CorelDRAW Graphics Suite X6 :: Export Image - Arrow In Same Size
Oct 14, 2013I am new to corel draw. i m using corel X6. i m having one arrow image (ie) 12px width and 23px height
I need the arrow in the same size with 24x24px transparent bg.
ADVERTISEMENT
CorelDRAW Graphics Suite X5 :: Export Results In Change In Image Size?
Nov 26, 2012I am creating my files in 5x. The final product will be a printed 8.5 x 11 calendar. The company requires 300dpi resolution, and a bleed size of 1/16".
Product 8.5" x 11" Calendar
Final Size 8.5" x 11"
Bleed Size 1/16"
Resolution to Submit 8.627" x 11.127", 2588 x 3338 px, 300dpi
My page is letter size.The image is a bitmap composed of numerous photographs and vector graphics.
I have saved them to a CMYK BITMAP 300DPI.In Corel the image reads as 11.125" x 8.625"
When I export to a pdf or jpg the image size changes to 11.293" x 8.796" which will not work for the printer. It sets the design elements outside the 'safe zone'.
CorelDRAW Graphics Suite X5 :: Export EPS Page Size
Jan 9, 2012I just upgraded to x5 and can no longer export a file as an eps and hold the custom page size. In x4 I could export as an eps to a custom page size of 2.5" by 2.5". Every time I try to upload the file it is seeing it as an 8.5' by 11". I am selecting page size in advanced tab
View 8 Replies View RelatedCorelDRAW Graphics Suite X5 :: EPS Export File Size
Mar 5, 2012I have upgraded to X5 from X3 , and now when i Export EPS files, they are MASSIVE, I work in a company that does signs, and car vinyls and other graphics /vector related work, and It is important that i use EPS as file format for out " plotter" but a size of 800 mb and 2,2 GB now when it used to be 10 mb is insane.
I also use POSTSCRIPT 2, as 3, makes the file over 2 GBs.
CorelDRAW Graphics Suite X6 :: Document Size Changes When Export It To PDF?
Dec 11, 2012When I export or publish to pdf from CorelDraw X6 the document size changes.If lets say i export an A4 page and then inport it again the size of the page has changed from 210x297 to 209,903 x 296,686 !
View 4 Replies View RelatedCorelDRAW Graphics Suite X6 :: Export To GIF Does Not Keep Its Original Size
Nov 15, 2012[ Bug ] Exporting to .GIF does not keep its original sizeThe checkbox 'Maintain Size' checked.
Result: importing that .GIF is 5 time size bigger.
CorelDRAW Graphics Suite X5 :: TIFF Size Export
Aug 25, 2011we have just upgraded to x5 and now i have a big problem exporting tiff:
I work for print,not web. lets say i have a 50x50 cm layout. default dpi of document is set at 300. if i want to export that as a tif, it defaults at 300dpi in the export dialogue. until now, in x4, if i checked the maintain aspect ratio and just changed the dpi to lets say, 150dpi, it would only change the % of the size, not the actual size of the tif! now it changes somehow to double the size! but i want the same size to remain! also cm is selected, so no reason for it to keep the number of pixels!. i have to uncheck the maintain aspect and recheck it again to put the correct value in the size.
Also, i work with big documents, is there a way to stop previewing the jpegs in the export as jpg dialogue?
CorelDRAW Graphics Suite 12 :: Cannot Export A Big File Size
Nov 27, 2013I prepared my drawing for size A0 (841 mm / 1189 mm) but when exporting it in Jpg or Tiff format for printing, it happens something very strange. In the dialogue window it doesn't allow a bigger size than A1 (594 mm / 841 mm). It shows me 74 % for width and height parameters. I try to change it to 100 % but it turns back to 74. Now I cannot print it because I need the bigger size.
View 9 Replies View RelatedCorelDRAW Graphics Suite X5 :: Export To PDF File Size Will Be Too Large
May 6, 2011i make a design in coreldraw x5 and export to pdf but i don't know the seeting how i compress pdf file size...so then its size is too large.
View 1 Replies View RelatedCorelDRAW Graphics Suite 11 :: Export Image To PNG?
Mar 22, 2008I am trying to export an image to PNG, tried watching the videos here but it doesnt seem to work, im still getting the white background. I have corel graphics suite 11
View 5 Replies View RelatedCorelDRAW Graphics Suite X4 :: How To Tell File Size Of Image
Mar 7, 2011How to tell the file size of an image when in corel?
