I'm using Preimer Pro CC and I have a clip which is 1min long - I want the first 30sec to play at normal speed and the last 30sec at 200%. I can work out how to speed the whole clip up but not a portion of it.
View 2 RepliesIn Adobe Premiere, I am getting an echo when I change an audio clip's speed/duration. The change is from 100% to 103%. I've tried other values in the speed duration but all create an echo.
View 1 Replies View RelatedNot sure if this is possible, but is there any way to turn a 15 fps clip into a 30 fps clip?
View 3 Replies View RelatedCan I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies View Relatedadjusting the music clip volume on a menu.....I see that you can adjust the duration and fadein/out but not a volume adjustment.
View 2 Replies View RelatedI know how to change the playback speed of a video clip in my project, but is there a way to have it smoothly transition? For instance, can I have it go from 1x to 3x over a period of 2 seconds or must I jump directly from 1x to 3x (or manually break the files into dozens of super small chunks and manually increase each one... which will still not look smooth)?
View 2 Replies View RelatedI want to film my CEO standing on London Bridge as people walk over it. The trick is is that I want to film him at normal speed (for obvious reasons), and i want the people walking past us to be shown at double the speed.
Having thought logically I guess I need to film people walking over the bridge separately from filming my CEO, then somehow superimpose him on the that footage.
I am trying to edit a video for a friend. He shot the video with his phone and it shows up sideways when it is imported to Premiere. Everything works fine till I rotate is 90 degrees. When I rotate it the bar on top becomes red. The audio and video still play perfectly fine though. When I render the video and it plays back, the audio stays the same, but the video speeds up by almost 10 seconds. Also, when I try to just start over with the clip and just reimport it, it will only let me add audio to the sequence. The video plays in the preview, but will not add to the sequence after telling it to render the first time. I have deleted the project, all prefrences for Premiere, and even did an uninstall and reinstalled it.
View 2 Replies View RelatedI was having trouble with my video being too slow (Nikon d5300 recording at 1920x1080 and 60i frame rate) and I changed it from 59.94 to 29.97 and it corrected my video but now my audio is too slow. What can I change now to fix audio so that the video stays corrected?
View 22 Replies View RelatedIs this a known issue in Premiere Pro CC? I'm using version 7.2.1 (4).
The video clip in V1 has a reverse speed change applied, and the timecode filter is off by one frame. Or maybe the source overlay is off by one frame? Which should I trust?
I can split a part into 2 solid entities, I now want to rotate one of these entities with it's features say 30 degrees or whatever and then rejoin them as a newly shaped part.
I think all this is possible apart from rotating the split solid after splitting?
how can I rotate my split solid?
I'm writing code to split long part list in new sheets. Infact it's finished but very slow. Because each time I hide the line part list start to refresh itself...
I tryed to use
oDoc.DrawingSettings.DeferUpdates = True
But in this case I can only see empty part list on each page?!...
I just want to speed up process and I want to refresh part list view after than hiding process finished completely...
I have created 3 different sequences, and placed a clip into each one. I went into #s 1 and 2, and added a dip to black transition to the end of the clip in each. When I went to #3, I was unable to add the dip to the clip in there. Dragging the transition to the clip on the timeline gave me a had with a circle + slash. Double clicking the transition wit hteh clip selected did nothing. The layer is not locked.
View 5 Replies View RelatedI used to have this problem with CS5 and hoped it wouldn't happen again when I bought in to CC.
In the timeline certain audio tracks will not allow me to enable clip keyframes. When I try the 'add keyframe' button is greyed out. I can add track keyframes no problem but using them is a lengthy work around. The error also seems to be radom and trashing my prefs makes no difference.
Specs are:
iMac 27" 3.4GHZ i7, 16GB DDR3, Radeon HD 6790M 2GB
I have a project which requires a lot of different edits from the same clip.
Is there any way to do this without having to duplicate the same clip each time and then making my new edit?
For instance -
Clip 1 is 20 minutes long.
My first edit is from 1:10 to 1:35.
I then duplicate Clip 1 and make another edit from 2:40 to 3:55. I'm using Premier CS5.
