I have a problem with editing img raster in Corel Draw X3.
I cant open Photo-Paint... If i use the button to editing a raster, opens Windows Paint.This problem started today. Yesterday everything worked normally.
I get a raster image to convert to vector format. Here's a part of this image:
I tried tracing but the image resolution is low and I didn't get acceptable results.
I've also tried tracing the edge with line segments and Bezier curves. But when the lines close a polygon the resulting polygon is not what I expect.
What tools to use to convert it to vectors? I use CorelDraw X3 and PS 5.
How come I can't choose 48-bit color palette and color picker when editing a 48-bit RGB image?
View 11 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I use and really like Corel Draw X3 (almost 3 years) and will keep that version on one P4 computer that runs win xp pro 32 bit.
X3 has been a great version that never crashes but it is getting slow as I increase the number of objects and symbols in my files. I have a new comp with win 7 pro 64 bit running CDraw X6 and the latest epilog 64 bit driver for my mini 24. I have been using the new X6 for 3 days .
In X3 a hairline or .001 is a vector cut. A line width of .005 and above are raster lines and they work well in my Epilog mini 24. I am using a 1.5" diam lens. In X6 a .005 line will not raster but only vectors. If I change it to .006 it becomes a raster line and will engrave OK.
The big Question:
Is there a way to make .005 raster as it did in X3? I have hundreds of files that are all .005 line width. I don't mind changing them but would rather not.
Could this change be because of the latest Epilog 64 bit driver that I am using with win 7 pro? Almost all my files have oddles of very fine detail (.005) and they would look a bit muddy changing the line width to .006.
I have a problem with CorelDraw X6.
When printing 100% black on laser printer the Black is all in raster. Very strange because the same file printed from X4 /same PC and same printer/ is OK and is not in raster.
Probably the problem is somewere in X6.
I don't belive that the problem is in the color management because it's the same as my X5 and there all is OK too.
Recently when completing a project, instead of being able to just click and write text or click on and edit existing text, a 'edit text' pop up box appears. i have looked at the setting and i cant seem to work out what i have done and how to correct this?
View 3 Replies View Relatedin earlier versions of draw you could move one end of line with the pick tool by moving the cursor over the end node grabbing it and moving it where ever you wanted. With x5 it seems that you must go to the node editing tool to select the node. Is there a setting I'm missing that will allow the pick tool to select node?
View 5 Replies View RelatedThis just started - after editing artistic text it drops down a space or two and has to be repositioned.
Is there a way to stop this?
I am new to Coral Draw x5, and we have just purchased a Roland VersaCamm vs-420, I have an eps file, once i am ready to create a cutline i click shaping > Boundary thats all good, then i can get my cut contour line which is around the image, how can i increase the cut line so i have a 1/2mm white gap around the file im cutting?
View 1 Replies View RelatedYesterday, suddently when editing text in a document, clicking outside of the text edit, CDR crashes:
Runtime error!
Program: c:Program Fi...
This application has requested the Runtime to terminate it in an
unusual way.
Please contact the application's support team for more information.
I have tried to do the tricks, I googled, like resetting to factory, editing the xml file and running as administrator. Nothing works. It is when I edit any font, and in a new document also. AND update of CDR X4 with service pack 2 did not work.
I have an existing font I I want to chop and change about eight characters of the font. The changes I need to make are very small slight change to the stand of the A.
I'm very new to corel draw - I have tried reading the tut's on creating your own font but I think it is a little overkill for me needs.
Can I convert an existing font to curves do the slight changes then export it as a TTF ?
All editing I make on a page changes all the pages.
I must have changed a setting unknowingly.
So I will jump right to the issue. I like to make my edits occasionally in wireframe, and as I began to manipulate or move nodes around, the minute I finish editing the first node or a group of nodes, all of the nodes vanish. The only thing that is present in wireframe after they disappear is the object (or line that I am editing) no nodes.
Now, I have learned that if I zoom in or out, they appear again, I would have to continuously do this in order to make edits in wireframe. I do not have this problem in Enhanced View.
Windows 8 / ATI Radeon HD 5700 Series / AMD Phenom II X4 965
My graphic card is up to date; however, I dont believe this is a graphic issue due to the fact that I can edit in Enhanced view without issues.
I wanted to edit these Japanese characters.
They were combined, so I had to separate them first. I picked them and used the Break Curve Apart feature. And here's what I got.
