CorelDRAW Graphics Suite X5 :: X And Y Coordinate Positions Suddenly Stop Working
Jul 17, 2013
I am using CorelDraw Suite X5 on a Windows 7, 64-bit operating system. I always used x,y coordinates for positioning objects. Last week that option suddenly stopped working. Now when an object is highlighted the x,y coordinates always registers 0,0. If I try to re-position an object by putting in new coordinates, objects are placed way off the page. My inputs are not held and the coordinates are back to 0,0.
How has a pattern like this been achieved. They are not uniform and the same image is twisted around into different positions but evenly spaced to form a pattern.
CorelDRAW X5 suddenly does not launch. I click to launch it, but when the splash screen comes up, it stays stuck on "Loading User Settings". Doesn't go further than that.
Suddenly, CorelDraw X4 is not reading all my fonts properly. I can select them from the list in a document, but all I get is a box and no text in it. I am running XP on this machine.
I was working on a document and suddenly was unable to move selected objects! This was true on all 3 pages. I had not changed any settings. I could select objects but not move them.....In the Object Manager, all layers are visible and editable. Even Edit through layers is checked. And the working layer was red.
the speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
Sometimes when I try to copy and paste a logo, that has text around the outside of it, the text will move from its original location. How do I get this to stop? I have attached a file that is currently doing this.
Every time I double click on a bitmap in Corel Draw, it opens up Photo Paint. How can I disable this option? I never use it and its a waste of my time because it takes too long to load up! I don't know if my mouse has a problem, but sometimes I can just click once on a bitmap and it triggers the photo paint to open.
I remember back in 8 or 9 when you could use the scroll mouse to "scroll". But in 11 or 12 it changed to "zoom".there is a way to change it back to scroll?
How can I stop new text boxes being rotated? When I make a new text box (or start typing artistic text) using the text tool, the box (or artistic text) is rotated 90° clockwise. The tabs also show on the left hand ruler instead of the top one. I have looked at all the options in the Tools menu but there does not seem to a way of changing this. I have attached a CorelDraw file as an example.
I am using CorelDraw 14.0.0.701 from Graphics Suite 4. My PC is running Windows XP Pro, Service Pack build 2600.
macros are all disabled and i remembered there is a command to disable all the events but i could not figure out where exactly it is located and even i tried to reinstall the using modiy and repair twice times to install the software but still persists to activate the macros.
all the macros are grayed out and even Alt F11 also not working.
I have set the automatic backups to end up in a specific folder on an external hard drive, which is always on. However, none of the auto backups end up there. They end up in the same folder as the actual file on my regular HD - which absolutely defies the purpose of having a backup on a different medium. I wish I could attach a screenshot of the setting page to prove my point, but Corel has not advanced to that level yet as it seems. Not even in "Support", which, unless you own the latest version of a Corel software, is non-existing anyway.
Every time I go into Corel Photo-Paint x5 and try to use Cutout lab, there's no pop up window with the lab, the program stops working until I hit escape. I have a lot of cutouts to do.
A graphic exported in Draw & PP in X4 as a .png works fine.
The same graphic copied & pasted into Draw or PP in X6 does not.Repeatable 100%...The eyedriopper selection of the transp[arent color seems to pick up the right color, but the output presents like a .jpg. Viewed in IE9, Firefox & Chrome with same results.
When I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!
The scanner shortcut doesn't work unless you go to acquire first. It keeps working until you close CorelDraw. When you reopen Corel, you must then go to acquire first.
The brush tool is no longer working - when I select on any of the brush tools, spray, Art burhs, spray , line, marker etc, they will not work. When I select the drop down nothing is listed. Additionally, none of the other tools in the box, Effect Tool, Image Sprayer too ect, do not work as well. Did I select something to turn off the tool?
I've tried to uninstall and re-install and that did not work.
When I try to draw an ellipse (or circle) and drag it on to my sheet, nothing happens. All of my other shape tools work as they should. What has happened. It worked originally.
I have uninstalled and reinstalled my x5 and while it fixed the error causing my default text cursor to start at 270 degrees for some reason instead of 0, I still cannot edit ANY font text as far as the kerning goes. When i drag it, it snaps right back everytime. This is extremely frustrating when aligning text to a curved path and all the letters are squished together.wth? This just happened in the last week randomly.
