I wanted to edit these Japanese characters.
They were combined, so I had to separate them first. I picked them and used the Break Curve Apart feature. And here's what I got.
All inner contours were GONE! Here's the file.
Why this message? Why do I have to "draw inside the lines"? I don't even have the boundries of a paper on my surface, so I don't know where the border is. How can I fix this?
What I tried to do here was rotating a small object 90°.
Is there a way to adjust the kerning between 2 characters of text? I don't want to adjust the kerning of the entire word, just between 2 letters in the word. The font has too much space between the "V" and "A". I've tried using Paragraph Formatting, but that adjusts the entire word.
View 15 Replies View RelatedFor instance...I want to view all the fonts in wingdings without having to type every key on my keyboard.
View 4 Replies View Relatedtext_problem.cdr
When opening the attached file and printing it to efi/fiery rip (or adobe pdf), some characters are on top of each other. Word spacing is also to large. Printing the same file with X5 without problem. File is originally created in X5. Tried with the new "update text" feature as well, same issue.
I'm using the trial version of X5 and have noticed that the number of characters that display the file name at the top has been shortened since X3. In some cases I'm not able to even see any of my file name because I have things saved in many subfolders for organizational purposes. It appears that it is limited to about 120 characters, which sounds like a lot, but when using dropbox and other subfolders, can fill up quickly. When I open the same exact file in X3, the name is fully displayed. How to change this? Or is this possibly just a trial version thing? .
View 1 Replies View RelatedI am using CorelDRAW 12 with Windows XP. I would like to type Chinese Characters. 1 specific word can't be shown correctly in CorelDRAW 12. It's "焗" and its read as "Ju" in Chinese. I was going to Text > Encode and check whether the word can be shown or not. In fact, in Encode Dialogue I can see the character well, but when I click "OK" and I can't see it. I get only the rectangle or nothing instead.
View 2 Replies View RelatedAfter fairly smooth sailing for using X6 I ran into a problem that's caused me to switch back to X5 for the time being :(
I work in files that have thousands of individual characters in them. In X5 if I wanted to change the color of about 10,000 individual characters it would take about 3 seconds to do so. If I do the same thing in X6 I takes at least 30 minutes (or longer, I just killed it by that time).
Working with large amount of texts is incredibly slow X6, not just 5 or 10% or slower, doing somethings takes up to 10x times as long.....
I know there is a lot of features for text in X6 but this decrease in speed puts a complete block in my workflow. Maybe Corel could have a feature that individual text characters have minimal properties associated with them or something?
Here are my specs:
windows 7 64bit with office 2010 installed
Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
NVIDIA Quadro 4000
16.0 GB ram
Font Flux Architect characters in normal and bold formats are displayed as blank squares, though italic and bold-italic format display them correctly. Print preview shows all formats correctly.
CorelDRAW X5 on Windows XP
Recently when completing a project, instead of being able to just click and write text or click on and edit existing text, a 'edit text' pop up box appears. i have looked at the setting and i cant seem to work out what i have done and how to correct this?
View 3 Replies View Relatedhave to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedIs there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
in earlier versions of draw you could move one end of line with the pick tool by moving the cursor over the end node grabbing it and moving it where ever you wanted. With x5 it seems that you must go to the node editing tool to select the node. Is there a setting I'm missing that will allow the pick tool to select node?
View 5 Replies View RelatedThis just started - after editing artistic text it drops down a space or two and has to be repositioned.
Is there a way to stop this?
I have a problem with editing img raster in Corel Draw X3.
I cant open Photo-Paint... If i use the button to editing a raster, opens Windows Paint.This problem started today. Yesterday everything worked normally.
I am new to Coral Draw x5, and we have just purchased a Roland VersaCamm vs-420, I have an eps file, once i am ready to create a cutline i click shaping > Boundary thats all good, then i can get my cut contour line which is around the image, how can i increase the cut line so i have a 1/2mm white gap around the file im cutting?
View 1 Replies View RelatedYesterday, suddently when editing text in a document, clicking outside of the text edit, CDR crashes:
Runtime error!
Program: c:Program Fi...
This application has requested the Runtime to terminate it in an
unusual way.
Please contact the application's support team for more information.
I have tried to do the tricks, I googled, like resetting to factory, editing the xml file and running as administrator. Nothing works. It is when I edit any font, and in a new document also. AND update of CDR X4 with service pack 2 did not work.
I have an existing font I I want to chop and change about eight characters of the font. The changes I need to make are very small slight change to the stand of the A.
I'm very new to corel draw - I have tried reading the tut's on creating your own font but I think it is a little overkill for me needs.
Can I convert an existing font to curves do the slight changes then export it as a TTF ?