All inner contours were GONE! Here's the file.
I found the page number option in the prepress menu. that is coreldraw adds page number in the bottom centre to all the pages. Is it possible to edit the font and location of page number?
Till now i have been using page numbering macro that's built inside coreldraw by default. but its not dynamic. i have to do page number all by start if i delete a page in my document.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
If I open a 4-page PDF in CorelDraw, I can edit anything in it. But if I save my changes, it saves as a 4-page cdr file. But I want to save the changes to the PDF. Is the only way to save the changes to the pdf file to re-publish the whole 4 pages to PDF again and have it replace the old one when asked? Wouldn't this further compress any jpgs?
Re-publishing the whole thing and changing the settings to no compression (and remembering to reset them back again later!) seems very inefficient......The question, of course applies to single page pdf's as well, but I'm thinking of deleting or adding a page or changing page order.
Why this message? Why do I have to "draw inside the lines"? I don't even have the boundries of a paper on my surface, so I don't know where the border is. How can I fix this?
What I tried to do here was rotating a small object 90°.
When I create my merge document, regardless of how many pages, I will need to make edits to some of the text. Corel will randomly crash when I try to edit the text. Every time. I have lots of work to do and have not the time to deal with this.
Using Corel Draw X4 v14.0.0.701
I've been trying to edit a certain Corel Draw document. At first it told me I was missing a font. So I closed the Corel Draw and installed the missing font.
But now its not showing the new font in the document. I see the new font in the control panel. And i can type a new text box. But I have 60 pages or so and I dont want to retype all these text boxes.
In X5, I was able to edit the position of the line for underline text : Thickness and position, up or down in %
The last command for Characters Effect | Underline was « Modified... »
Cannot find it in X6 ! It's not available in the same menu !
Is it possible that I can open a bitmap present in a coreldraw file in photoshop, edit it there and it gets back to its original position. that is the thing for which corel photo paint gets opened, i can set Adobe Photoshop for editing images?
View 14 Replies View RelatedI really got used to the short cut of editing text pressing ctrl+left SHIFT + t , this brings me right into the
text box where I am able to quickly access all the text features, now since last update every time I make a text change in that window my text drops one line down and even though I will hit the cursor to front and back space it bringing it right to top when I hit OK it still drops my text one line down, this has become very annoying...
I love this feature but I am unable to bring it back to its original functional way. I did reinstalled corel , and yes I did reset the application still the same thing is happening.
Whenever I edit text in the pop-up dialog, there is usually an extra line inserted at the top of the text (a blank first line). I can't get rid of this extra line through the pop-up edit window, I can only delete it using the text tool directly on the page. This only started with the latest update.
View 2 Replies View RelatedIf it´s possible to import vector graphic with fountain fills from AI (adobe illustrator) to CorelDraw x6 for further editing.
if i export from AI to eps or ai, and import to x6 the graphic with fountain fills becomes raster, if i export to pdf, the graphic is almost okay, but not as i wish to.
In coreldraw x6 selecting text for editing show light blue background. How can I change it to gray as it is in coreldraw x5.
View 7 Replies View RelatedI'm the IT manager at a rather large company which uses graphics quite often. Currently, our art staff uses CorelDraw x3 & x4. Most of what they work with is CDR & EPS files but occasionally PLT as well..
I have looked all over Google for a program that will display a CDR file, but cannot find a good one. A found a couple that will display the thumbnail, but not much else. I wouldn't mind that, but it's not legible on most images.
What we are looking for is an app to install on our reps machines so that they can view these files with a customer.
crest 1.cdr
I have been playing with the nodes at the peak of this image but I can't get a uniform line.
porta1.cdr
Is there a easier way to clean up this image, I have been going through and deleting nodes and moving some. I am still learning but there has to be a better way.
I want to use an image I have imported to Coreldraw x5 as a reference picture to trace around.
I am not sure how to dim the opacity of the reference image so that It is easier to to trace around.
I've been using Photopaint 12 for years. This seems like it should be very simple to do, but I've never found a really quick way.
All I want to do is put a single colour 1 or 2 pixel border around a load of images. I don't mind if it is inside or outside the existing image size (the choice would be nice).
I know I can simply draw an unfilled rectangle, but it's easy to drag the shape outside the edges of the image, or to end up a few pixels in, and it's quite time consuming doing it manually.