For years I have used the clone tool happily which has been great for touching up photo's on Photo-paint 12
A few days ago - imported a jpg into Paint as usual, went to use the clone tool and it just doesn't work any more. I can select the icon and the little circles come up but it just doesn't 'clone' anything. Its as if there is mysterious setting that has been turned on that just makes nothing happen.
I have reinstalled the software: no luck - still the same.
I am working with some very large images in X5, ~ 2500 mm x 1200 mm at up to 600 DPI sometimes. (And before you say it, yes, I do need this. It is a very specific application that we work on daily and I do need the ability to basically control every single pixel at that size & that resolution). I'm using WinXP 32-bit (company mandate).
When I need precisely sized objects, I am using CorelDRAW and occasionally when I need pixel perfect placement, PhotoPaint gets the call. The images may go through both before it runs through a final backend processor (some specialized software) and then going to print.
The problem is that I am running into limits when I go beyond 300 DPI (depending on the image dimensions). For example, CorelDRAW often will fail to export a TIFF correctly when I try a 450 DPI image at that size (some TIF file comes up but nothing can load it, it's corrupted). Or for even smaller images, if I enable transparent background, I also get a similar problem. Sometimes, e.g. Photo Paint, just chokes up with out of memory problem and fails to load images at all.
Thing is, we actually have Photoshop CS5 available and while there are many things I don't like about it, it actually can handle stuff of this size. So there is also a push to get Illustrator as well under the same assumption that it will work. However, Adobe stuff is way more expensive, feels more bloated and slower and (for me at least) a pain to use compared to Corel, so I'd rather not.
Would moving to 64-bit WinXP work? Or would I need to go to CorelDRAW X6? This is already a quad-core machine with 4GB of RAM.
I upgraded my Corel Draw to X6 version about 3 months ago. It worked perfect until a few days ago, since in started to freeze when doing simple operations as copying a vector image or a text or exporting a document (for example a vector image to .png or .pdf)
The funny part is that we have two computers in our office with Corel installed, and both of them have the same problem. We checked with our IT department, did all the upgrades to Corel and Windows, did a repair to Corel, and still, same problem.
We purcased X6 and installed on 3 PC. two are Windows XP and one has Windows 8 operating system.
X6 work fine and fast on Windows 8 system.
But both X6 on both Windows XP are nightmare. Just creating new document can take up to 10 sec. Printing is also very slow, but exporting simple JPG file knock-me down. It take half minute or more...
Previous we worked many year's with X4 on same PC's, now we format PC's, Install Windows XP with all service pack's and updates, reboot machine and install X6.
It is not possible to install Windows 8 on those two PC's, because they drive two machines, that only support Windows XP...
I've just installed CorelDraw X6 onto a W7 PC. Pasting bitmaps from clipboard is not working. Nor is bitmap editing when a bitmap has been imported into a document. I've loaded X6 onto two other computers with the same result (or lack of).
There were some patches available at one time but I'm not able to find them anymore. I have recently installed X3 on a W7 machine and have so far found everything to work fine except for an issue of half of my fonts being blank when trying to choose one from the drop down menu. Existing files with these blank fonts also come up with the fonts completely missing as if the entire set of words was deleted. Here is the list of patches that I've heard is necessary for X3 to be compatible with W7...
Below is a message from an older post:
I too have CorelDraw X3 on a Windows 7 machine, in order to get the best from it you will need to visit Corel's website [URL] and install the following patches Service Packs and patches in this order, re-start after each:1. CGSX3 Hot Patch1.exe2. CGSX3SP1.msp3. CGSX3SP2.msp4. Font Nav Fix.msp .. which will fix the problem with the Fontsand then run the program in Compatibility Mode with Windows XP+SP2
I recently have installed Corel Draw x5 and everything was working perfectly fine when all of a sudden it stopped opening .cgm files. It will pop up the message of Corel Draw has stopped working and then I click OK and it closes the program. Every other file extension I have tried opens prefectly fine.
Here are a couple of things that I've done so far:
1. Reverted back to a Default Workspace.
2. Closed out all Dockers.
3. Reinstalled entire program and all features. Updated all patches and Clean booted the PC with only MS Services running. (As instructed by Corel Support)
