CorelDRAW Graphics Suite 12 :: Some Specific Chinese Characters Can't Be Shown
Jul 6, 2011
I am using CorelDRAW 12 with Windows XP. I would like to type Chinese Characters. 1 specific word can't be shown correctly in CorelDRAW 12. It's "焗" and its read as "Ju" in Chinese. I was going to Text > Encode and check whether the word can be shown or not. In fact, in Encode Dialogue I can see the character well, but when I click "OK" and I can't see it. I get only the rectangle or nothing instead.
View 2 Replies
ADVERTISEMENT
Jun 4, 2012
i have a long lag whenever I switch from typing english text to chinese characters, and vice versa.
For example, I have two text object: One with english text, another one with a chinese text. Let's say I am currently selecting an english text, can move, can edit.
But when I select chinese text, there's a long lag, like 10-20 seconds of lag before I can move chinese text. By editing the chinese text, there's another long set of lag.
Then, it is smooth to move the chinese text. But, when I select the english text again, there's another set of lag. It's like the program trying to search for something on the background.
This has nothing to do with font types, as they switch pretty easily, but there is a lag when switching between an english font type and a chinese font type.
View 2 Replies
View Related
Dec 6, 2013
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
View 9 Replies
View Related
Oct 20, 2011
So I have a bunch of files that were made in MS Excel using Chinese characters in SimSun font. After downloading some language packs the Excel file shows up correctly on my PC. I want to copy and paste the file into Corel. It works fine except some characters show up as a question mark. Most characters (80%) show up fine however.
I have Windows XP, Office 2003, Corel X5, and no understanding of the Chinese language.
View 4 Replies
View Related
May 12, 2011
Is there a way to adjust the kerning between 2 characters of text? I don't want to adjust the kerning of the entire word, just between 2 letters in the word. The font has too much space between the "V" and "A". I've tried using Paragraph Formatting, but that adjusts the entire word.
View 15 Replies
View Related
Oct 5, 2011
For instance...I want to view all the fonts in wingdings without having to type every key on my keyboard.
View 4 Replies
View Related
Mar 26, 2012
text_problem.cdr
When opening the attached file and printing it to efi/fiery rip (or adobe pdf), some characters are on top of each other. Word spacing is also to large. Printing the same file with X5 without problem. File is originally created in X5. Tried with the new "update text" feature as well, same issue.
View 15 Replies
View Related
Jul 3, 2012
I have Corel X5. I am designing graphics for sublimation printing. some of the graphics as seen in the program are not printing the same is what I see on screen. For instance I did a power clip process and it looks great on screen but the print preview does not reflect the graphic as seen in the program. The power clip is no longer clipped to the design. In another instance I used a fountain fill on design, the design looks great on screen and in the print preview but when printed doesn't look at all like what I designed on screen.
Most of my graphics are printing fine, its just when I have applied some special techniques that I am having problems. Is due to layers possibly?....
View 13 Replies
View Related
Dec 12, 2011
I'm using the trial version of X5 and have noticed that the number of characters that display the file name at the top has been shortened since X3. In some cases I'm not able to even see any of my file name because I have things saved in many subfolders for organizational purposes. It appears that it is limited to about 120 characters, which sounds like a lot, but when using dropbox and other subfolders, can fill up quickly. When I open the same exact file in X3, the name is fully displayed. How to change this? Or is this possibly just a trial version thing? .
View 1 Replies
View Related
Nov 2, 2013
I wanted to edit these Japanese characters.
They were combined, so I had to separate them first. I picked them and used the Break Curve Apart feature. And here's what I got.
All inner contours were GONE! Here's the file.
View 3 Replies
View Related
Apr 9, 2013
I was going down the list of a few thousand web photos that we use on the company site, resetting levels via the Tone Curve in Paint X3 to make them more legible and uniform, when I noticed something odd.
The filesize that Paint indicates will result from a particular jpg compression level does not match what the Windows XP file folder indicates. Usually the discrepancy is only a couple K, but it can be much more and there seems to be no rhyme or reason to it.
