bylayer. Given that I want lightweight leaders, and heavier text, this is unnacceptable.
It seems that the StaOff label style text and border weight in DRAGGED state are controlled by one lineweight setting.
In a multi leader, the text weight is always, apparently, Bylayer, and the text border is controlled by the lineweight set for the leader.
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
My dragged state leader does not display properly. The attachment runs through my first line of text. My display is set to "As Composed" I do not want the stacked text setting.
View 9 Replies View RelatedI have created a leader from a block and I need to have that leader automatically insert data from an object. I have tried several attempts with a the FIELD command, but to no avail.
View 1 Replies View RelatedIn AutoCAD 2009 is there a way to make a leader line change color with per the layer it is on?
View 3 Replies View RelatedIf I drag an effect from the target circle of one object to anther in the layer's panel it replaces the effect along with all appearance. But I want just to add the effect. For example, a layer has a drop shadow and a path, round corners. I want to move the drop shadow from the layer to the path so that the path now has the round corners and the drop shadow. To do this I have to open the shadow effect of the layer wright down its parameters, then create a shadow effect for the path with the same parameters which is a lot of work.
View 3 Replies View RelatedIs there a way to have the Arrow leader convert to Loop leader in one click. Our company standards use diamond tags and sometimes i have to change the arrow to loop by inserting a leader.
View 9 Replies View RelatedWhen I use qleader with mtext annotation , The arrow and texts are inserted as two unit. I can rember there was a facility to use this two objects as a one unit.
View 3 Replies View RelatedAny way to label the elevation of an object where it is picked? For example, I'd like to be able to pick on the node of a feature line or 3D polyline (or any object really) and have a label placed that displays the elevation of the object at the point where it was picked. This could appear similar to the surface spot elevation label, but instead of getting it's elevation from a surface, it would come from the object where picked.
Alternatively, any way to create a label style, perhaps using the Note label, to display something like this? I don't even care if it is dynamic or not, static would be fine. However, I do need it to scale innovatively . Tool Pac has a feature that does this, but the label is just a polyline and text that is not annotative.
I use the same label style for multiple objects (surfaces) with different layers (i.e. Concrete, Pavement, etc.) I have the label style set to Layer 0, to take on the layer properties I want the label on. When I insert a label, it defaults to Layer 0, then I have to change it's layer. Is there a way to insert a label on the current layer?
View 4 Replies View RelatedI'm working in 2011. Just labeling some contours in a new drawing, using the 'Multiple' setting. I found I could only draw one tangent of Contour Label Line. If I continued, I could click but no labels were created and on finishing the command I could see that those clicks had been ignored. What gives?
I found that the labels were on the current layer, instead of the layer they're meant to use.I also realised that my current layer was locked (from the previous task).
if the current layer is locked, the contour labels ignore the layer setting that they are meant to use, and come in on the current layer instead. And you can only draw one tangent's worth of contour labels at a time before finishing the command and restarting.
Solution: make a different layer current or unlock your layer.
are contour labels generally created on the current layer and then moved to their proper layer?Is that why it hit a snag: it wasn't permitted to move the object to a different layer because the one it was on was locked?
lisp..It work fine but just that i need some minor modificatio to it...At moment, when i activate the lisp, it will automatic select all dimension,leader and multileader to a layer call "DIMENSION"...Anyway i wonder if it is possible to prevent any dimension,leader or multileader in layer "Section" will not be change to layer "Dimension"?
View 2 Replies View RelatedI am using Description Keys for all my points that I bring in from surveying in the field. Any point that does not have a specific descriptor key ends up on a specific layer with a specific style that I cannot figure where to set. I have gone through my point default settings as stated in other postings but all seem to be set correctly mostly to <none>. I have gone through my Point Group settings without finding the culprit either. I can easily change the settings as I only have a few points that do this but I want to find the issue.
View 6 Replies View RelatedUltimately I want to delete a bunch of Layers by selecting them using a portion of their name. Is there anything in cad that allows you to specifically select layers using only a portion of the layer name?
Based on AutoCAD Layer Standards: Users label layers with a code; for example: A-ANNO-TEXT
A - Stands for the Architectural Category the layer falls into
ANNO - Stands for Annotation
TEXT - Type of Annotation
I want to use the Layer Delete (-LAYDEL) command to delete all layers that begin with A-ANNO. In the Layer Manager (-LAYER) I am able to select specific layers using a " * " placed before and/or after " A-ANNO " to include all layers with that in its name.
When I write a script however (-LAYDEL); cad will ask me for the layer name, but will not allow me to use the *A-ANNO* to include all layers with that name: A-ANNO-TEXT, A-ANNO-GLAZ, A-ANNO-WALL, etc...
Is there anything in cad that allows you to specifically select layers using only a portion of the layer name??? I have to "taylor" drawings that I receive from companies who's layers may vary.
My script is in basic (NON LISP) language:
-LAYDEL
N
A-GENM
N
A-DOOR
N
A-DOOR-FRAM
N
A-DOOR-GLAZ
N
Y
how do you change their layer? i have been through the settings tab under "alignment", "station offset". i also right clicked on one and went through the properties.
View 4 Replies View RelatedOk, I'm sure there is a very simple way to fix this that I just haven't yet discovered. When I insert a stacked dimension in the top line of my leader text, the spacing gets automatically adjusted for the hight of the stacked dimension and it adjusts the leader line up so that it actually passes through my top line. Can this be avoided? I have attached a picture for reference.
View 4 Replies View RelatedI would like to add a Leader Text to lable a part- referencing the Part Number or whatever, move the text close to the edge of the part, to remove the leader/arrow and make the txt rotate 90deg to be vertical. I have messed with style settings for a new Vertical Txt style, and Vert Dim style -(pointed to the Vert Txt style and adjusted Notes and Leaders tab)
i don't understand why in the Format Text window the "rotation" box is always grayed out. can you unlock it?
I'm trying to open an .ai file in Illustrator CS6. I get an error message "Acrobat PDF File Format is having difficulties. Object label badly formatted" I have tried recovery mode and running recovery scripts to no avail.
I won't open or place in any other software. I can; however, see a preview in Bridge.
I'm not using any fonts software and there are no fonts present in the document. The file contains a lot of gradient mesh and a photo (.jpg, placed)
I've figured out how to wrap a label around a cylinder using a 3D Photoshop layer but what I can't figure out is what ratio and size that label needs to be.
For example I have a cylinder and have loaded the texture from the Photoshop document into the Opacity section in the Properties tab but rather than it being in proportion with the cylinder it seems to stretch it. So have to edit the label document and squash the actual label, which I know is not the correct way of doing it.
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedWe use electircal elements in AutoCAD dwgs that have labels to indicate the status of the element by phase. For instance on a floor plan we might have elctrical outlets that are existing (E), new (N), demo (D), etc. How does one do this efficietnly in REVIT? Is there a way to assign a paramter to grab the phase of the object and then adjust a label accordingly? This would be ideal because over time the element s might move from one phase to another such as from new to existing.
View 2 Replies View RelatedC3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View Related