Ever since I got back to my desk after theEaster break I have had an odd problem witj C3d 2012.
The pop up names of the buttons along the bottom (snap, grid, osnap etc) are apparently now in Chinese. Tool tips for other tools are also containing a mixture f what appears to be Chines plus corrupted characters.
For the last few weeks my copy of C3d 2012 has had what appear to be chinese characters pm all tooltips.This started after a network change here which resulted in everyone gaining a new user account on their PC.
I copied over all my old settings.I have tried adding font packs from the installation disk.I tried repairing from the installation disk.
Makes no difference; it's still Chinese (or what appears to be Chinese anyway). how to get this program back into English or is a reinstallation the only answer?
After reading a thread that seems related I also tried changing the windows advanced appearance options for tooltip fonts.Didn't have any effect.
I have been having the following happen in a number of my drawings for the last two weeks. Whenever I wblock anything, I get the follwing characters added to the message:
Command: w WBLOCK 1 found
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢㤴㐺
桰皺Couldn't find the message 4 in msg database 49
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢㤴㌺
Couldn't find the message 3 in msg database 49
It doesn't seem to affect anything in the wblocked drawing or in the original drawing.
Civil 3d 2011 or 2012
Quad Core Intel
Windows 7 x64
8GB RAM
I am trying to add Chinese characters along with my English notes. I had someone translate into Chinese characters, but when I try to paste the characters into my text, they all change to ? marks.
View 1 Replies View RelatedI have some legacy custom .DCL files that we want to convert the user interfaces (text boxes, labels, etc) to Chinese characters. Is that even possible in .DCL?
I have gotten our NET and VBA apps converted but not having much luck with the DCL files.
we use AutoCAD 2013 english version also in China.
Have a look to t below process
(setq app (vlax-get-acad-object))
(setq actdoc (vla-get-activedocument app))
(setq actlay (vla-get-activelayout actdoc))
(setq laynam (vlax-get-property actlay 'name))
On a Chinese computer with Windows XP, the layout name via ActiveX is displayed correctly "A3 -布局-02" on the variable laynam.
But under Windows 7 64 Bit I get this "A3 -??-02". So all ActiveX objects with AutoLisp commands do not transfer the Chinese Unicode characters, also on a system in china.
But the pure lisp command (layoutlist) for example returns always the correct characters ("A3 -布局-02")
Do I need any Chinese dll’s for ActiveX dependent language? On my test PC I installed the file autocad_2013_traditional_chinese_language_pack_win_64bit in the hope I get shared files for ActiveX but this did not bring success.
i have a long lag whenever I switch from typing english text to chinese characters, and vice versa.
For example, I have two text object: One with english text, another one with a chinese text. Let's say I am currently selecting an english text, can move, can edit.
But when I select chinese text, there's a long lag, like 10-20 seconds of lag before I can move chinese text. By editing the chinese text, there's another long set of lag.
Then, it is smooth to move the chinese text. But, when I select the english text again, there's another set of lag. It's like the program trying to search for something on the background.
This has nothing to do with font types, as they switch pretty easily, but there is a lag when switching between an english font type and a chinese font type.
I need to open a 4 page PDF that was originally created in word in Simplified Chinese. But when I open the PDF in Illustrator with Simplified Chinese open, some of the characters change. My client in the past has had success outlining the chinese before she sends. But it is no longer working for some reason. How can I match what I see on the PDF without having to convert it to a rastered image.?
View 5 Replies View RelatedI am using CorelDRAW 12 with Windows XP. I would like to type Chinese Characters. 1 specific word can't be shown correctly in CorelDRAW 12. It's "焗" and its read as "Ju" in Chinese. I was going to Text > Encode and check whether the word can be shown or not. In fact, in Encode Dialogue I can see the character well, but when I click "OK" and I can't see it. I get only the rectangle or nothing instead.
View 2 Replies View RelatedSo I have a bunch of files that were made in MS Excel using Chinese characters in SimSun font. After downloading some language packs the Excel file shows up correctly on my PC. I want to copy and paste the file into Corel. It works fine except some characters show up as a question mark. Most characters (80%) show up fine however.
I have Windows XP, Office 2003, Corel X5, and no understanding of the Chinese language.
I needed to check some vehicle turning movements against my design, so I started Civil 3d from the AutoTurn icon. As I was working I noticed that I don't have any Tooltips anymore. I've checked the global tooltip settings in the Civil3d settings, and the Autocad options, and also the tooltip settings for individual objects.