I will load a jpg that is shown in windows as 12K, adjust the tone curve to match other product photos, then go to save, adjusting the compression while watching the Paint claim for resulting file size. Let's say that Paint is claiming 6.7K at compression of 14. When I actually do the save, it shows up as several K different, usually bigger - say 10K. How is it that Paint is so consistently off in this?
View 3 Replies
View Related
Apr 13, 2012
After fairly smooth sailing for using X6 I ran into a problem that's caused me to switch back to X5 for the time being :(
I work in files that have thousands of individual characters in them. In X5 if I wanted to change the color of about 10,000 individual characters it would take about 3 seconds to do so. If I do the same thing in X6 I takes at least 30 minutes (or longer, I just killed it by that time).
Working with large amount of texts is incredibly slow X6, not just 5 or 10% or slower, doing somethings takes up to 10x times as long.....
I know there is a lot of features for text in X6 but this decrease in speed puts a complete block in my workflow. Maybe Corel could have a feature that individual text characters have minimal properties associated with them or something?
Here are my specs:
windows 7 64bit with office 2010 installed
Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
NVIDIA Quadro 4000
16.0 GB ram
View 6 Replies
View Related
Dec 3, 2012
If you take blend tool to gate one color to other or same or gray scale it give correct result. But if you use New color style and new gradient it show wrong effect in CMYK.
View 6 Replies
View Related
Jul 17, 2011
Font Flux Architect characters in normal and bold formats are displayed as blank squares, though italic and bold-italic format display them correctly. Print preview shows all formats correctly.
CorelDRAW X5 on Windows XP
View 13 Replies
View Related
Jun 20, 2013
macro that would select all text of specific color (white) and delete it from the page
View 1 Replies
View Related
Mar 20, 2013
I have been using Corel for over 20 years, and have never needed support. I do most of my work editing nodes within a drawing for creating continuous line patterns that are repeatable.
For years I have simple "nudged" the first and last point of a complex curve to the appropriate position. Now I want to simplify that by entering in the coordinates for the node.
I have tried Object Coordinates, but it appears to do nothing after I change the node location, or radically change my design. There is no documentation for it. I have searched Customize for some sort of input field to add to the toolbar with no luck.
I always have to add the information on the coordinates of the selected note to the Status Bar, so I am surprised that I can't find an option for editing the position.
View 5 Replies
View Related
Dec 14, 2012
i need to type a text in corel of a specific size in millimeters. i know there is a setting in the corel options that allows sizing text directly in millimeters, instead of points. problem is that i need to type in romanian language, which has these points and marks above or bellow certain characters like A, T or S and the size in millimeters that i enter in the text size box will give that size to the "marked" characters, whereas i need only the pure, normal letter to be given that size. for example, an S with a comma under it.. i want just the S to be given a certain size and the comma scaled proportionally. furthermore, i would like to add an even spacing between all the letters that i type, also expressed in millimeters. i could only find a percent expressed setting in the text properties panel, i dont even know percents of what.
how can i do this in the fastest way possible, or automatically?
View 10 Replies
View Related
Apr 9, 2012
Is there any way I can choose some Master layers to be present on selective pages only? For example in a 50 page document I have a master layer having a square and a rectangle. Now this should be available on pages say 1-10, 11-23. The rest of the pages should not have them.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 4 Replies
View Related
Aug 24, 2011
In 2006 I started a vector-based comic using CorelDraw, made for posting on the web in RGB. Over the years I've made the transition to a more CMYK-friendly palette that works on the web, though a handful of heritage characters still have the old RGB profiles. I'm looking to do a book collection now and, as such, want to convert these characters' specific colors to their fitting CMYK counterparts.
Is there a batch process that allows me to convert a specific handful (maybe 2 dozen) colors RGB --> CMYK across a number of files? I'm looking at hundreds of pages of artwork here, so even Corel's Object Find/Replace would be a tedious slough.
View 9 Replies
View Related
Jul 11, 2011
I have a radius that is spread between 10 and 40 degrees that I need to evenly space 6 line segments throughout.