I have some big files that slow the computer down when working on them. Can I some how tell how big a picture is within corel draw.. ie It would be nice to be able to right click on a picture that I have imported into the workspace and it show me how many mega bytes it is.
Then I can go through my files and delete the larger pcs and make them smaller.
As it is now, I have to pretty much delete them all and start again to find dthe few pics that are like 3-5mb in size.
CorelDRAW Graphics Suite X6 :: How To Export Single Layer As Image Such As PNG
Aug 16, 2013My drawing has different layers and I need these layers to be different PNG images. How can I do it?
currently, I use the very silly way to do that: unhide only one layer and select this layer to export one layer by one layer. Whether Corel draw has export image from different layer, or there is additional tool can do that?
CorelDRAW Graphics Suite X6 :: How To Export Very Large Image Files
Jul 20, 2012Is there any way for CorelDraw X6 to export very large TIFF files? e.g. greater than 30,000 pixels in each dimension? I am currently running X5 on XP 32-bit and it cannot seem to handle it, even though Photo-Paint appears to have the ability.I finally manage to get our IT guys to give me a Win7 64-bit test machine for me to trial X6 64-bit, but seems to only do marginally better than my X5 installation. The test machine already has 7GB RAM installed plus a very, very large drive.I also had to run the same test on Adobe Illustrator and it was able to deal with this very quickly and smoothly, no troubles at all.You may find it hard to believe, but I actually like using CorelDraw :-), which is so far the standard package for our company, but if I cannot get X6 doing what we want, I'm afraid it's the end of the line.
View 14 Replies View RelatedCorelDRAW Graphics Suite X5 :: Export Image As JPEG Using CMYK?
Oct 30, 2011i'm trying to export an image as a jpeg but as soon as i change from RGB to CMYK the previewed image just becomes a solid black.
View 5 Replies View RelatedCorelDRAW Graphics Suite X5 :: Reduce Image Size Of A Vector
Jul 2, 2011I have a vector that is 1000 pixels wide and 500 pixels high. How do I reduce it down to 1000pixels wide and 120 pixels high? Can I do that without distorting the image?
View 2 Replies View RelatedCorelDRAW Graphics Suite X6 :: Exporting To Bitmap Image Size?
Jan 30, 2013I exported a graphic as a 600 dpi bitmap. However the saved image is 600.125 dpi. Why the non-whole number size? And how can I export to a whole number? I get either 600.xxx or 599.xxx.
View 3 Replies View RelatedCorelDRAW Graphics Suite X6 :: Poor Image Quality In HTML Export
Aug 27, 2013When I export the image quality is poor. I tried all settings but it does not get better. E.g. I used JPEG, progressive, highest quality. What is the reason for that?
View 15 Replies View RelatedCorelDRAW Graphics Suite X5 :: Automatic Page Fit To Any Image Size OR Vice Versa?
Jan 30, 2013My current photo editing software (Microsoft PhotoDRaw) has the ability to do this and wondering if I can achieve the same in CorelDraw X5 or PhotoPaint Pro X3. I just reinstalled both and need to start using them since PhotoDraw only work up till Windows XP and I use Virtual Machine to run it.
Here you go. If say I open a new project to any page size of my choice and import any image (any size) into the page. Is there a way I can automatically fit the page to the image size in either CorelDraw X5or PhotoPaint X3? That is, if my default page size is letter (8.5"x11") and I import an image that is 2.2"x5", can I automatically fit the default page to the fit the image at 2.2"x5"? Really very handy too. Can I also do the reverse image to paper size? If I can do either, where do I go?
CorelDRAW Graphics Suite X5 :: Line Vs Curve With Arrow On End?
Feb 12, 2011I know this has been in Draw for a long while, but I wish they'd make the arrow tip start at the end of a curve.
steps to reproduce:
F7, draw a curve
draw a line
change both to have an arrow on one end
change both to 16px thickness so you can see the arrow position well
This problem comes up when I'm doing a detailed diagram and I've got my arrows going around all over the place. I need to tweek one so I convert to curve... but in doing so, the end of the arrow sticks out farther than it used to... and that forces me to change the postions and angles of possibly a few nodes.