I also found that the glyphs which should appear when snaps are turned on aren't visible, although the snaps do work properly. Once I had finished with the vehicle checks I shut down, and then restarted from the Civil3d icon but the behavior hasn't changed back to normal. I've also tried repairing the installation - next step will be a full reinstall.
4 little helper functions to turn off & on the ToolTips associated with alignments. Handy for when you have a number of nearby alignments and you don't need the constant showing of all the data.
Intended for buttons, actual function names may be shortened for keyboard use.
|;
(defun c:all-align-ttips-off ()
(if (ssget "x" '((0 . "AECC_ALIGNMENT")))
(progn
(vlax-for ent (vla-get-activeselectionset
(vla-get-activedocument
(vlax-get-acad-object)))
(vlax-put-property ent 'showtooltip :vlax-false)
[code]....
what can I do to avoid the annoying mouse cursor "delay" or "jumps" when I move it inside my project ?
I have one surface and 3 aligments....
I have tried turn off tooltips on general options but... yes I dont see tooltips but the mouse seems to investigate the objects below the cursor....
In adittion,. is there a variable to control this ?
Civil 3D (2013)
i have been working on a DWG (c3d 2012) most of the day, and sure enough, after my last edit in Model space, c3d crashed.
i can remain in model space, but once I try on open the only layout tab, c3d hangs and crashes. i was able to create a new layout in the command line and rebuild my layout, but i still cannot open the original tab without a crash. i ran AUDIT and found 2 errors, but if i allow c3d to fix or delete them, c3d crashes. also, if i run PURGE, c3d crashes.
how i can determine what is at fault or a method to maybe even isolate the problem? maybe a trick?
When exporting points to a .TXT using PNEZD the elevation goes haywire.
After being exported it reads roughly 69000 in an area where the elevation should be about 5400 to 5800 feet
(very roughtly a factor of 12)
Is there a variable I can change to fix this?
Trimble Access, Civil 3d 2012 export road problem
when I export a road file to my TS2 it becomes corrupted (file size 50% of what it should be.
4 months ago there was no problem. The weird thing a is that the other worstation in the office has this issue to.
Here's what I have done to troubleshoot: swapped out both data collectorsexported this rxl file to a virtual instrument on my desktoptalked to cansel and autodesk but the said they haven't seen this problem. I can rule out the following.
trimble/autodesk software, hardware ( to much a coincidence that both work stations have this problem)Data Collectors swapped out - file size of the corrupted rxl were the same on the virtual deskto instrumentcorrupted dwg - exported a road six months ago, now re-exported and the new file is corrupted.
Both machines are identical:
Pentium Zeon
16 gb RAM
Identical software installation
I was undertaking a cut and fill analysis but the values were very different. Evaluating spot levels the depth was given as 1.2m but the volume surface stated it was only .6m.
After a while I noticed that the master surface had been "corrupted" duing a recovery, all definitions to the controlling corridor and other objects had been removed and a snapshot added with the description "added during recovery".
I had to remove the surface and start from scratch re-building the definitions.
Civil3D 2013 / 2014
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (8 CPUs), ~4.0GHz With 32768MB RAM, AMD FirePro V4900, Dedicated Memory: 984 MB, Shared Memory: 814 MB
Tune up utilities got into my system and was finally removed by windows installer today. I tried 2 times to repair Autocad2011 civil 3d, then 3 times to reinstall it, finally removed all files I could find and tried 2 times to install. Cannot install I get eror 1402 about the key being too full or somtehing like that. It is the student version but I use it for my own use and need to access the files.
View 3 Replies View RelatedJust upgraded from Civil 3D 2010 32-bit to Civil 3D 2011 64-bit. Over the years several user-defined color books were constructed using the Autocad Color Book Editor. With previous upgrades, these ACB files were simply transferred to the new version and worked OK. However, having upgraded to 2011, when the color books are opened, instead of the original colors, the color pages are corrupted, showing what look like Pantone red, green, and blue colors.
View 6 Replies View RelatedI have noticed since using c3d 2013 circle "markers" appearing at the curves on my alignments. I can't find the control to change / turn off?
View 1 Replies View RelatedI'm trying to print the hypsometry but when I do it, the surface doesn't appear. The problem is the same with other types of elevations.
I checked the layers properties, but it doesn't seem to be the problem as all the layers are printables.
I can print the hypsometry in the model space.
