AutoCAD Civil 3D :: Incremental Station Elevation Difference Report

Nov 18, 2013

I need to conceive a Incremental Station Elevation Difference Report (Toolspace - Toolbox) where each station is worth 20 meters. But I don't know how to set C3D 2013?

View 2 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Report For Incremental Station Elevation Difference

Mar 20, 2013

I have more than 200 alignments of road network. The profile design are already done for this. I want to generate Incremental Station Elevation Difference report for all the alignments.

For this I have to select each alignment, its respective profile & generate the report for it. As am having more than 200 Alignments I will have to repeat the process 200 times. Is there any way to make the process easier like generating report for all the alignments at once?

View 4 Replies View Related

AutoCAD Civil 3D :: Alignment PI Station Report Settings?

Feb 1, 2012

I am trying to export an Alignment PI Station Report. I've set all the settings I can find to round coordinates to 4 decimal places, Distance to 2 decimal places, and Direction to the nearest second (DMS). When I execute the PI Station Report, the Distance is 3 decimal places and the Direction is to the nearest 100th of a second. how to get these to the correct decimal place? I managed to change them to the correct decimal place for a Station & Curve Report, but not for the PI Station Report. Also, for the Northing/Easting coordinates, I want to remove the commas (for example, a Northing of 3,058,715.3774' should read 3058715.3774').

View 4 Replies View Related

AutoCAD Civil 3D :: Station Offset Report By Point Group?

Feb 2, 2012

I am trying to use the Station Offset to Points report from the Reports manager. Currently, as far as I ca see, there is no way to select a group of points to include, either by point group or selection from the drawing.  There is only "Select All' or "Deselect All".  I want a report that will show the station, offset, raw or full description and elevation of a group of points related to an alignment/street.  I don't see that option. 

View 2 Replies View Related

AutoCAD Civil 3D :: Station Offset To Points Report Not Working?

Oct 31, 2011

A co-worker asked if I could create a report that listed the station and offset values for selected points & alignment.  After selecting "execute" for the Station Offset to Points report, the file gets hung up before I can select the points and alignment I want.

I've tried xml-ing out the desired points & alignment into another file and running the report from..

All other reports under Alignment and Points work fine (drawing does not have other C3D objects).

I'm using C3D 2011 version 3.

View 2 Replies View Related

AutoCAD Civil 3D :: Alignment Report That Includes Both Station And PI Information

Mar 19, 2012

I have a 2 mile alignment of a railroad loop track and I am looking to generate a report that include both information at 50' increments and the curve data, i.e. PI, PT, so I can generate a staking report for the surveyors. I noticed that there are pre-canned reports that handle one or the other but not both.

View 2 Replies View Related

AutoCAD Civil 3D :: Station Offset To Points Report Not Sorted?

Aug 10, 2012

Civil 3D 2013

Toolspace > Toolbox > Reports Manager > Points > Station Offset to Points

why point number 9 comes after 1 instead of 8?

Clicking on the column headers to sort does not work.

Found another report of this, but in an earlier version of C3D.

[URL]

View 1 Replies View Related

AutoCAD Civil 3D :: Reports Station Offset To Points Report

Feb 21, 2012

When I Create a Station offset to points report, the points are out of order and it does not display all of the points.

View 2 Replies View Related

AutoCAD Civil 3D :: Get Super Elevation Report?

Aug 21, 2013

how to get Super Elevation report for superelevation value at every point separated 

View 2 Replies View Related

AutoCAD Civil 3D :: Suppress Units In Elevation Differences Report?

Jun 6, 2013

how to turn off the units in the output table for the Incremental Station Elevation Difference Report of a profile?

It currently adds "m" to the end of my data which makes it difficult to get working in excel (the "m" makes it a text cell and doesn't allow calculation, unless you can ignore letters in excel).

View 2 Replies View Related

AutoCAD Civil 3D :: Label Station At Specific Elevation

Apr 15, 2013

Is there a way to label or list a station at a specific elevation? I know how to list and label an elevation at a given station but I need to know where a specific (given) elevation is located on an alignment or profile. I don't care if this is listed or labeled on the alignment or profile, I just need to be able to get a station at a given elevation.

View 5 Replies View Related

AutoCAD Civil 3D :: Getting Station And Elevation From Profile View

Oct 31, 2012

I am using LISP in C3D 2012.  I am trying to get the station and elevation of a point I pick in a profile view.  I found the Method that will get that info, but I can';t seem to get the syntax right.This is the Method;

HRESULT FindStationAndElevationAtXY(
    [in] double X,
    [in] double Y,
    [out] double * pStation,
    [out] double * pElevation,
    [out, optional] VARIANT * pInBounds
[code]...

View 4 Replies View Related

AutoCAD Civil 3D :: Cross Sections - Creating Report Of Offset And Elevation

Apr 28, 2013

I have some cross sections showing existing and finished grade. The finished grade is a channel and floodplain with slopes to catch existing ground. I’d like to create a report of the offset and elevation at each grade break for the finished grade. Optionally, it could be offset and cut or fill at each grade break. I’ve found the tool to create annotation for the offset and elevation info, but the cross sections are too small on the drawings to accommodate all that text. Is there a way to generate a report for the section view group or even each section view that would contain that information?

View 1 Replies View Related

AutoCAD Civil 3D :: Find Station And Elevation Values At Given X / Y Coordinate

Nov 22, 2013

C# public bool FindStationAndElevationAtXY(double x,double y,ref double station,ref double elevation)

I don't understand this method. API documentation says that "Finds the station and elevation values at the given X,Y coordinate." but this method return a bool value.I don't understand neither "ByRef".