I'm trying to replace the audio of a clip. I know I can easily delete the audio once it's in a sequence, but I'd like to replace the audio entirely so that the new audio is always on the clip as it's viewed in the project bins. You can edit in Audition for the clip, but thre doesn't seem to be a way to save the changes.
View 3 Replies View RelatedIs it possible to search the timeline for a clip, like you can do in FCP?
View 8 Replies View RelatedWhat do the zig zag lines mean on a clip in Premiere pro? And how do I fix it as I can't see a video image for that clip?
View 12 Replies View RelatedI saw YouTube video where a guy cropped down a video and then he somehow selected only the edge of the frame and somehow stretched it to extend the background over. The effect was that he made some junk at the side of the frame go away without effectively zooming in on his main subject matter.
I am unable to find this video now. I know how to do it in Photoshop. Just use the Rectangular Marquee Tool and select the edge of the image, copy to a new layer, and stretch it out. I've got to imagine the steps are similar for a video - just need to know which tools to use.
I had a multicam clip already created and have edited it into many sequences. I loaded it into my source monitor and accidently unchecked the enable option. Now that same sequence is no longer a mutlicam clip and when I load it into the source montior, my system crashes. is there any way to make it back in to a multicam clip?
View 2 Replies View RelatedIn CS6, is it possible to navigate between clip markers in the timeline.
I'm talking about markers placed on actual clips, not markers placed on the sequence timeline.
I'd like to have a shortcut to navigate between clip markers but that shortcut seems to only work on markers placed on the sequences timeline, not on the clip.
Yes, you can open the clip in the source monitor, then jump to clip markers for that one clip but that's not what I'm after.
I want to mark my clips in the source monitor, bring all those clips to one timeline, then navigate between the markers placed on the actual clip.
When importing MXF files they are all playing/acting like one clip. When playing in the preview or dragging to timeline.
View 4 Replies View RelatedI'm on a macbook pro and it seems that I cannot move a clip by selecting it and entering + or - and a number. This can be accomplished with a full sized keyboard by using the number pad on the right, but cannot be accomplished by using the regular laptop keyboard. Am I missing something? Is there a way to edit the keyboard shortcuts to do this?
View 2 Replies View RelatedIf you double-click on a clip in a Timeline it will open in the Source Monitor.
That feature is sometimes confusing, because if you do it by accident and think that you are viewing your source clip and set a new Mark In after the original Out point, the clip will disappear from the Timeline.
Is there a good reason for that feature or is it a bug?
I have a short 5min film for a student film fest, all the audio and visual plays perfectly in the timeline. However, when exported, the last audio clip (which is a 'button' and comes after two soundless title slides) does not play at all. Again, it works perfectly in timeline. All audio files are .WAV and I've tried exporting it in several different fashions, none of which have made a difference.
For the film fest I need to export in 16:9, Apple ProRes 422 (HQ). I tried this, among regular Quick Time export, Vimeo export, and others...every single export the audio on the 'button' didn't play at all but the clip is there.
Side Note: I tried adding low volume audio to bridge the last clip to the button to see if that made a difference so there would be no gaps in the audio timeline, but it did nothing.
When i try to drag a clip into the sequence, a prompt comes up saying Adobe Premiere Pro has stopped working!
i have a project due in a few weeks and i cant rely on windows movie maker!
I am running it on a HP Probook 450 with Windows 8.1 64 bit.
I have a video that has an object with a logo on it I need removed. If I could work with each frame like in PS, it would be a 2 second fix for each frame. Does Premiere have a feature like this, or how do the pros blur out or delete unwanted logos or images that infringe on copyrights quickly and easily?
View 9 Replies View RelatedI have a video clip that I have edited, and once it finishes exporting, I cannot open it in any video playing application. Upon checking the file's Properites, it says that it is a 24 byte file... this can't be right. In the Export Settings window it says that it's several gigabytes!