What this is for is a property with 5 lots along a curved street. Each lot is the same size and I am trying to draw just the sections that are affected. I have tried using the star feature and reducing it to single lines, but they do not space evenly and getting the line number is very difficult. I have tried dividing the angle range and come up with the correct angle and spacing but this is also an issue. Is there any way to do this without dragging each line separately?
View 8 Replies
View Related
Dec 29, 2011
I have the page numbering macro. It works on new files; however, it doesn't work on specific saved files. What could be wrong with those files? Is there any way to enable the page numbering macro in those files?
I use Corel Draw X3, by the way.
View 4 Replies
View Related
Mar 19, 2013
I am trying to add Chinese characters along with my English notes. I had someone translate into Chinese characters, but when I try to paste the characters into my text, they all change to ? marks.
View 1 Replies
View Related
Apr 17, 2012
For the last few weeks my copy of C3d 2012 has had what appear to be chinese characters pm all tooltips.This started after a network change here which resulted in everyone gaining a new user account on their PC.
I copied over all my old settings.I have tried adding font packs from the installation disk.I tried repairing from the installation disk.
Makes no difference; it's still Chinese (or what appears to be Chinese anyway). how to get this program back into English or is a reinstallation the only answer?
After reading a thread that seems related I also tried changing the windows advanced appearance options for tooltip fonts.Didn't have any effect.
View 1 Replies
View Related
Oct 30, 2013
I need to open a 4 page PDF that was originally created in word in Simplified Chinese. But when I open the PDF in Illustrator with Simplified Chinese open, some of the characters change. My client in the past has had success outlining the chinese before she sends. But it is no longer working for some reason. How can I match what I see on the PDF without having to convert it to a rastered image.?
View 5 Replies
View Related
Jan 19, 2012
I have some legacy custom .DCL files that we want to convert the user interfaces (text boxes, labels, etc) to Chinese characters. Is that even possible in .DCL?
I have gotten our NET and VBA apps converted but not having much luck with the DCL files.
View 2 Replies
View Related
Mar 26, 2013
we use AutoCAD 2013 english version also in China.
Have a look to t below process
(setq app (vlax-get-acad-object))
(setq actdoc (vla-get-activedocument app))
(setq actlay (vla-get-activelayout actdoc))
(setq laynam (vlax-get-property actlay 'name))
On a Chinese computer with Windows XP, the layout name via ActiveX is displayed correctly "A3 -布局-02" on the variable laynam.
But under Windows 7 64 Bit I get this "A3 -??-02". So all ActiveX objects with AutoLisp commands do not transfer the Chinese Unicode characters, also on a system in china.
But the pure lisp command (layoutlist) for example returns always the correct characters ("A3 -布局-02")
Do I need any Chinese dll’s for ActiveX dependent language? On my test PC I installed the file autocad_2013_traditional_chinese_language_pack_win_64bit in the hope I get shared files for ActiveX but this did not bring success.
View 1 Replies
View Related
Apr 13, 2012
Ever since I got back to my desk after theEaster break I have had an odd problem witj C3d 2012.
The pop up names of the buttons along the bottom (snap, grid, osnap etc) are apparently now in Chinese. Tool tips for other tools are also containing a mixture f what appears to be Chines plus corrupted characters.
View 2 Replies
View Related
Nov 28, 2011
I have been having the following happen in a number of my drawings for the last two weeks. Whenever I wblock anything, I get the follwing characters added to the message:
Command: w WBLOCK 1 found
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢㤴㐺
桰皺Couldn't find the message 4 in msg database 49
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢㤴㌺
Couldn't find the message 3 in msg database 49
It doesn't seem to affect anything in the wblocked drawing or in the original drawing.
Civil 3d 2011 or 2012
Quad Core Intel
Windows 7 x64
8GB RAM
View 6 Replies
View Related
Jul 24, 2011
I'm currently trying to use the text tool so I can color a line of text in two differing colors. However when I highlight the characters I want to change the whole line changes.
How do I change the color of specific characters in a line of text?
View 3 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Dec 1, 2010
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies
View Related