View 2 Replies View Related

AutoCAD Civil 3D :: Grip Edit Profile Station / Elevation

Jul 26, 2013

I was editing a profile yesterday and when I chose the grips, it offered me the station or elevation which I could edit. C3d crashed and now after 3 restarts, I cannot get the SE grips. I only get polar tracking when using grip edits.

Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post

View 1 Replies View Related

AutoCAD Civil 3D :: Difference Elevation Between Two Points

Mar 21, 2013

Any way to get an expression that calculated the difference between two points and pick up the results as point elevation.

View 5 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Getting Station And Elevation From Profile View?

Mar 22, 2013

can i use  the "methods supported"   " FindXYAtStationAndElevation" to retrieve a elevation and station from a profile view?

View 4 Replies View Related

AutoCAD Civil 3D :: Create Elevation Label That Give Spot Elevation

Jul 11, 2013

I am trying to create an elevation label that will give me the spot elevation followed by the letters "TC" and then on the line below subtract 4 inches from the elevation followed by the letters "BC".  It's easy enogh to add the letters but the simple equation of elevation - 4 inches eludes me.

View 3 Replies View Related

AutoCAD Civil 3D :: Point Elevation Takes On Elevation Of Snapped Object?

Dec 19, 2012

When I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.

-changing osnapz variable

-latest civil 3d service pack

A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue

View 7 Replies View Related

AutoCAD Civil 3D :: How To Change Invert And Top Elevation To Existing Top Elevation

Apr 16, 2012

i have some existing drainage pipe and structures in a base plan that i need to change the invert (which is the easy part) and the top elevation to the existing top elevation that does not meet the minimum presect in civil 3d 2012 is there a way to change these min. to match my exisitng elevation for example i have a catch basin invert is 15.45 top is 17.56 with a 18" rcp  the cover will be less than 12" and i need to change this.

View 3 Replies View Related

AutoCAD Civil 3D :: Map Check Report

Mar 8, 2012

I'm need to make a Map Check report on C3D2011, but I don't know how to do it. Since C3D everything have to be setup before it can be use, so my questions are: How do I setup map check? Or What do I need to do get map check report?

What are the steps to do it right?

View 3 Replies View Related

AutoCAD Civil 3D :: Cut And Fill Report

Dec 1, 2013

I would ask a question about the Cut and Fill Volumes reports in Civil 3D.

View 3 Replies View Related

AutoCAD Civil 3D :: How To Make TXT Report

Feb 29, 2012

I import a survey data (X,Y,Z) in civil3D and make an horizontal alignment near them.  I want reference theses survey points to my new alignment by a .txt report (#pts  CH.  OS  elevation).  Is it possible?

View 3 Replies View Related

AutoCAD Civil 3D :: How To Report Material

Nov 22, 2013

Setting  up my first press parts list and already I'm regretting it...

How do we report material? Lower case letters spelling ductile iron is not acceptable in this office. How to I edit this to be 'DI' or anything else? I have looked in the press part catalog editor or whatever it's called and did not see a way to add to the list of all lower case materials.

Do I have to rely sole on part description for material in labels? ....and why do they still think that no one needs to use the " symbol with these parts? Freakin crashing all morning tring to get this going...

IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)

View 2 Replies View Related

AutoCAD Civil 3D :: Custom Parcel Report

Oct 24, 2012

I copied the General Legal Description report and renamed it.  When I ran the report, it asked me to save the file Civil.html before opening it.  If I run the OOTB report it does not ask me to save the page before opening it.  Is this something that I can fix?  I have not found a setting anywhere that changes this.

View 1 Replies View Related

AutoCAD Civil 3D :: Report Generator Tab Missing?

Mar 20, 2012

I'm missing the tab in my tool space that has the report generator in it. What command brings that tab back?

View 2 Replies View Related

AutoCAD Civil 3D :: How To Modify Volume Report

Sep 13, 2013

I would like to re-format the way volume reports are displayed, for example I don't need the cut area or reusable volume columns or I'd like to change the Cu.m. dimensional to something like m3.

View 5 Replies View Related

AutoCAD Civil 3D :: Alignment Report With Radials?

Sep 13, 2012

Is there a way to included the radial bearings of curves for alignment reports generated for the report manager? I know the curves are tangent because I made them so, but the guy checking my report for errors doesn't know that. I don't know any xml.

View 1 Replies View Related

AutoCAD Civil 3D :: Editing The XSL Report Functions

Oct 9, 2013

Civil 3D 2013.

First prize for me would be to be able to access Parcel boundary vertices via managed dot net.

I could not find the boundary property of the Parcel object.

It looks like developers can access Parcel vertices via COM, in the Loops property of Parcels.

So, it is possible to combine the two to get what I need.

Then I turned to the Report facility. The METESBOUND XSL iterates Parcel segments but provides the distance and bearing instead of the vertices. I was hoping to get to the bottom of the linked code to edit it and produce the vertices output. But - I failed again. Cannot see how the XSL files get to the data needed. 

Is there maybe a book or comprehensive reference on the XSL files that provide the reporting function?

View 2 Replies View Related

AutoCAD Civil 3D :: How To Create Custom Report

Nov 20, 2013

how can i create custom report ?

View 7 Replies View Related

AutoCAD Civil 3D :: Why The Cut / Fill Numbers Are All At Zero In Report

Jun 26, 2012

why the "cut/fill" numbers are all at zero in my report?  All the offsets and the design elevations show just fine....

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved