AutoCAD Civil 3D :: Cut And Fill Report
Dec 1, 2013I would ask a question about the Cut and Fill Volumes reports in Civil 3D.
View 3 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Why The Cut / Fill Numbers Are All At Zero In Report
Jun 26, 2012why the "cut/fill" numbers are all at zero in my report? All the offsets and the design elevations show just fine....
View 9 Replies View RelatedAutoCAD Civil 3D :: Corridor Cut / Fill Volume Report?
Jul 11, 2013I have created surfaces for my original ground and my corridor. Both have appropriate boundaryies and the TIN looks good for both. I am trying to create a volume report through Volume Dashboard. I am able to create the volume surface with no issues but the numbers it comes up with do not seem correct. I can see from my profile that there is a small fill but the software seems to create a fill that is almost half of all the material when my profile shows there is more cut.
I tried creating a sample line group...it also shows the majority is cut. The only thing I can think is that there are about a dozen areas where my daylight does not work. how to do this volume correctly?
AutoCAD Civil 3D :: Map Check Report
Mar 8, 2012I'm need to make a Map Check report on C3D2011, but I don't know how to do it. Since C3D everything have to be setup before it can be use, so my questions are: How do I setup map check? Or What do I need to do get map check report?
What are the steps to do it right?
AutoCAD Civil 3D :: How To Make TXT Report
Feb 29, 2012I import a survey data (X,Y,Z) in civil3D and make an horizontal alignment near them. I want reference theses survey points to my new alignment by a .txt report (#pts CH. OS elevation). Is it possible?
View 3 Replies View RelatedAutoCAD Civil 3D :: How To Report Material
Nov 22, 2013Setting up my first press parts list and already I'm regretting it...
How do we report material? Lower case letters spelling ductile iron is not acceptable in this office. How to I edit this to be 'DI' or anything else? I have looked in the press part catalog editor or whatever it's called and did not see a way to add to the list of all lower case materials.
Do I have to rely sole on part description for material in labels? ....and why do they still think that no one needs to use the " symbol with these parts? Freakin crashing all morning tring to get this going...
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
AutoCAD Civil 3D :: Custom Parcel Report
Oct 24, 2012I copied the General Legal Description report and renamed it. When I ran the report, it asked me to save the file Civil.html before opening it. If I run the OOTB report it does not ask me to save the page before opening it. Is this something that I can fix? I have not found a setting anywhere that changes this.
View 1 Replies View RelatedAutoCAD Civil 3D :: Report Generator Tab Missing?
Mar 20, 2012I'm missing the tab in my tool space that has the report generator in it. What command brings that tab back?
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Modify Volume Report
Sep 13, 2013I would like to re-format the way volume reports are displayed, for example I don't need the cut area or reusable volume columns or I'd like to change the Cu.m. dimensional to something like m3.
View 5 Replies View RelatedAutoCAD Civil 3D :: Alignment Report With Radials?
Sep 13, 2012Is there a way to included the radial bearings of curves for alignment reports generated for the report manager? I know the curves are tangent because I made them so, but the guy checking my report for errors doesn't know that. I don't know any xml.
View 1 Replies View RelatedAutoCAD Civil 3D :: Editing The XSL Report Functions
Oct 9, 2013Civil 3D 2013.
First prize for me would be to be able to access Parcel boundary vertices via managed dot net.
I could not find the boundary property of the Parcel object.
It looks like developers can access Parcel vertices via COM, in the Loops property of Parcels.
So, it is possible to combine the two to get what I need.
Then I turned to the Report facility. The METESBOUND XSL iterates Parcel segments but provides the distance and bearing instead of the vertices. I was hoping to get to the bottom of the linked code to edit it and produce the vertices output. But - I failed again. Cannot see how the XSL files get to the data needed.
Is there maybe a book or comprehensive reference on the XSL files that provide the reporting function?
AutoCAD Civil 3D :: How To Create Custom Report
Nov 20, 2013how can i create custom report ?
View 7 Replies View RelatedAutoCAD Civil 3D :: Slope Stake Report
May 27, 2011Is it possible to create a Slope Stake Report for multiple baselines?. When I generate the report, it only creates a report for the first baseline of the corridor. All of my sample lines are in the same section group, so I'm wondering why it would not create all my sampled stations.
View 7 Replies View RelatedAutoCAD Civil 3D :: Horizontal Curves Report
Jun 5, 2013how to get the Horizontal Curve Report saying left / right curve details in autocad civil 3d
View 2 Replies View RelatedAutoCAD Civil 3D :: Get Super Elevation Report?
Aug 21, 2013how to get Super Elevation report for superelevation value at every point separated
View 2 Replies View RelatedAutoCAD Civil 3D :: Get A Report For Alignments Definition Data?
May 2, 2013I need to include the data definition for 120 elements . I'll insert it at a word report.
Civil 3D (2013)
AutoCAD Civil 3D :: Corridor Section Points Report
Feb 23, 2012When creating a Corridor Section Points Report using the Toolspace>Toolbox>Reports Manager in Civil 3D 2012, the stations get listed but only a few contain point information (see attached).
I am trying to generate stake-out data for a proposed road. I was able to get this report to work successfully in one of the Civil 3D tutorials, so I assume that nothing is wrong with the utility. The problem may be related to my corridor.
AutoCAD Civil 3D :: Alignment PI Station Report Settings?
Feb 1, 2012I am trying to export an Alignment PI Station Report. I've set all the settings I can find to round coordinates to 4 decimal places, Distance to 2 decimal places, and Direction to the nearest second (DMS). When I execute the PI Station Report, the Distance is 3 decimal places and the Direction is to the nearest 100th of a second. how to get these to the correct decimal place? I managed to change them to the correct decimal place for a Station & Curve Report, but not for the PI Station Report. Also, for the Northing/Easting coordinates, I want to remove the commas (for example, a Northing of 3,058,715.3774' should read 3058715.3774').
View 4 Replies View RelatedAutoCAD Civil 3D :: Point Of Intersection Alignment Report?
Jul 6, 2012I want to generate Civil 3D point of intersection alignment report including following columes.
PI Row station
Delta Angle
PI Includead Angle
Is this possible?
AutoCAD Civil 3D 2012 SP 2
AutoCAD Civil 3D :: XML Inverse Report Angle Precision?
Jul 23, 2010My parcel inverse reports from the Toolbox Report Manager are still coming in with the bearings having decimal seconds to 3 places (N 0-00-00.000 E). I have already changed the variable for angle precision to zero in the "General_Formating_JScript" xsl file but it's still not coming out correctly. Is there any other file that holds an additional angle or bearing precision setting?
View 4 Replies View RelatedAutoCAD Civil 3D :: Customizing Pipes And Structures Report
May 24, 2012I am attempting to customize a Pipes and Structures report but am having difficulty changing the % slope column to run over rise.
View 2 Replies View RelatedAutoCAD Civil 3D :: Parcel Map Check Report ERROR
Jun 21, 2012i am trying to do a print out of our lots within our proposed plat & need to do indivial closure reports for each lot. when i try an run a report i get Error - Invalid execute file.ive added new .dll files that I got off the net but they do not work either. which are located at C3D 2011/enu/Data/Reports/Net.
View 2 Replies View RelatedAutoCAD Civil 3D :: Duplicate A Feature Line Report?
Apr 17, 2013I am trying to duplicate a feature line report I did a while ago. It has offsets,elevations,eastings and northings. What I would like is the offsets shown. I am in toolbox, reports manager, corridor, Feature Line Reports. When I create a report I get the list of feature lines which shows point codes which are back_curb,etw,...etc. When I create the file, all I get are the point code such as Back_Curb Left which shows the station, easting, northing and elevation. How do I get those offsets?
View 2 Replies View RelatedAutoCAD Civil 3D :: Land XML Report Bearing Format
Dec 20, 2013I am trying to find where the formatting is for the General Legal Description bearings. I am currently getting an output of NORTH 00° 12' 33" EAST, but would like to eliminate the spaces in the DMS: NORTH 00°12'33" EAST. This is also the case with the delta angle for curves. When I run the Metes and Bounds report, the bearings appear without the spaces. I think that I have changed it before, but I have switched employers since editing the files.
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Get Overall Span Distance To Report Correctly
Apr 28, 2010I have no problems labeling parcel lines but am having issue with overall spanning labels. For example, the crows feet are showing at the beginning and end of a subdivision property line but the distance is incorrect. I found that that distance shown correlates back to the parcel segment picked not the overall subdivision property line. How to get the overall span distance to report correctly?
View 9 Replies View RelatedAutoCAD Civil 3D :: Horizontal Geometry Curve Report
Jun 5, 2013How to get the Horizontal Curve Report saying left / right curve details in autocad civil 3d.
View 1 Replies View RelatedAutoCAD Civil 3D :: Corridor Section Points Report
Dec 27, 2013I have a problem with the corridor section points report on Civil 3d 2014. It only presents the first station on the corridor.
Attached image.
AutoCAD Civil 3D :: Incremental Station Elevation Difference Report
Nov 18, 2013I need to conceive a Incremental Station Elevation Difference Report (Toolspace - Toolbox) where each station is worth 20 meters. But I don't know how to set C3D 2013?
View 2 Replies View RelatedAutoCAD Civil 3D :: Exporting Volume Dashboard Report From IE To Excel
Apr 9, 2013Just trying to bring in a Volumes Dashboard report from IE10 to Excel 2010 (it all worked fine until I my PC was upgraded from IE9/Excel 2007)
When the report is in IE10, I Select All and paste to Excel (as I always have done) and the numbers are not recognised as numbers (there is no convert text to numbers prompt) and seem to have a leading space which Find/Replace can't find and replace.
If I right click in IE10 and Export to Excel, most of the exported data has a weird character preceding it (but which can be found and replaced). What this character is and how to stop it appearing?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCAD Civil 3D :: Station Offset Report By Point Group?
Feb 2, 2012I am trying to use the Station Offset to Points report from the Reports manager. Currently, as far as I ca see, there is no way to select a group of points to include, either by point group or selection from the drawing. There is only "Select All' or "Deselect All". I want a report that will show the station, offset, raw or full description and elevation of a group of points related to an alignment/street. I don't see that option.
View 2 Replies View RelatedAutoCAD Civil 3D :: Slope Stake Report Missing Stations?
Jan 18, 2013I have created a slope stake report and have just noticed that there are stations missing. The stations are there in the cross secitons but not there in the slope stake report.
All sample lines were created at the same time. All surfaces are present throughout the entire cooridor.