I'd like the arrow to end at the node so there's no change in it's position when you do a convert to curves.
This is one of those... "that's not a bug, it's been around forever" type of things I know, but it should be changed IMHO.
I should mention that this is also a pain when you go in with the node edit tool when the line isn't selected and you can't see the nodes... you click around at the end, and eventually find it hiding in the center of the arrow/triangle part.
CorelDRAW Graphics Suite X5 :: Adjust Perspective Effect Using Arrow Keys?
May 9, 2013Is there some way to move the corner control points of the perspective effect grid via the arrow keys? I have hand problems and any time I need to move something very precisely I use the arrow keys, or risk hurting my hands. If not, would there be some way to do this with a macro? Also, is there some setting for it – other than having to hold down the shift and control keys while you click and drag, which is just a killer for me – that will arrange it in ways that are only symmetrical (where if you move one side the other side moves equally in the opposite direction)? As far as I can see, rectangular and freehand settings behave the same.
View 3 Replies View RelatedCorelDRAW Graphics Suite X5 :: How To Create Shadow Effect As Pointed With Red Arrow
Feb 24, 2012I would like to know how to create the shadow effect as pointed with the red arrow, if this design is to be printed to 2 spot color (Orange 021 C and Black)
View 11 Replies View RelatedCorelDRAW Graphics Suite X6 :: Captured Cursors Default To Arrow Pointer?
Jul 16, 2012When capturing screenshots with Corel Capture X6, the captured cursor always defaults to the Windows arrow pointer in the screenshot. For example, say you were taking a screenshot while using the Pen tool in CorelDRAW. The cursor is a fountain pen tip. In the screen shot it shows as the default Windows arrow pointer. Another example, you take a screenshot in Photo-Paint while using the Paint tool and the cursor looks like the brush you are using, but the screen shot shows it as the arrow pointer.
View 4 Replies View RelatedCorelDRAW Graphics Suite X6 :: How To Set Distance Object Moves With Arrow Keys
Oct 23, 2013I have been using Corel Draw primarily in my work for more than 20 years but have never taken the time to understand this....nor why on some artwork an object will move fractionally but on other artwork (specifically this time, a 20m x 10m workspace for vehicle signage) the objects move 200 or 300mm!?
I always thought this was a 'drawing precision' setting but even when I set that to 1 decimal place it doesn't seem to affect this.
CorelDRAW Graphics Suite X5 :: Moving Objects By Pixel Increments Using Arrow Keys
Sep 27, 2011How can set that an object only moves per 1 pixel increments when moving using the arrows keys?I am designing a few web banners right now and when i move objects with the arrow keys to have them placed exactly, they jump with more then 60 pixels in one go making this exercise a bit useless.
View 3 Replies View RelatedCorelDRAW Graphics Suite X5 :: Add Up / Down Arrow Beside Text Boxes (spinner) To Adjust Height And Width?
Apr 24, 2011Is it possible to add up/down arrow beside the text boxes (spinner) to adjust the height and width of an object by clicking with a mouse?
I hate pressing F8 at startup!
CorelDRAW Graphics Suite X6 :: Export To Webpage Directly Since HTML Export Doesn't Work?
May 17, 2013Will Corel6 (or later) ever be able to export to a web page directly since the HTLM export doesn't work (drops links). The Corel Web program, or what ever its name is, was a joke. Its amazing that Corel work puts its name on a program that you could not open a CorelDraw file.
My current work around is to export to a JPG and then import that into dreamweaver and add the links there, then post. A pain but it works.
CorelDRAW Graphics Suite X5 :: Maintain Size Is Checked But It Does Not Give Proper Size
Mar 22, 2011Export is weird, maintain size is checked but it dose not give the proper size. My page size is 922x1344, but the image exported is half that size.
View 14 Replies View RelatedCorelDRAW Graphics Suite X3 :: Export Text Or Graphics As EPS Files - Vinyl Cutting?
Mar 18, 2012why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
CorelDRAW Graphics Suite X5 :: Can't Export Large Drawing With Raster Graphics
Jul 21, 2013i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
CorelDRAW Graphics Suite X5 :: Import From Illustrator Maintaining Graphics Position And Canvas Size
Nov 9, 2011I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
CorelDRAW Graphics Suite X5 :: Exporting Web Graphics To Correct Size
Dec 1, 2011How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.