I'm using a custom built PC, running the most up-to-date version of Windows 8. I have a quad-core Intel Ivy Bridge Processor, AMD HD Radeon 7770 GPU, 8 GB of 1600 MHz RAM, a 256 GB SSD running the OS and frequently used applications, and a 1 TB HDD. I am running Adobe Premiere Pro CS6 and it is completely up to date.
I have been digitally converting old VHS, 8mm, and miniDV tapes. I have a digtial converter that has Composite ports and an S-Video port on it. It connects to the computer via USB. I have a program called Debut Video Capture that records the video and saves it as an uncompressed .mp4 video file. Premiere Pro also has another issue where the audio and video are always out of sync because it can't seem to handle videos with variable framerates, so, I open the videos in Quicktime 7 Pro, and save them as a Reference Movie—This makes it so the videos are at a constant framerate. I take these files and import them into Premiere Pro. My sequence is DV - NTSC Standard 48kHz (the videos are all in an old 4:3 format). I'll drop the clips into the timeline and edit them, edit out the blue screens and splice different clips and such, lower the volume, and slightly increase the Scale in the Video Effects.
When everything is done... I'll open up the Export Settings.
I set the Format to H.264 and Preset to NTSC DV or NTSC DV Widescreen depending on the ratio of the video. Some of the videos are very long (1 Hour or longer... one video is almost 4 hours long). I will go down to the Bitrate Settings and change the Bitrate Encoding to CBR, and set the Target Bitrate to a reasonably high number. I try to have a minimum of 10 Mbps, or if the video isn't that large, I'll set it to 14. If the Estimated File Size is over like 3 GB (I'm not sure of the number, but it works for these long videos when they're under like 3 GB). If the videos go over, they'll encode for an hour or longer and when it's done, it will save and appear as a 24 byte file.
The only thing I've got is to make the Target Bitrate very small, that's the only way the videos will encode, but then the quality degrades...
I'm running Premiere Pro CS5 on Win7 x64. I have an MP3 audio clip that I've selected a sub-clip from, as you can see here:
When I click on the insert button, everything to the right of the insertion point on the timeline is pushed to the right, as if the clip were inserted, but the clip doesn't show up anywhere (I've scrolled up and down through both the audio and video tracks), as you can see here:
I'm contemplating purchasing a Mackie MCU to automate some of the volume edits I have to make using 5 tracks in the Audio Clip Mixer over 80 hours of video. I've tried to contact Adobe support, but they are about as cluless as a bag of hammers. When I asked if the clip mixer works with a control surface (after 4 calls and 4 different agents) I was told no. Which is total BS as there is toggle in the clip mixer called "Toggle Control Surface Clip Mixer Mode". They read from scripts and have no clue what they are talking about. I guess I should not be surprised as its an outsourced call center staffed with drones who have never even used the software, much less in production! Adobe you should be ashamed of your support, it's appauling! (BTW I own an online Magazine in the 3d industry and will be writting an article about your appauling support soon)
Anyway, onto my specific questions:
1) The Mackie MCU has overlay cards for button mappings for many different apps, but PP is not one of them. What functionaliy is mapped to the control surface specially from PP and the clipmixer?
2) Is there a way to group channels so that keyframes can be written to multiple clips at the same time by using one fader?
3) In the clip mixer there is a keyframe toggle, does such a toggle translate to the control surface?
4) Sometimes I want to manually keyframe, rather thanan make adjustments while the playhead is moving, so I will simply click the fader slider to write a keyframe, manually move the playhead and then adjust the fader to write the subsequent keyframes. As faders on a control surface can not be pushed like a button, is there a way to generate a keyframe from the control surface?
5) Are there any known limitations using the control surface vs the software for both the clip and track mixers?
Sometimes when working on a timeline, I come across a clip that needs to be reshot or otherwise modified.
Now I could use a marker but markers don't stick to clips and don't have any visible flyouts like in Vegas, making labeling rather pointless.
So the next idea would be to change the color of the clip on the timeline so it is 'at-a-glance' visible that it needs to be dealt with before the sequence is pumped out.
Kind of like a highlighter in a text document.
Before submitting it to wishlist, I'm interested in hearing thoughts of other users.