I am working on creating a set of plans and have a couple of note pages that are generic and will not need to be change. I am creating a template with layers, layout tabs, styles, etc. I am trying to put these notes straight into a layout tab just simply by pasting them in there. The issue I am having is with the hatching on a couple of objects, the hatches appear correctly right off. When I save the drawing and reopen the hatches are a solid block, regen does not fix this. I can however explode the hatch and then undo the explode command and it appears correctly. Is there a way I can make the hatches appear correct everytime?
View 3 Replies View Relatedthe vertical grid is not showing up even though is turned on in view style! tried different things but nothing seems to work, and the horizontal grid doesn't clip to the profile even though i select the option! it goes way up until profile frame!
Windows 7, intel I7, 8 MB RAM, civil3d 2013.
I have created a TIN surface from polyline contour data in Civil3D 2013. My file shows shows that the surface is present both in the Prospector and when I float over the surface and will preview. I assigned a style to the surface, which for my uses is displaying minors at 1' and majors at 10'. My problem is that the contours only display sometimes. That is to say, SOMETIMES I open the file and I can see the surface contours and other times it simply will not display them.
There has been NO change to the layer (on, visible and not frozen) nor to the style (not assigned as not showing or any different color) between current and the time I used the file last. Occasionally, when I restart my machine, the contours will display for a few hours worth of work, but when I return the next day, or after a hang, restart my machine again, the contours simply will not show. If I add "show triangles" in the style definition, the triangles will show every time, but not the contours.
I changed my RAM from 2- 4GB DIMMs to 2- 8GB DIMMS giving me a total of 16GB of RAM, which I did, but it doesn't seem to have made any difference in performance and the contours still don't show.
I have installed Trimble Link for Civil3D 2010 and the menu will not appear in Civil3D anywhere.I re-installed it 2 times, which sucessfully completes, but to no avail.I checked cui and it's not there to add either.
View 4 Replies View Relatedim using civil 3d 2012 when I click the DEFINE OBJECT DATA icon the dialog box is not appear I don't know if I did wrong on my software.
View 2 Replies View RelatedI have have small gray shaded boxes showing up on drawings plotted in Civil 3D, they are never anywhere I can see in the drawing and they never show up in the print preview. I have tried using multiple printers and still get the same thing. I think it may have something to do with viewports as they only show up inside a viewport window when plotting from paperspace and don't show up when I plot from modelspace.
View 9 Replies View RelatedToday I opened a file that has previously worked perfectly well, only to find that when I open my surface in Object Viewer and begin to rotate it manually, the triangles making up the surface do not appear. I have the contour lines and border (what is enabled in the Edit Surface Style/Display/Model tab) although the triangles (which should be displayed as well) do not appear. Other surfaces show like they should.
Is there another option other than the Edit Surface Style/Display/Model tab and the VISUALSTYLES command?
using Civil 3D 2013.
I'm creating finished roadway profiles by setting the PVIs then going back and inserting vertical curves (Free Vertical Parabola, PVI Based). When I insert the vertical curve, it displays as 1-5 tangents depending on length (not a smooth parabola). I've changed the curve tessellation distance under the Edit Profile Style - Design tab, but it doesn't smooth it out. What am I missing here. I don't have this problem in other drawings and I'm using the same template/drawing settings.
View 2 Replies View RelatedWe want to deliver a language independend CUIX-File and translate the UI at runtime after loading the CUIX like this:
foreach (RibbonTab tab in ComponentManager.Ribbon.Tabs)
{
foreach (RibbonPanel panel in tab.Panels)
{
foreach (RibbonItem item in panel.Source.Items)
{
TransRibbonItem(item);
}
}
}
TransRibbonItem(item)should translate the Item text displayed in the UI as well as the tooltip text.
I found a good way to translate RibbonItem texts. But the only solution I found to translate tooltips is the approach that Kean Walmsley posted in his blog here and here.
This solution has some drawbacks: It uses Autodesk.Internal.Windows.ToolTip, which Kean rates as "risky". It can not be used in my TransRibbonItem(item) function because it uses an ToolTipOpened event-handler that modifies a tooltip just when it is created.I found that this mechanism does not work very well in AutoCAD 2014: When a tooltip is created the first time, the handler is called before it is completely initialized. The posted solution reloads the tooltip in this case - which leads to a delay and display flash.
Changing the default of “design speed” appearing in the create alignment,I’m wondering how the design speed appearing in the “create alignment” dialogue box can be changed such that the second time the “create alignment” dialogue box is launched then the new value for the speed is displayed.
View 2 Replies View Related