I used direct-distance entry to place the dimensions 3/8 away from the object lines... needless to say, while most horizontal dimensions are 3/8 away, the vertical and inclined dimensions are not. see attached. other than creating construction geometry and physically moving the endpoints of the arrows to the correct location, is there any way of getting this precise and correct the first time i do it?
how to edit the line space distance for the dimension text. I can change the style, size and several other features. But the line space distance is the one thing I can't seem to edit. The only solution I know of and use is exploding the dimension and then the text turns to mtext and the option becomes available. But then if the section changes to a shorter/longer area, i have to go through several steps with the exploded lines. how to edit the line space distance for the annotation in the dimensions. i have also attached a pic of my issue as well.
I am trying to oTrack distance from the top circle edge of a cylinder to a certain distance ... whenever i try to do that ... it either track to x and y .. but not in z :/ ... the video i have on you tube he did it so simply and it seems to be easy .
I am not sure what is wrong .. but i heard parallel and perspective view could make a difference .. i actually try both :/ ...
I'm using AUTOCAD 2011 x64 (E.208.0.0)I get the dimension linear tool;I specify the first extension line origin clicking somewhere;I specify the second extension line origin clicking somewhere; (ortho mode on)
Then I pull the mouse pointer to the direction I want the dimension go and I type 1, because I want the dimension lie down at a distance of 1 unit from the draw (a wall for example).
If I check the distance from the draw to the dimension line (not to the text) using de "Inquiry > Distance" tool I do not have that 1 unit I have typed, instead it retrieve a value like 0.9822, and this value varies on a random way, every time its different.
I want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
Can i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
When doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
my normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
I have to break a line/polyline with a known distance around a point of the line. I was thinking of creating a circle with a specific radius and then trim the line inside the circle, then delete the circle but I could not find how to use trim in .net.
Is there a way in AutoCAD 2012 to set a distance between a line and the text above it? How to be able to mark all my bearings and set a distance so all of them ends up with the same distance from the line they refer to.
I am having an issue with my dimensions. If I have a dimension that is 1'-3" or larger, my extension line beyond my dimension line extends the normal length, but as soon as my dimension goes under 1'-3", the extension line then gets twice as long outside of the dimension line (see attachment). I have researched...and i can't seem to find a dim variable that will let me change this. is there anything to control this happening once my dimension goes below 1'-3"?
i have been using the DI command to get line lengths (of road widths, that sort of thing), and in the command line, it just gives the X, Y and Z distances, and not the actual length of the line.
how to change the displayed information so that the length of the line drawn with DI shows in the command line?
Also is there an option to choose what is displayed in the command line with DI command?
I am look at a way to place the start of a line a certain distance away from the end of another endpoint. Is there a more productive way of doing this rather than drawing one line on the x axis and another on the y axis.
m in the middle of a little project and want to know if its possible to save the info that the _MEASUREGEOM command displays when applied to measure distance or angle to the project.
I used to use a lisp script to do this but that was on my PC. Im not running autocad on my mac and it wont alow me to run the script. it loads it but then gives the error
error: vl-load-com not supported on "Mac OS X Version 10.8 (x86_64)"
when i try and apply the command. Does MEASUREGEOM have a built in feature to save these details to the project i.e. next to the line or shape measured?
One drawing we have has a weird quirk. The rubber band line for the Distance command is black. The background of our AutoCAD is also black, which makes it very hard to see. This only seems to affect the Distance command as the rubber band for the Line command is grey (though the current layer is yellow).
I have confirmed this is limited to just one drawing, no matter what machine you open it on. The AutoCAD version we are using is Civil 3D 2011.
I have checked the following: DRAGMODE (auto), HIGHLIGHT (1), restored colors to default, made sure 3D views were not on, rendering off, UCS set to world.
Next step? Repairing the AutoCAD installation is not likely to fix the problem.
RE: Autocad LT not able to move an entity along a line a specific distance using cursor snap and dynamic input
What I want to do is move a line on an angle a certain distance in the direction of the line itself in this case 20mm
What used to happen is you'd simply select move and an endpoint on the line then hover over the mid or opposite endpoint of the line and enter 20 and it would move 20mm along the trajectory of the line.
The same set of actions now only seem to allow you to move the entity 100mm (the default value) along itself in the correct direction. If you enter 20 it does not move and if you enter 50 it moves 100!
When I use the distance command and pick the first point the rubber band line doesn't appear and then when I pick the second point I get a distance, but I have no way of knowing exactly where the points I picked landed.
I saw another post about the rubber band being black against the black background, but that is not the problem.
When I turn Otrack on I get the rubber band, but I don't like Otrack on because it causes other problems. How to get the rubber band to work the way it did before?
is it possible to have a dimension style setup that shows the dimension text inline with the dimension - without having to move it?I have been looking but cannot seem to do it - is it possible and I am just missing it?
I am trying to find a routine that will allow me to offset an arc by a distance and to a scale.
The offest command is very limited as to how far I am able to offset without the boject completely vanishing.
I am trying to make a flat pattern from a cone or something close to it. The routines and programs that I have found do not quite accomplish this very accuratll. They are always off on the upper and lower arcs and on the distance between the arcs. Tho this would not completely sovle my problem, it would allow me to get the distance between the top and bottom correct.
I have located steel beams of an existing building roof frame. I am being asked to provide a distance from the theoretical roof to these points. The roof is sloped and I can create the sloped roof plane but I am unsure how to get the distance from the point to perpendicular to the theoretical roof slope, not the difference in elevation. Also would it be possible to label or make a table?
How do I control the 'auto' option under DIMSPACE?
I have found that the entry listed as 'Jog Height Factor' under the 'Linear Jog Dimension' are of the 'Symbols and Arrows' tab of dimension style does the trick. However, does that control a variable?
I am trying to set up a scale of a known distance on a photgraph that I have put in autocad. I know that this distance is 100mm, and have tried to work out how to mark this known distance, and then be able to work out the measurements of other dimensions in the photograph, including non-linear measurements. Is this possible?