AutoCAD Civil 3D :: Horizontal Geometry Curve Report
Jun 5, 2013How to get the Horizontal Curve Report saying left / right curve details in autocad civil 3d.
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Horizontal Curves Report
Jun 5, 2013how to get the Horizontal Curve Report saying left / right curve details in autocad civil 3d
View 2 Replies View RelatedAutoCAD Civil 3D :: Expression In Horizontal Geometry Point
Aug 9, 2013I'd like to label profile elevations at horizontal geometry points. I accomplished this with a profile reference. Essentially labeling bottom of curb at pc, pt, mid, and pi, and would like to get and expression to add the top of curb, but under hor. geo style expressions you cannot pickup pgl data and PGL style expression are not loaded in the hgp data.
Note: Its all Resistentialism, so keep calm and carry on 64 Bit Win7 OS.
AutoCAD Civil 3D :: Profile View Horizontal Geometry Bands
Sep 9, 2013I'm using C3D 2012. I created a profile view for a straight horizontal alignment. The band label for the horizontal won't appear for this particular straight aligment. I have a few other alignments that has curves in it and the profile view displays the labels fine.
I tried to create a new straight alignment again, create a profile view but I get the same results.I also tried it on a new drawing using the NCS metric template with same results.
I can think of (if this is a bug) is to extend my alignment by say 0.1m and add a new IP at the correct alignment end, mask that on plan and end my profile view to the right length.
AutoCAD Civil 3D :: Horizontal Geometry Text Made Draggable?
Dec 14, 2012My profile style settings are great but my Horizontal Geometry Text is overlapping. I want to be able to drag the text to keep it legible. Simlar to PI and PB labels on the horizontal alignment.
View 1 Replies View RelatedAutoCAD Civil 3D :: Profile Setup - Anchored To Horizontal Geometry From Certain Point
Sep 26, 2012is there a way to set up the profile so it is anchored to horizontal geometry from certain point. that way when i change the alignment in the middle it won't cause profile to be shifted because station changes (length changed) while the vpi stations stay the same as before.
i can make a program in .net to specify a station and move all the vpi station by that amount which can be obtained easily by taking the length before you modify minus length after you modify.
Pretty common problem. it's not that hard to do in really the logic is defined. i have this alignment that's 60km long that's only one portion. hecka lots of horzontal curve and vertical curves. over 100.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
AutoCAD Civil 3D :: Change Radius To Degrees In Horizontal Geometry Band Set Profile
Sep 25, 2013How to set change the radius to degrees in horizontal geometry band set profile.
View 2 Replies View RelatedAutoCAD Civil 3D :: Custom Horizontal Curve Table
Sep 29, 2012Can we produce a Horizontal curve table like the attachment Table 1 and i have another queries could Civil 3d Produce a table like the attachment Table 2 i know i can get this table by lisp or macros.
View 2 Replies View RelatedAutoCAD Civil 3D :: How Deflection Angle Can Be Shown In Horizontal Alignment Curve
Jul 31, 2013How the deflection angle can be shown in the horizontal alignment curve? I’m wondering if there is a way to automatically show the deflection angle of the horizontal alignment curve (attached)?
View 3 Replies View RelatedAutoCAD Civil 3D :: How To Construct A Table To Layout Horizontal Curve On The Ground
Sep 18, 2012How to construct a table to lay out the "horizontal curve" on the ground?
The steps that follow the design of the horizontal alignment is to set up it on the ground. For this purpose a table that contains angles and distances is established to set up the curve on the ground. How this process is performed on the C3D.
AutoCAD Civil 3D :: Error 607 / Inlet A9 Gutter Capture Curve Is Not A Valid Curve
Dec 31, 2013I have ran an analysis and SSA gave me Error 607 on the report. It says "Inlet A9 gutter capture curve is not a valid curve."
A couple things I did different from the video lectures...
I selected user define for the Tc to figure out Q. i computed those manually.
For the Inlets I have selected Maximum Capture Cutoff.
There are some inlets in this model I created that do not capture 100% of the flow so i created conveyance links to account for the bypass flow.Not sure why is not recognizing the Curve?
Maya Animation :: Constraining Curve Points To Geometry?
Apr 20, 2012How can I make a curve's end points constrain to objects in order to create a "theta" angle line that changes dynamically when the angle between the two objects changes?
I thought they answer may have lay in creating the curve using Maya's new Bezier Curve tool, then using the Rivet plug-in from CreativeCrash to pin it to the middle of two poly cylinders (the "x" and "y" axis.) Unfortunately this doesn't work; the Script editor spits back "is not a vertex!". Either I'm not using Rivet correctly or the end points of a Bezier Curve in Maya are not the same as a CV Curve. But perhaps I'm going about this the wrong way entirely.. I ultimately would wish to extrude geometry about this curve to create a dynamically changing curved cylinder to visualize the angle. It seems like it should be a relatively simple thing to do...
Illustrator :: Horizontal Lines Which Didn't Follow Curve Of Stratum
Jan 8, 2013There is a brick-like pattern on a geological cross section I could draw this in manually but any way to do it automatically so there is a uniform horizontal distance between vertical separators? I tried creating a brick type swatch, but this created horizontal lines which did not follow the curve of the stratum.
View 12 Replies View RelatedMaya Modeling :: Merge CV Created Curve Geometry Into Solid Piece?
Sep 15, 2011I have traced out this piece of geometry using CV curve and then used loft to convert the Curves into actual geometry. I need to have one solid piece of geometry to project an image onto, how can I convert this to one solid piece? I have attached my .mb file.horro_chair.mb.zip
View 3 Replies View RelatedAutoCAD Civil 3D :: Map Check Report
Mar 8, 2012I'm need to make a Map Check report on C3D2011, but I don't know how to do it. Since C3D everything have to be setup before it can be use, so my questions are: How do I setup map check? Or What do I need to do get map check report?
What are the steps to do it right?
AutoCAD Civil 3D :: Cut And Fill Report
Dec 1, 2013I would ask a question about the Cut and Fill Volumes reports in Civil 3D.
View 3 Replies View RelatedAutoCAD Civil 3D :: How To Make TXT Report
Feb 29, 2012I import a survey data (X,Y,Z) in civil3D and make an horizontal alignment near them. I want reference theses survey points to my new alignment by a .txt report (#pts CH. OS elevation). Is it possible?
View 3 Replies View RelatedAutoCAD Civil 3D :: How To Report Material
Nov 22, 2013Setting up my first press parts list and already I'm regretting it...
How do we report material? Lower case letters spelling ductile iron is not acceptable in this office. How to I edit this to be 'DI' or anything else? I have looked in the press part catalog editor or whatever it's called and did not see a way to add to the list of all lower case materials.
Do I have to rely sole on part description for material in labels? ....and why do they still think that no one needs to use the " symbol with these parts? Freakin crashing all morning tring to get this going...
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
AutoCAD Civil 3D :: Custom Parcel Report
Oct 24, 2012I copied the General Legal Description report and renamed it. When I ran the report, it asked me to save the file Civil.html before opening it. If I run the OOTB report it does not ask me to save the page before opening it. Is this something that I can fix? I have not found a setting anywhere that changes this.
View 1 Replies View RelatedAutoCAD Civil 3D :: Report Generator Tab Missing?
Mar 20, 2012I'm missing the tab in my tool space that has the report generator in it. What command brings that tab back?
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Modify Volume Report
Sep 13, 2013I would like to re-format the way volume reports are displayed, for example I don't need the cut area or reusable volume columns or I'd like to change the Cu.m. dimensional to something like m3.
View 5 Replies View RelatedAutoCAD Civil 3D :: Alignment Report With Radials?
Sep 13, 2012Is there a way to included the radial bearings of curves for alignment reports generated for the report manager? I know the curves are tangent because I made them so, but the guy checking my report for errors doesn't know that. I don't know any xml.
View 1 Replies View RelatedAutoCAD Civil 3D :: Editing The XSL Report Functions
Oct 9, 2013Civil 3D 2013.
First prize for me would be to be able to access Parcel boundary vertices via managed dot net.
I could not find the boundary property of the Parcel object.
It looks like developers can access Parcel vertices via COM, in the Loops property of Parcels.
So, it is possible to combine the two to get what I need.
Then I turned to the Report facility. The METESBOUND XSL iterates Parcel segments but provides the distance and bearing instead of the vertices. I was hoping to get to the bottom of the linked code to edit it and produce the vertices output. But - I failed again. Cannot see how the XSL files get to the data needed.
Is there maybe a book or comprehensive reference on the XSL files that provide the reporting function?
AutoCAD Civil 3D :: How To Create Custom Report
Nov 20, 2013how can i create custom report ?
View 7 Replies View RelatedAutoCAD Civil 3D :: Why The Cut / Fill Numbers Are All At Zero In Report
Jun 26, 2012why the "cut/fill" numbers are all at zero in my report? All the offsets and the design elevations show just fine....
View 9 Replies View RelatedAutoCAD Civil 3D :: Slope Stake Report
May 27, 2011Is it possible to create a Slope Stake Report for multiple baselines?. When I generate the report, it only creates a report for the first baseline of the corridor. All of my sample lines are in the same section group, so I'm wondering why it would not create all my sampled stations.
View 7 Replies View RelatedAutoCAD Civil 3D :: Get Super Elevation Report?
Aug 21, 2013how to get Super Elevation report for superelevation value at every point separated
View 2 Replies View RelatedAutoCAD Civil 3D :: Get A Report For Alignments Definition Data?
May 2, 2013I need to include the data definition for 120 elements . I'll insert it at a word report.
Civil 3D (2013)
AutoCAD Civil 3D :: Corridor Section Points Report
Feb 23, 2012When creating a Corridor Section Points Report using the Toolspace>Toolbox>Reports Manager in Civil 3D 2012, the stations get listed but only a few contain point information (see attached).
I am trying to generate stake-out data for a proposed road. I was able to get this report to work successfully in one of the Civil 3D tutorials, so I assume that nothing is wrong with the utility. The problem may be related to my corridor.
AutoCAD Civil 3D :: Alignment PI Station Report Settings?
Feb 1, 2012I am trying to export an Alignment PI Station Report. I've set all the settings I can find to round coordinates to 4 decimal places, Distance to 2 decimal places, and Direction to the nearest second (DMS). When I execute the PI Station Report, the Distance is 3 decimal places and the Direction is to the nearest 100th of a second. how to get these to the correct decimal place? I managed to change them to the correct decimal place for a Station & Curve Report, but not for the PI Station Report. Also, for the Northing/Easting coordinates, I want to remove the commas (for example, a Northing of 3,058,715.3774' should read 3058715.3774').
View 4 Replies View RelatedAutoCAD Civil 3D :: Point Of Intersection Alignment Report?
Jul 6, 2012I want to generate Civil 3D point of intersection alignment report including following columes.
PI Row station
Delta Angle
PI Includead Angle
Is this possible?
AutoCAD Civil 3D 2012 SP 2