Problem with text styles: I have a big body of text, with several styles applied. The problem is, editing one of the styles does not affect the text that has this style applied to it. Changing the style or creating a new style does not work - it's like these particular parts of text are immune to editing the style. It works only when I select the text and manually apply the style. Further editing the style does not affect this text, I have to manually select it and apply the style again.
I'm perfectly happy with the TrueType font (BankGothic Md BT), but all the style settings change to the T1 equivalent every time I close, and when I open the file again the T1 text does not show up. I can go through and reset all the styles, then re-apply them, but it wastes a lot of time.
I was wondering why Batang and Arial were appearing in the Fonts under Document Properties when I had not actively used them in my "New" document.
When I looked at the Default text files, I believe I see the reason. I find Batang listed as the default Asian Text font for both Artistic and Paragragh Text. The options for Asian Text don't seem to include any fonts that I have on the old machines.
Similarly, the Middle East Default Text style would seem to generate the Arial(Arabic) entry in the required fonts.
Is there a way to completely eliminate the default Asian Text and Middle East entries from the default text styles?
Is there maybe a macro for styles (either text or graphics) that
1. connects objects assigned with a style, to that style LIVE? eg, altering the style properties, automatically all objects assigned with that style will adopt those changes too,
2. offers LOT more configuration options than the current default CorelDraw styles options
In CDraw X5 I can choose line styles. But I would like to add some more styles (and to remove some that I never use).I only found a possibility to create new styles based on a kind of a pixel approach: A one-by-many array of single squares can be marked to be coloured of white, producing dashed lines with any kind of dash length.Also, the dash "frequency" seems to be dictated by the line width only; I do not manage to make thin dashed lines with a reasonably visible dash frequency.
However, I would like to make line consisting of other shapes, like circles, triangles, diamonds, etc., either filled or "open". Or make thin dashed lines with user-specifiec dash and space lengths that do not change when changing the line width. Is this possible?
Also, multi-colour dashes – with e.g. odd-numbered dashes in one colour and even-numbered ones in another color – might be useful.
In the current version, however, the number of dash schemes available is big enough to be confusing. Especially when the line is made relatively wide – say, 0,5 .. 1 mm or so – and I want to make more lines with the same shape, than it is difficult to find again the same shape the list of standard shapes. Is it possible to add names (or numbers, but not just running numbers!) to the shapes, so that a shape can be found again easily?
I am wondering if there is a way to import e.g. a table from a website without loosing the styles (CSS stylesheets). I want the table to be printable - so the resolution of a screenshot is too low.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
Is there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
To create 2-color artwork from any colored vector clipart I used to be able to:
import colored clipart convert to CMYK if needed select entire graphic and create new styles with 2 parents change (edit) the colored parent to a named Pantone spot color (the child colors automatically become percentages of the Pantone spot color) "find and change" the remaining CMYK to Grayscale, and then back to CMYK (this ignors the spot color and converts the annoying rich blacks to percentages of K) export to a PDF file--which when imported into, say, InDesign, will separate on the K and Spot Color Plates only, in all its glorious shades of gray and tints of Pantone spot color.
I'm completely at a loss on how to do this in X6, and I'm on a short deadline.
I had several CorelDraw documents that crashes on me, and the auto-backup did not work.
In all these documents, if I open the text paragraph window and typed on it, the entire program will crash if I exit that window after finishing.
I discovered that if I typed directly on the text paragraph, it will not crash. That means do not open the text paragraph window to do editing. But this makes editing very slow since it seems to be more memory intensive.
Strange the auto-backup directory/folder always do not have my backup files too.
A client sent me their logo where the name is straight across. They would now like to wrap it around the circle in their logo... They do not know the name of the font, what the font couldn't id it, not much response on their forum...
Is there a way to fit text to path, where the text has already been converted to curves?
Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
Is it possible to lock a text box to prevent it from moving but still be able to input & edit text?I want to make a drawing template in CorelDraw x6 using text boxes for "non Corel friendly" people to use but need the actual text boxes to stay in the same place all the time!?
how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
I am using Corel for driving a fiber laser through a dedicated Net connection not available to the rest of the network and it and my computer are right next to the switch.
My problem is that when I send a job from the PC to the laser it works fine. If I make a small change on the graphics, I save it and send a new job to the laser. Quite often, some part of my grapics is left off the plot even though I didn't touch that graphic or mod it. So I send the job over again and now somewhere else is missing some of the graphic word...usually a word or a letter or number. I usually turn off the computer or get out of Corel and come back in and it is fixed. That doesn't sound like a network dropped or corrupted graphic. I have tried turning off the laser with Corel still up and it doesn't fix the problem when I bring the laser on line again.
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
I'm making tickets and i need to add tickets numbers, from 1 to 1000. Print & Merge doesn't fit for me.So I want to change text tag for example: "<text>" to text which will be different (1, 2 ,3 ,4 ,5 ,6 ,7 ...) Wagenaar where the code finds word "Andorra" and change it to "Andorre".
Public Function FindReplace(ByVal str As String, ByVal toFind As String, ByVal toReplace As String) As String Dim i As Integer For i = 1 To Len(str) If Mid(str, i, Len(toFind)) = toFind Then ' does the string match? FindReplace = FindReplace & toReplace ' add the new replacement to the final result i = i + (Len(toFind) - 1) ' move to the character after the toFind Else FindReplace = FindReplace & Mid(str, i, 1) ' add a character End If Next iEnd Function. [code]...
I am having trouble resizing text boxes with text in them, so that the text scales with the box.If I convert the text box the curves, it messes up the formatting when I add an outline to the curve because the text box itself is given a outline.
Is there a way to automatically condense text in a one line text box, I have linked text boxes vertically and want to paste a list of names into them, and if a name is too long I want it to condense to the text box.
I know how to do this in print merge with the envelope tool but not in a text box.
I work for a translation company and I've installed a Trial Copy of Corel Draw X5.
I have a 6-page document with several text areas (the Obect Manager sees them as Artistic Areas [I think]).
I'm trying to extract all the text into a text (prefferably an XML), file translate the text using Trados, then import the translated text file back into the Corel Draw Document, with the appropriate text in place of the original text.
I've tried using Extract / Merge text, but this doesn't seem to work.