All editing I make on a page changes all the pages.
I must have changed a setting unknowingly.
I am supposed to be translating a website from english to japanese; having received an Excel document with all of the translated copy, Photoshop refuses to utilise any fonts other than something called 'ms mincho' or 'ms meiyro' (sic).
I want to employ any of the fonts designed for the japanese alphabet which i have researched and purchased online. Photoshop refuses to display these. I have also activated the 'asian fonts' under 'preferences'.
Any decent fonts which will display the japanese alphabet on copy/paste of characters from another application, or is this an adobe photoshop failing.
I have some Japanese fonts installed on my cpu and I was trying to use them in PhotoShop (PS) but they don't show up as the Japanese (and other) characters. In photoshop CS2 in the font selection drop down menu you know it gives you a preview of that font using the word "Sample" for that particular font. For example if you were to look at Arial to the right of it the word "Sample" will be demostrated in the Arial font. (yeah that was confusing to type) Well in that dropdown menu it displays in the Japanese characters. However, when I select that font to begin typing it uses normal alphanumeric characters. When i previewed the font in the windows font viewer it is also displays as normal alphanumeric characters.
Example fonts: MS Gothic, MingLIU,SimSun.
I believe all of these are True Type Fonts
So I will jump right to the issue. I like to make my edits occasionally in wireframe, and as I began to manipulate or move nodes around, the minute I finish editing the first node or a group of nodes, all of the nodes vanish. The only thing that is present in wireframe after they disappear is the object (or line that I am editing) no nodes.
Now, I have learned that if I zoom in or out, they appear again, I would have to continuously do this in order to make edits in wireframe. I do not have this problem in Enhanced View.
Windows 8 / ATI Radeon HD 5700 Series / AMD Phenom II X4 965
My graphic card is up to date; however, I dont believe this is a graphic issue due to the fact that I can edit in Enhanced view without issues.
I found the page number option in the prepress menu. that is coreldraw adds page number in the bottom centre to all the pages. Is it possible to edit the font and location of page number?
Till now i have been using page numbering macro that's built inside coreldraw by default. but its not dynamic. i have to do page number all by start if i delete a page in my document.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
If I open a 4-page PDF in CorelDraw, I can edit anything in it. But if I save my changes, it saves as a 4-page cdr file. But I want to save the changes to the PDF. Is the only way to save the changes to the pdf file to re-publish the whole 4 pages to PDF again and have it replace the old one when asked? Wouldn't this further compress any jpgs?
Re-publishing the whole thing and changing the settings to no compression (and remembering to reset them back again later!) seems very inefficient......The question, of course applies to single page pdf's as well, but I'm thinking of deleting or adding a page or changing page order.
When I create my merge document, regardless of how many pages, I will need to make edits to some of the text. Corel will randomly crash when I try to edit the text. Every time. I have lots of work to do and have not the time to deal with this.
Using Corel Draw X4 v14.0.0.701
I've been trying to edit a certain Corel Draw document. At first it told me I was missing a font. So I closed the Corel Draw and installed the missing font.
But now its not showing the new font in the document. I see the new font in the control panel. And i can type a new text box. But I have 60 pages or so and I dont want to retype all these text boxes.
As soon as i paste Japanese text and click on a different layer, photoshop freezes and crashes. Any thoughts?
Steps to reproduce:
1. Open cs6 photoshop 64 bit
2. Create a new appliaction
3. Add a layer
4. Paste in some japanese text (Sample text - ご旅行中も、安心してワンちゃんをお預けください)
5. Hit enter
6. Click on a different layer (background layer)
7. Crashes with the following error -
[code]...
In X5, I was able to edit the position of the line for underline text : Thickness and position, up or down in %
The last command for Characters Effect | Underline was « Modified... »
Cannot find it in X6 ! It's not available in the same menu !
Is it possible that I can open a bitmap present in a coreldraw file in photoshop, edit it there and it gets back to its original position. that is the thing for which corel photo paint gets opened, i can set Adobe Photoshop for editing images?
View 14 Replies View RelatedI really got used to the short cut of editing text pressing ctrl+left SHIFT + t , this brings me right into the
text box where I am able to quickly access all the text features, now since last update every time I make a text change in that window my text drops one line down and even though I will hit the cursor to front and back space it bringing it right to top when I hit OK it still drops my text one line down, this has become very annoying...
I love this feature but I am unable to bring it back to its original functional way. I did reinstalled corel , and yes I did reset the application still the same thing is happening.
I need to find a way to cut the shape of one object out of another object. In the above photo I need to be able to print the black crosses without the printer printing the white ink under them (you can see where the black ink is not adhering to the white ink very well).
View 11 Replies View Related
