I was working on a document and suddenly was unable to move selected objects! This was true on all 3 pages. I had not changed any settings. I could select objects but not move them.....In the Object Manager, all layers are visible and editable. Even Edit through layers is checked. And the working layer was red.
View 4 Repliesissue with selecting and then moving an object in Photo Paint? I can hover and get the object name, and then select but when I go to move the object PPT selects and moves an entirely different object. I have held down Ctrl, Alt etc. to no avail. Bigger objects are easier since there is more to grab on to but smaller objects are a pain.
View 1 Replies View Relatedunable to combine, trim, weld objects
View 4 Replies View Relatedwhen i write 8,45 it writes 8. i can't use decimals suddenly
View 9 Replies View RelatedCorelDRAW X5 suddenly does not launch. I click to launch it, but when the splash screen comes up, it stays stuck on "Loading User Settings". Doesn't go further than that.
View 7 Replies View RelatedSuddenly, CorelDraw X4 is not reading all my fonts properly. I can select them from the list in a document, but all I get is a box and no text in it. I am running XP on this machine.
View 13 Replies View Relatedthe speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
View 2 Replies View RelatedI am using CorelDraw Suite X5 on a Windows 7, 64-bit operating system. I always used x,y coordinates for positioning objects. Last week that option suddenly stopped working. Now when an object is highlighted the x,y coordinates always registers 0,0. If I try to re-position an object by putting in new coordinates, objects are placed way off the page. My inputs are not held and the coordinates are back to 0,0.
View 4 Replies View RelatedMy X4 cdr file starts to load and suddenly X4 shuts down instantaneously. Same with the backup. Can it be repaired?
View 14 Replies View RelatedI often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies View RelatedI try to move a guideline with the field Y for example.1-) Put a guideline in the page2-) I need to put my guideline exactly to: Y: 5.181''.So, I put in the Y field 5.181''. The bug result is that the field makes an addition.If the position of the guideline is Y: 4.0'', and I want to move it to Y: 5.181'':the guideline go directly to Y: 9.181''.Another question:What is the use of the Object Origin button's options for the guidelines?
View 3 Replies View RelatedHow can I change sequence of colors by my own?
Even "edit palette" doesn't work. How to do that? In X4 is OK but in X5 I cannot do that.
Recently, when I draw a line, it not show the line until done it.
Means, I cant see where is my actual line.
Moreover, when i highlight the object (many objects), it doest show where is my line indicator...
I have created the following:
However, I cannot fill the objects. I am guessing that they are not actually objects, and just lines on a page.
I am fairly new to CorelDRAW and I am having an issue with layering objects that I can't figure out. The problem I am having is this:
I have two line drawings, and one sits on top of the other. Normally, the object in the back is partially hidden by the one in the front. However, I have just done a drawing where the object in the back is NOT partially hidden by the one in the front, and it looks like they are both on the same layer. What happened? I am not sure if I inadvertantly changed a setting, but I can't seem to figure out how to hide that back layer. I have tried using the 'order' function, and that usually works, but for some reason it is not working this time.
aligning objects...How to distribute some objects that they are 2mm apart.
View 7 Replies View RelatedIs it possible to convert/open a CDR file to a CPT or PSD file such that the objects are editable. Specifically I need the text to be editable in the resulting CPT or PSD file. I'm using X3.
View 7 Replies View RelatedAs when drawing cartoons... example:
- Draw two circles & fill them with the same color.
- Overlap them
- You see the overlapping line of the top circle.
- How do you hide just that part of the line so it appears as one object of the same color
- while retaining the overall object outline.
A colleague of mine has problems when moving a textbox.She grab the textbox with the mouse, the complete work area change to a white background, so she doesn't see, where she has to drop the mouse cursor. After she drop the mouse cursor, the background change to the graphic again.
The hardware she uses is new and included the following components:HP Z200 i7-870 Workstation2,93 GHz, 6 GB 1333MHz DDR3, ATI FirePro V3800 with 512MB RAM, Windows7 Prof 64bit
I am wondering, if is possible to move content of print preview window. View picture for better understanding. In version X4 it was possible.
View 1 Replies View RelatedI have followed the instructions carefully and am unable to fill anything.
I make a rectangle. Choose the colour from the palette, drag the little coloured box over to the rectangle and release. Nothing. Many years ago I used my brothers Corel draw, so I know ( or knew then ) how to colour a rectangle.
I'm not able to assign a Hotkey to enable me to use Corel Capture. No matter what I use, it tells me that the Hotkey is already being used by this system. I have deleted Hotkeys and then then tried to reassign them to no avail.
View 14 Replies View RelatedWhen I export from Corel Draw as a jpg, then put the image online, on IE it shows as a red x.
View 5 Replies View RelatedUsing CorelDraw X6.1
Having issues with exporting files to an .eps format - using "selected only" some of the objects that I have selected do not get exported - ie. they are missing from the .eps file altogether.
On top of that, most of my colours get washed out to a grey scale - I do work in spot colours.
I have tried f8, and tried reinstalling.
So picture that you have designed something in Corel. Let's say an invitation. I go to put text or a graphic on top, and nothing is going on top. My text is behind. Nothing i do works. (ex. ctrl-pgup, object in front of.... etc.)
Is there some feature that I possibly touched?
Im working with an image (pictured below) and I want to make all of the white bits clear, so as to allow whatever colour is behind to show through.
View 7 Replies View RelatedSince X6 I can't rotate any Barcode anymore. When I open X5 Files in X6 the barcodes are unreadable...
We need a patch Corel.
I have a series of images that have been designed - very basic shapes (a straight vertical line with a ball on top in which ascending numbers are placed in each one. So effectively each image is made up of 3 seperate parts and look like numbered lollipops. Each of these images are currently evenly spaced apart and formatted so the text is all properly aligned and sized etc - I would like to be able to copy certain groups of these images and paste them into a new working document which is fine, but I then need to somehow re-space them out to scale once they've been pasted in. So for example i have copied them in and they are 20mm apart to each other (as per my original drawing that i copied from) - is there a way of then altering this spacing so that for example so that they are all 33mm apart but still retail the original formatting properties so they are not stretched etc?
View 11 Replies View RelatedWhen I export a page as Illustrator CS4, I choose the option "Convert outlines to objects" but it doesn't seem to do what I expect. It does fix the issue of missing arrowheads on lines, but it doesn't convert the outlines to fills as I expected -- is that correct? I wish there was an option to convert lines to fills on export.
View 8 Replies View RelatedI am a screen printer making a leap into the world of CorelDraw. Loving it so far, especially the trace options. That being said, I have a piece of artwork that a client wanted me to scan in and trace to see how it would turn out. The image can be found here:
[URL]....
Problem I am having is the stick figure in front of the cross. The figure is being grouped with the cross...not allowing me to properly color the image and separate how I need it. The text needs to be red, the cross black, the hearts red, and the stick people white...will be going on a blue t-shirt. Am I looking at having to create my own lines...or am I overlooking/not thinking of an easy way to do this?